Reviews Pipe Tubing

Rapid Repair RP77271 1/8 Inch to 1-5/8 Inch Outside Diameter Pipe and Tubing Reamer, Red (Single Pack)

  • Removes burrs on tubing from 1/8 inch to 1-5/8 inch outside diameter.
  • NOTE FOR USE: Little pressure is needed to deburr smaller pipe and tubing, too much force will cause damage to the pipe or tubing.
Check Stock

Brass Compression Tube Pipe Fitting Connector, Straight Coupling Adapter,1/4\ Tube OD x 1/4\ NPT Male Connector 5pcs (1/4\ OD Compression x 1/4\ NPT Male)

  • Tube OD Compression to NPT tube adapter for converting Standard National Pipe Thread (NPT) pipe to Aluminum, Plastic, and Copper straight compression thread pipe Tubing..
  • Heavy-duty brass construction with rust proof, corrosion resistance, high temperature ductility and low magnetic permeability.
Check Stock

Beduan Pneumatic Tubing Pipe 5/16 OD Clear Air Compressor PU Line Hose Tube for Water Fluid Transfer 12Meter 39.4ft

  • PU Tubing Pipe Material: PU( Poly Urethane ).
  • PU Tubing Pipe Size: 5/16" (Outer diameter) , 3/16" (Inner diameter). Package Total Length:39.4 Feet (12meters).
  • Tubing Pipe Working Temperature: -4℉-176℉（-20℃--80℃),） Stretch Resistance: 400kg/cm2.
  • Tubing Pipe Features: Excellent flexibility, Small bending radius.
  • Wide range for working temperature and pressure.
Check Stock

Tubing Bead Roller Tube Pipe Tubing Beader Tool Intake and Intercooler Piping Fits 5/8″

  • Simply insert the end of the tubing between the dies and start cranking the turning handle.This vise-mounted tool will form a perfect bead on the end of aluminium or copper tubing..
  • Aluminum, steel or stainless steel Intercooler pipe Fits 5/8″ and larger tubing..
  • Aluminum pipe: diameter from 5/8″(16mm) to 4″(102mm),max thickness 3mm.
  • Steel pipe: diameter from 5/8″(16mm) to 4″(102mm),max thickness 1mm.
  • By turning the handle on the side of the tubing beader tool, you can form a desired bead on the end of aluminium or copper tubing..
  • Works best when secured in a vice.Please Note: Always apply the bead before welding..
Check Stock

Beduan Pneumatic Tubing Pipe 3/8\ OD Blue Air Compressor PU Line Hose Tube for Water Fluid Transfer 10Meter 32.8ft

  • PU Tubing Pipe Material: PU( Poly Urethane ).
  • PU Tubing Pipe Size: 3/8" (Outer diameter) , 1/4" (Inner diameter). Package Total Length:32.8 Feet (10meters).
  • Tubing Pipe Working Temperature: -4℉-176℉（-20℃--80℃),） Stretch Resistance: 400kg/cm2.
  • Tubing Pipe Features: Excellent flexibility, Small bending radius.
  • Wide range for working temperature and pressure.
  • Excellent chemical properties, Minimal pressure loss.
Check Stock

RCB-1625 Replacement Blade for RI-DGID RC-1625 Pipe Cutter Blade, Tubing Cutter and Ratcheting Plastic Pipe 27858 Model - Cutting Pipes 1/8-inch to 1-5/8-inch O.D. (2 Pack)

  • ▶Replacement Blade◀ Compaitble With RI-DGID RC-1625 Ratcheting Plastic Pipe and Tubing Cutter, for Ri-dgid 27858 RCB-1625 replacement blade is made to be used with The Ri-dgid 23498 ratchet action plastic pipe & tubing cutter..
  • ▶ Easy installation:◀ Since the blade is fixed with screws, the package includes 2 replacement blades and 2 screws for installation and fixing, which is convenient to install and replace the old blade..
  • ▶ Wide range of applications:◀ This is a replacement blade for ratchet pipe cutters, suitable for cutting most plastic pipes (PPVC, CPVC, PP-R, PEX, PE, rubber hose, etc and multilayer tubing Replacement blade only..
  • ▶with for:◀ This replacement pipe cutter blade for the RC-1625 Ratchet Cutter is ideal for pipe 1/8-inch to 1-5/8-inch O.D and multilayer tubing. The premium blade design combined with the pipe cutter's ratchet mechanism reduces the hand force required to cut hard plastic materials.
  • ▶Note:◀ To avoid machines that are not suitable for you, please check the user manual to check your model, if you have any questions in use, please contact us in time, we will reply you within 24 hours..
Check Stock

SharkBite 1 Inch x 300 Feet White PEX-B, PEX Pipe Flexible Water Tubing for Plumbing, U880W300

  • SHARKBITE WHITE PEX-B PIPE: This SharkBite white PEX-B pipe is available in coils up to 1,000 feet in length, allowing longer runs and fewer connections to save time, money, and potential leak points.
  • FREEZE RESISTANT: This flexible PEX tubing expands and contracts as water freezes and thaws within the pipe.
  • ideal for hot and cold potable water distribution, fire protection, and municipal water service lines.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass PEX water tubing offers faster installation compared to rigid pipe, six-month UV resistance, and the highest-rated chlorine resistance.
  • PREFERRED BY THE PRO: This portable PEX pipe is certified to meet ASTM F2023 oxidative-resistance requirements for continuous hot water recirculation.
  • approved for water service lines and burial applications including being buried under concrete.
  • SPECS: SharkBite water pipe tubing features a minimum working temperature of 33 degrees F at 160 PSI, a maximum working temperature of 200 degrees F at 80 PSI, and a maximum working pressure of 160 PSI at 33 to 70 degrees F.
Check Stock

iCrimp Copper Tubing Cutter, 3/16-inch to 1-1/4-inch Tube Cutter, for Stainless Steel, CSST Tubing Cutter with 2 Pack Replacement Blades

  • Metallic Tubing Cutter: CT-532 pipe and tubing cutter is designed for cutting copper, brass, aluminium, thin-walled steel, 5-32mm(3/16’’ to 1-1/4’’). Made from aluminum alloy and Wear-resistant steel blades ensures a durable and sturdy usage.Ergonomic knob reduce fatigue..
  • Neat Cutting: This pipe cutter makes fast, easy cuts in standard pipes. With clean, no burrs and smooth cuts on copper tubes and corrugated stainless steel tubing without deforming the peaks of corrugations..
  • Smooth Operation: Professional Tubing Cutter features an accurate 6-roller tracking system. This keeps the tube from threading and helps eliminate spiraling. The rollers and the blade utilize ball bearings for smoother action on thin stainless steel, all soft tubes like aluminum, copper, and PVC..
  • Free Cutter Wheel: Replacement blade is constructed with high carbon steel for long life. Precision grinding delivers a sharp cutting edge. Optimized for cutting copper tubing..
  • Applications: Perfect for industrial plumbing, HVAC applications, this pipe cutter high grade cast malleable steel frame and hardened alloy steel rollers for added durability. Also ideal for installation of Sharkbite Push to Connector fittings when creating copper tubing diversions..
Check Stock

BoCID Tube Pipe Hose Bead Roller Intake Intercooler Piping Compatible with Clamps 5/8″ DIY Tool

  • This vise-mounted tool will form a perfect bead on the end of aluminium or copper tubing. Simply insert the end of the tubing between the dies and start cranking the turning handle. Give the wheel a quarter-turn with each full rotation of the tubing to gradually tighten the dies against the tubing..
  • Aluminum, steel or stainless steel Intake pipe -Aluminum, steel or stainless steel Intercooler pipe.
  • This his sturdy and cost effective tool makes it easy to add a professional looking bead to all types of tubing. Great for Aluminum up to 16 gauge wall thickness (0.065’’ or 1.65mm) and also suitable for Titanium up to 18 gauge (0.049’’ or 1.25mm)..
Check Stock

CG2-11 PIPE CUTTER MAGNETIC GAS MACHINE TORCH BURNER BEVELER CUTTING PIPE BEVELING ​MACHINE

  • 【Perfect Set】The set includes a heavy duty tube cutter, mini tubing cutter and an inner-outer reamer. It can not only meet your pipe cutting need, but also fast clean inner reaming and outer deburring needs. The pipe cutting tool is very suitable for cutting pipes of aluminum, copper, PVC, thin stainless steel tube..
  • 【Exquisite Craftsmanship】MATEWORK professional heavy duty pipe cutter is made of high-quality aluminum alloy & SKD steel with high hardness up to HRC52. It has 6 pieces of individual bearings allowing for increasing cutting speed. Precise rolling control makes every cut smoother and more accurate in pipe cutting. After many tests, the cutting capacity up to 3/16 to 2-inch outside diameter with the thickness of 1/6-inch..
  • 【Meet Your Needs At Any Time】Mini tubing cutter is Specially designed for small diameter tubes in confined spaces, cut through 1/8 to 7/8-inch outside diameter pipes with a maximum thickness of 1/10-inch especially for use in restricted areas where a complete turn is not possible, improve your work efficiency..
  • 【Deburring Tool】Pipe reamer has 3/16 to 1-5/16 inch outside diameter capacity. It can be quickly, cleanly and conveniently applied to the inner diameters of copper, aluminum, PVC and soft steel t....
Check Stock