Reviews Pipe Fitting Adapter

SpringSpray 1-1/2\ NPT Male x 1-1/2\ NST (NH) Male Brass Hexagonal Nipple Fitting Fire Equipment Hex Nipple Doule Male Fire Hose Adapter

  • ⚒【PREMIUM MATERIAL】- Made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. The Fire Equipment Hexagonal Nipple Fitting offer long-term service.
  • ⚒【CONNECTION SIZE】- Hex nipple fitting 1-1/2" NH/NST to 1-1/2" NPT double male fire hose adapter. Male 1-1/2 inch NH / NST will only connect to a female 1 1/2 inch NH / NST.
  • Male 1-1/2 inch NPT will only connect to a female 1-1/2 inch NPT/NPSH.
  • ⚒【UNIQUE DESIGN】- With hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench. Hex tube fitting as a short length of pipe with threaded ends for connecting threaded pipes.
  • ⚒【WIDE APPLICATION】- Male to male adapters are used to bridge two female hose, pipe or valve fittings. Suitable for use in general firefighting applications. Brass fire hydrant adapter fittings are used for connecting fire hose, PVC pipe, and other low-pressure pipes in the fire brigade, industry, refinery, building industry, agriculture, shipping, military, and civil protection.
  • ⚒【100% SATISFACTION SERVICE】-We have a professional product development team. If you have any questions about compatibility or any dissatisfaction, please feel free to contact us and we will help you ....
Check Stock

2-Pack Besosay Brass Reducer Hex Bushing Threaded Pipe Fitting 1 Inch NPT Male x 3/4 Inch NPT Female Adapter

  • ✅ SPECIFICATION - Standard brass pipe fitting 1" NPT male to 3/4" NPT female reducer adapter. For connecting pipes with different ends size..
  • ✅ MATERIAL - This brass reducer bushing adapter is made of high quality brass for corrosion resistance, high temperature ductility and low magnetic....
  • ✅ EASY INSTALLATION - The deep threads design allows the fittings to be better engaged with the object to enhance fixation, and the smooth threads....
  • ✅ OPERATION PRESSURE & TEMPERATURE - Max. Pressure: 150 PSI ,Temperature range：-65 to 250 F..
  • ✅ PLEASE TAKE NOTICE - This pipe fitting can not be installed for potable water use. And, NPT thread size does not actual diameter, it is only....
Check Stock

Spears 1435 Series PVC Tube Fitting, Adapter, Schedule 40, Gray, 2" Barbed x NPT Female

  • Adapter for connecting pipes or fittings of different types.
  • Fitting connects to schedule 40 PE pipe on one end and has an NPT female connector on the other.
  • PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
  • Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
  • Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.
Check Stock

BathAce Brass Reducer Hex Bushing Threaded Pipe Fitting Heavy Duty Threaded Pipe Fitting Adapter 3/8 Male NPT x 1/4 Female NPT 5

  • MATERIAL: Made from Premium solid brass, durable, thicker and rustproof. It is perfectly suitable for hose systems as it can withstand long periods of....
  • FUNCTION: Standard 3/8" Male NPT to 1/4" Female NPT. The brass fitting is an adapter for connecting pipes with different diameter..
  • TEMPERATURE: Operating temperatures range of -65°F to 250°F ( -53°C to 121°C)..
  • WIDELY APPLICATION: This pipe fitting can apply to plumbing connections, natural gas, refrigeration and hydraulics, etc. Easy tightening and....
  • BRAND ADVANTAGE: BathAce is a professional brass pipe fitting manufacturer, aim to produce stronger performance product..
Check Stock

Tecmolog Brass Pipe Fittings Connector G 1/2 Female Thread (Metric BSP) to US 1/2 NPT Male Thread Pipe Fitting Converter Adapter, SBA037

  • BSP to NPT Adapter: Metric BSP 1/2" (G) female to NPT 1/2" male pipe fitting converter, easily change from standard EU metric to US inches.
  • Brass Pipe Fittings 1/2: This adapter is made of brass for resistance to corrosion, ductility at high temperatures, and low magnetic permeability.
  • Rubber Washers and Teflon Tape for a Perfect Seal: Come with an o-ring for the G1/2 side and the 1/2 " NPT side to produce a leak free connection.
  • Connect Hoses or Fittings of US plumbing: This is used to adapt the plumbing to NPT on bath or kitchen fixture, and European hose fittings.
  • Easy to Install: It has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench.
Check Stock

Raven R1508 PVC Termination Vent, 2 inch, White

  • Patented – unique slot on the side of vent cap allows water condensation to drain.
  • Simple – no efforts required, vent easy to install inside hub of PVC fitting adapter (not included).
  • Tough – stainless steel won’t corrode or rust, Type 304 mesh screen prevents leaves, debris and wildlife from entering vent pipe.
  • Airflow – no obstruction to vent allows maximum airflow.
  • All vent types – furnace, water heater, air, intake, exhaust, and roof vents and water drains.
  • Fittings – Please note that hub fitting adapter is not included and must be purchased separately – check for compatible sizing.
Check Stock

uxcell PVC Barb Hose Fitting Connector Adapter 16mm or 5/8

  • APPLICATION.The adapter’s barbed fitting creates a tight seal on flexible PE pipe when used with a hose clamp (sold separately)..
  • ADVANTAGE.An O-ring is delivered to the end of each joint thread, eliminating the need for a sealant or raw tape.
  • HIGH QUALITY MATERIAL. made of PVC ,have Alkali resistance, high temperature resistance, corrosion resistance, strong anti-aging, high strength, no break..
  • -30 degree to 100 degree F temperature range..
  • BARB HOSE FITTING.has a male National Pipe Thread (G) thread on one end and a barbed insert on the other.
  • Size: 16mm or 5/8″ Barb x 3/4″ G Male.
Check Stock

PVC Termination Cap Mesh Screen Vent Cover, Furnace & Roof Vent Cap, Stainless Steel Wire Round Exhaust Pipe Cover End 4

  • ...nch and the outer diameter measures 4.5" inch, therefore any pipe connected with mesh pipe cover WILL NOT FIT so adapter such as PVC / rubber elbow or coupling must be purchased separately (not included) - please see listing images and infographic below for more details on compatible size to ensure correct pipe cap fitting.
  • PRODUCT PATENT: PVC drain screen cover with wire round mesh screen built in slot allows water condensation to drain out on the side of the PVC vent screen cap attached to the exposed pipe outdoor through the ground, wall, or roof as shown in the listing images and infographic.
  • SIMPLE & COMPATIBLE: mesh screen vent cover is easy to install and no effort is required by inserting the termination vent cap inside the hub or adapter of the PVC / rubber elbow or coupling (not included) compatible with pipes connected to high efficiency furnace, steam, water heater, air intake, exhaust, roof vents, sewer and water drains.
  • TOUGH: the white stainless steel termination vent mesh screen cover is the best pipe cover for outdoor that won't corrode or rust preventing leaves, debris, birds, bugs, and wildlife from entering the mesh screen vent pipe cover.
  • AIRFLOW: PVC pipe cover works as pipe screens with stainless steel mesh screen cap that allows m....
Check Stock

AC PERFORMANCE Stainless Steel -3 AN 3/8x24 Male Flare Union Splits Tee Block With Lug/Mount Tab/Locator, -3 AN to 2x AN3 Male Flare Coupling Union All Sides Hose Fitting

  • Male -3 AN to 2 x -3AN Flare (JIC -3, 3/8×24 thread) with Tab T Pipe Tee Block Hose Fitting Adapter.
  • Works with -3AN TEFLON PTFE Brake and Clutch Hose / Line, Design For Drift / Hydraulic Hand Brake application.
  • AN Male Flare Tee Tube Fitting with Locating Lug Mount Hole.
  • Male -3AN flare all sides Tee cross 3 ways pipe with lug tab locator SL fitting connector.
Check Stock

letsFix PVC Elbow Fittings 1 1/4 Inch, 3-Way/4-Way/5-Way PVC Connectors for SCH40 1 1/4 Inch PVC Pipe - Build Heavy Duty PVC Furniture and Plumbing Projects Available, White [Pack of 4]

  • 【Premium Quality】Made of high quality plastic material, the fitting is able to withstand impact, not easy to crack or break..
  • 【PVC Fitting Size】This 5-Way PVC pipe fitting size is schedule 1 inch socket ,it's Ideal for Center Connections..
  • 【Widely Use】This PVC Pipe adapter is use for agricultural irrigation, soilless cultivation systems, furniture, shelves, pool products, DIY shelves products, spa, potable water, and chilled water applications..
  • 【Easy to Install】PVC is lightweight, easy to install, requires no special tools for cutting and is installed by solvent cementing..
  • 【100% Promise】Replacement or full refund can be provided if you are not satisfied with our 5 way PVC fitting..
Check Stock