Reviews Pipe Bending Part

Antstone Tubing Bender Kit with Reverse Bend 1/4"-7/8" HVAC Ratchet Copper Pipe Bender Tool Set 90° Bend with 7 Dies for Refrigerator Air Conditioner Repair

  • [Parameters] - Applicable pipe outer diameter: Φ1/4'', 5/16'', 3/8'', 1/2'', 5/8'', 3/4'', 7/8''.
  • applicable pipes: for soft copper / brass pipes only..
  • [High Efficiency] - This pipe bender can be operated with one hand. You can save time and effort and improve work efficiency..
  • [Forward & Reverse Bending] - The pipe bender can be bent in both forward and reverse directions to meet the needs of your different workplaces..
  • [Compact & Portable] - This hvac tool kit has a compact design, making it easy to work in tight spaces, which includes: pipe bender body*1, deburring knife*1, bending groove*2, dies*7, thicken toolbox*1..
  • [Wide Application] - This tubing bender is widely used for HVAC, refrigerators, automobiles, hydraulic and pneumatic systems maintenance, etc..
Check Stock

Reed Tool H4S Hinged Steel Pipe Cutter, 4-Inch, Red

  • Designed for rapid cutting of 2-inch through 4-inch steel pipe.
  • Operates with minimal cutter rotation as necessary for tight quarters.
  • Clean cut with limited crimping or bending.
Check Stock

M40 1 1/2 Inch Stainless Steel Rigid Pipe Hole Strap,with 2 Holes Cable U Bracket Clamp Hanger，Heavy Duty Rigid Pipe Strap Clamp 30 PCS

  • 【Material】Made of 304 stainless steel. After punching, bending, and integral molding, the reinforcing rib structure is added to improve the....
  • 【Secure Conduit】Ensure that your conduit is safely secure with these 2-hole EMT Pipe Straps that feature reinforced holes and a reinforced rib for....
  • 【Reinforcing Rib Design】The middle part is prominent, larger load bearing, to make pipe strap not easily to deformed during using..
  • 【Application】Pipe clamps use to secure rigid or IMC conduit to wood, masonry, widely used in fixed pipeline such as stainless steel pipes, rubber....
  • 【Easy to Install】 Two Holes u bracket easily secure piping to studs or joists to reduce vibration noise, great improves its safety.
Check Stock

Bonvoisin 3/8 1/2 OD Tubing Bender 2 in 1 Manual Pipe Bender 180° HVAC Soft Copper Aluminum Pipe Bending Tool for Air Conditioning Refrigeration Repair

  • [Parameters] - Application: only for copper / aluminum pipes.
  • [High Quality] - The tube bender is forged from high-quality carbon steel, which is light and durable.(NOTE: if the pipe wall thickness.
  • [2-in-1] - This tubing bender tool is a 2 in 1 tool and will fit 3/8’’、1/2’’ tubes, which is convenient for different size tube bending and....
  • [Humanized Design] - (1)The manual pipe bender uses the principle of leverage, with which you can easily bend the pipe. (2)The round hole of the upper....
  • [Wide Applications] - This pipe bender is suitable for HVAC, air conditioning, and refrigerator pipe repairs..
Check Stock

KAKA Industrial Heavy-Duty Hydraulic Roll Cage Tube Bender, Solid Construction and High Precision Metal Tube Bender (HB-10)

  • More space can be saved through removing the leg and hand pump.
  • at the same time, it is easily to storage if you have limited space.
  • The hydraulic pipe bender is build with heavy material that can last for many year demanding use.
  • The bending capacity can up to 10 ton that will satisfy most of the projects. It is a great tool for any pipe bending work shops.
  • Six standard dies are included in a way to increase the flexibility of bending.
  • the size of those dies are 1/2" , 3/4" , 1", 1-1/4", 1-1/2" and 2" respectively.
  • The HB-10 pipe bender has been designed for years of trouble free use under the most demanding conditions and it would be a money saver from long term perspective.
Check Stock

W4-Moto 12 Ton Heavy Duty Hydraulic Tube Bender 180 Degree Tubing Metal Steel Iron Exhaust Pipe Bending with 6 Dies Sets 1/2",3/4",1",1-1/4",1-1/12",2" (RED)

  • 【Stable Base & Solid Structure】Made of premium steel, this tube bender is heavy duty to hold up to 12 ton weight capacity. And the hydraulic system and pull-back spring system help you get the bending job done efficiently.Tube bender is suitable for most kinds of metal tubes, and it can easily and efficiently help to bend any type of pipes. Therefore, it is popularly used for power construction, road building, bridges or ships pipeline laying or repairing..
  • 【6 Adjustable Roller Levels 6 Dies】Bending bars can easily be adjusted to distances of 8-1/2", 11-1/4", 12", 16-3/4", 19-1/2" and 22-1/2", so you can adjust the top rollers for degree of bend to meet the bending angle of the tube.Except the pipe bender, the package includes 6 precision cast dies of 1/2'', 3/4'', 1'', 1-1/4'', 1-1/12'' and 2". So you don’t need to buy dies, this pipe bender is able to fully meet all your needs..
  • 【180 Degree Bending】Compared to other bender that only can bend tube to 90 degree angle, our pipe bender can bend tubing to angles up to 180 degrees smoothly so that reduce your workload ....
Check Stock

3 in 1 Tube Bender - Yellow Jacket 60390

  • POWERFUL AND COMPACT: Bending soft metal pipes and tubing has never been easier. The proprietary design allows it to fit where others can't, while not compromising on the capability or quality of the resulting bend.
  • EASY TO SETUP: Place universal crossbar and desired color-coded mandrel on handle, snap into place, click pumping lever into ready position, and place tubing between bar and mandrel.
  • ONE-HANDED OPERATION: The ratcheting mechanism and innovative release lever allow for bending with one hand. Pump lever until desired angle is achieved, up to 90degrees. Simply press release trigger above lever to retract mandrel for easy tube release, ensuring no damage to the metal.
  • INCLUDED COMPONENTS: Bender body, crossbar, reverse bending attachment and mandrels for 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 7"8 tubing.
  • 【Complete accessories】: The pipe bender kit has a variety of tools to meet different needs. The kit includes 1 x Bender, 7 x Fiber Wheel, 1 x Pipe Cutter, 2 x Flip Arm, 1 x Trimmer..
Check Stock

VEVOR Tube Bender Max Bending Degree 240°,Heavy Duty Metal Pipe and Tube Notcher With 3 Dies,Tube Pedestal Bender 0 up to 240 Degree,Metal Working Tools and Equipment Overall height 45"

  • More space can be saved through removing the leg and hand pump.
  • at the same time, it is easily to storage if you have limited space.
  • The hydraulic pipe bender is build with heavy material that can last for many year demanding use.
  • The bending capacity can up to 10 ton that will satisfy most of the projects. It is a great tool for any pipe bending work shops.
  • Six standard dies are included in a way to increase the flexibility of bending.
  • the size of those dies are 1/2" , 3/4" , 1", 1-1/4", 1-1/2" and 2" respectively.
  • The HB-10 pipe bender has been designed for years of trouble free use under the most demanding conditions and it would be a money saver from long term perspective.
Check Stock

Bessey VAC-6 Angle Plates (6-Pack)

  • 【SIZE】- Fit Pipe Diameter: 14mm/ 0.55".
  • 【MATERIAL】- Made of 304 high-grade stainless steel. After punching, bending, and integral molding, the structure increases the rib structure to improve the strength of the pipe clamp. Fastened and durable.
  • 【APPLICATION】- Widely used in plumbing, petrochemical, power supply, and other pipeline laying, fixing all kinds of pipelines on wood, masonry, or similar surfaces.
  • 【USAGE】- Choose the corresponding inner height of the pipe clamp according to the OD of the pipe, determine the hole according to the hole dia and position of the pipe clamp, and lock the fastening screw. A layer of soft gasket can be placed on the inner side of the pipe clamp and the pipe fittings, the effect will be better.
  • 【PACKAGE CONTENT】- 20Pcs × Rigid Pipe Straps.
  • Note: Mounting screws are not included here.
Check Stock

Beduan Pneumatic Tubing Pipe 5/16

  • Wide range for working temperature and pressure.
  • Tubing Pipe Working Temperature: -4℉-176℉（-20℃–80℃),） Stretch Resistance: 400kg/cm2.
  • Tubing Pipe Features: Excellent flexibility, Small bending radius.
  • Excellent chemical properties, Minimal pressure loss.
  • PU Tubing Pipe Material: PU( Poly Urethane ).
  • PU Tubing Pipe Size: 5/16″ (Outer diameter) , 3/16″ (Inner diameter). Package Total Length:39.4 Feet (12meters).
Check Stock