Reviews Pinch Welding Clamps

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 8 clamps for larger projects, then joint weld between them.
  • [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • [Contents] Welding accessories set includes 8 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

MAXPOWER 4PCS Locking Pliers Clamp Set, 7 inch 90 degree Offset Locking Pliers, 7 inch Locking Pinch Off Pliers, 9 inch U Shaped Jaw Locking Pliers, 8 inch Locking Sheet Metal Clamp

  • 90° Jaw left angle locking pliers x 7" Length, Max opening capacity 2-3/4" (70mm), Throth Depth 2-3/4" (70mm), Long nose jaw make clamping and holding parts, nuts and bolts easier access into narrow and deep tight space.
  • Locking Sheet Metal Clamp x 8" Length, Clamping range of 1-3/16" mm (30mm), For tightening, bending and crimping thin sheet steel.
  • U-shaped Welding Pliers x 9" Length, Clamping range of 2-5/16" (60mm), For clamping profiled, pipes or flat material.
  • Locking Pinch Off Pliers x 7" Length, pinch-off and locks on to tubing, suit for blocking flow of gas, Use only to pinch off soft copper, aluminum or any soft metal tubing.
  • There's a hex Hole on knurled thumb screw for using with hex keys( NOT included ), Offering more tightens to adjust pressure and draw materials together.
  • MAXPOWER Locking welding pliers and clamps set, Constructed with chrome-vanadium steel jaws with nickel plated finish.
Check Stock

HEIHAK 3 Packs 18 Inch Large C Clamp Locking Pliers with Swivel Pads, Heavy Duty Vice Grip Clamp Set, Adjustable Welding Clamps Tools for Woodworking Welding

  • 10Pcs x Locking Pliers Set : included Long Nose Pliers (5in. 6in. 9in.).
  • Curved Jaw Locking Pliers (4in. 5in. 7in. 10in.).
  • Straight Jaw Locking Pliers (7in. 10in.).
  • 2Pcs x Locking C Clamps 11 inch : 3-3/8 inch Max Jaw opening capacity, Welding C clamp pliers with Regular Tip and Swivel Pad, Provide stronger gripping and clamping.
  • 3Pcs x Welding Clamps : included Sheet metal clamp 8inch, U-shaped clamp 9 inch, 90 degree Offset locking pliers 7 inch.
  • Total 15 different types and sizes heavy duty Pliers Set, come with a nice nylon tool bag, good for storage and ideal gift for professional welder.
  • There's a hex Hole on knurled thumb screw for using with hex keys, offering greater tightens to adjust pressure and draw materials together.
Check Stock

MAXPOWER 15-pieces Locking Pliers with C-clamps Set, Long Nose Pliers, Pinch Off Pliers, Sheet Metal Clamp, U Shaped Pliers with Tool Bag for Storage

  • 10Pcs x Locking Pliers Set : included Long Nose Pliers (5in. 6in. 9in.).
  • Curved Jaw Locking Pliers (4in. 5in. 7in. 10in.).
  • Straight Jaw Locking Pliers (7in. 10in.).
  • 2Pcs x Locking C Clamps 11 inch : 3-3/8 inch Max Jaw opening capacity, Welding C clamp pliers with Regular Tip and Swivel Pad, Provide stronger gripping and clamping.
  • 3Pcs x Welding Clamps : included Sheet metal clamp 8inch, U-shaped clamp 9 inch, 90 degree Offset locking pliers 7 inch.
  • Total 15 different types and sizes heavy duty Pliers Set, come with a nice nylon tool bag, good for storage and ideal gift for professional welder.
  • There's a hex Hole on knurled thumb screw for using with hex keys, offering greater tightens to adjust pressure and draw materials together.
Check Stock

Apollo Stainless Steel Crimp Clamp Tool - 1 Each

  • ICP-PC01 Pinch Clamp Removal Tool is specifically designed to remove Stainless Steel Pinch Clamps (not included) in the event of a mistake or need for a modification..
  • Compatible with any brand of stainless steel pinch clamps designed for use with PEX. Also ideal for removal ear clamps with Max. ear width 13mm..
  • Compound action cutting tool: maximum mechanical advantage for easier and safer use. High mechanical advantage makes clamp removal easier and reduces the risk of strain injury..
  • Designed to deliver many cutting cycles without loss of performance, using the lowest practical cutting force. Constructed of solid metal for long tool life, with textured grips for a more secure hold. Cinch clamp removal tool to be used in conjunction with the cinch rings to remove PEX cinch clamp rings. The tool provides a fast and quiet solution to removing PEX fittings and can be used in both home and commercial settings. Safely cuts PEX stainless steel clamps for quick fitting salvage..
  • A fitting that has been removed and is in good shape can be used in another system saving money. Avoid clamping on the insert ribs or barbed area, which will damage the fitting making it unusable. Ideal for stainless steel and steel clamps from Apollo, Oetiker, Watts, etc..
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Apollo PEX 69PTKG1096 3/8-inch - 1-inch Stainless Steel Pinch Clamp Tool

  • Use with Oetiker pex pinch clamps 3/8 in., 1/2 in., 3/4 in., and 1 in..
  • Also for use on Apollo pex and Murray pex pinch clamps 3/8 in. - 3/4 in..
  • Not for use with Zurn Qickclamp crimp rings.
  • Meets ASTM F-1807n What's In The Box:Conbraco 69PTKG1096 Pex Quick Pinch Clamp Tool.
Check Stock

OBPSFY 5 PCS Magnetic Welding Clamps Set,Adjustable V-Pads Fixture Clamp Hand Tools,Magnets On Both Pad Face and Bottom

  • 【Welding Clamp】* Hold tabs,pipe, gussets, plates and odd shaped pieces in position for tack welding.Light duty & tight spot holding! Build, Hold, and Position Steel.Magnetic tack welding Tool，make welding easier..
  • 【Strong Hand Tools】* Adjustable welding magnet, Magnetic welding holder, hold and position round, flat, and square parts in light duty substructure applications! Time saving magnetic tools for welding..
  • 【Material】* The magnetic welding clamps are made of high quality stainless steel, sturdy and durable, can be used for a long time.Magnets on both pad face and the bottom,Can hold the workpiece well for welding work..
  • 【Note】* Avoid Pronlonged exposure to high heat. The Magnets may demagnetize with temp. exceeding 185°F.（Heat Warning）.
  • 【Package】* 5 Pack Magnetic Welding Clamps（2" ，Pull Force 12 lbs.）.
Check Stock

KEILEOHO 6 Pack 11 Inches C Clamp Locking Pliers with Swivel Pads Heavy-Duty Locking Pliers Woodworking Clamps Set Adjustable Nickel Plated C Pliers

  • 6 PCS VALUE PACK - This welding clamp tools set includes 6 heavy-duty C-clamps with sizes of 11 inches, all are made of high-quality nickel-plated alloy steel, which makes them durable and robust, and feature wide opening jaws for greater versatility in clamping a variety of shapes..
  • ADJUSTABLE & SWIVEL PADS - Our adjustable wood working locking pliers provide the versatility of standard locking pliers. Simply turn the screw to adjust the grip, which stays adjusted for repetitive use. Swivel pads hold tapered work, awkward fabricating jobs, and delicate projects without damaging the work surface..
  • PREMIUM MATERIAL - Built with nickel plated alloy steel, these C-clamp locking pliers are designed to be the hardest working tools in your kit. With professional clamping force that won't slip along with forged and hardened alloy steel jaws, our C-clamp welding tools are durable and built to last..
  • TORQUE LOCK DESIGN - Anti-pinch ergonomically designed handles of the C-clamp locking pliers provides comfortable using experience. The contoured handle aids in the torque-lock design, resulting in a secure hold. The hardened wide jaws with better grip force on jobsite material, suitable for wood working, welding and more..
  • WORRY-FREE SHOPPING - Please do not hes....
Check Stock

FOITECHY 4 Pcs Magnetic Welding Clamps,Adjustable V Type Welding Clamps,Adjustable V-Type Fixture,Magnetic V Pads Kit, Magnetic V-sharp Tab Holder Corner for Tack Welding

  • 1.djustable V-Type Fixture Clamp: Magnetic welding clamps provide secure gripping power for rapid,hold and position round, flat, and square parts in light duty substructure applications.
  • 2.4 Pack strong hand magnet(XDV4: 2"),Pull Force 12 lbs. Our V-type magnetic welding clamps are made of high quality stainless steel, sturdy and durable, can be used for a long time.
  • 3.The V-type magnetic welding clamps are suitable for holding tabs, gussets, plates and odd shaped pieces in position for tack welding. They are widely used in doors, tool boxes, windows, wooden boxes, furniture, and other equipment..
  • 4.Heat Warning: Avoid Pronlonged exposure to high heat. Rare-earth Magnets may demagnetize with temp. exceeding 185°F.
Check Stock