Reviews Pinch Point Forming Dies

TEMCo Industrial Hydraulic Cable Lug Crimper TH0005 V2.0 (11 US TON) 10 AWG to 600 MCM Electrical Terminal Cable Wire Tool Kit with 32 Die Sets

New for 2020, TH0005 Version 2.0. Released September 1st 2020, all units now include the following improved features:.
TRUE-HEX Crimp Forming dies apply uniform pressure on all sides for even compression and high pull out resistance..
16 Standard size dies for American Wire Gauge 10 through 600MCM. Dies conform to DIN industrial standards and are compatible with all US domestic market terminals, including color coded lugs. Dies imprint the size into the crimped terminal for code compliance inspections..
16 additional plus size dies cover the hard-to-fit non standard lugs like heavy cast or thin-wall terminals. All 32 dies are black oxide coated, Won’t chip or flake like chrome plated versions..
Capable of crimping all battery and welding cable, building wiring, crimp terminal lugs (including heavy cast lugs) combined with a 5 Year Warranty from a well-known American name..

Handheld Extruder includes 5 Dies and 1 Blank die made of stainless steel..
The barrel unscrews and you fill it with clay, then use the extruder like a calking gun..
Hollow die set available Product number: H-EXTRD-HDS.
The 4 IN 1 Extruder die set comes with 9 dies and 1 block out die. H-EXTRD-4IN1.
Hand held extruders are great for forming anything from coils to small slabs and can be used in a variety of construction techniques.

TUBE AND DIE SET STABILIZING ARM for easy tube forming.
MAGNETIC ADAPTER holder keeps adapters in place.
EQUIPPED WITH AN ENGLARGED DIE SET COMPRESSION AREA for better grip of dies.
THIS TOOL CAN BE USED ON "annealed steel" & "dead soft".
INCLUDES 3/16, 1/4, 5/16, 3/8 and 1/2" dies 3/16, 1/4, 5/16, 3/8 and 1/2" double flare adapters and 37˚ cone packaged in a blow molded case.

Rated For 3/16" Mild Steel. Recommended Minimum Forming Tonnage: 13..
Eight Dimple Dies: 1/2", 3/4", 1", 1-1/4", 1-1/2", 1-3/4", 2", 2-1/2". (Actual Hole Size).
This dimple die set creates flared holes most commonly used on automobile parts fabrication. Cut out holes inherently provide reduced weight of the work piece, and these dimple dies create rigidity by flaring the holes..
Die Material: Punch Grade Hardened Tool Steel, Black Oxide Finish..
This dimple die set works with a hydraulic driver and cylinder tool most commonly used with hydraulic knockout sets like our TEMCo THA043 and TH0372..

Lightweight hand-held hydraulic press is very portable and ideal for shop and field applications. Comes with a complete set of dies covering hose....
Dies snap quickly into the press fixture requiring no pins or screws..
Warning: do not move the piston without pressing a hose and joint. This may damage the tool and also be careful not to pinch any of the hands near the....
Perfect for crimping barbed and beaded fittings..

Made of ductile cast iron and heat-treated steel dies | Extra thick die carriage and a thicker hinge point for extra strength | Dies are compatible with dies available from other brands.
Comes with five dies for crimping | Die Sizes: 0.48", 0.52", 0.58", 0.62", 0.67".
1/4" One Braid, 5/16" One Braid, 5/16" Two Braid, 3/8" One Braid & 3/8" Two Braid PVC & Rubber Hoses can be crimped with this crimper | Mounting Holes for permanent benchtop installation.
F7327: Length: 1.0 Inch | I.D: 0.625 Inch | Hole: 0.437 Inch | Wall Thickness: 0.025 Inch | Material: C46500 Brass | 50 per Pack.
F7328: Length: 1.0 Inch | I.D: 0.656 Inch | Hole: 0.437 Inch | Wall Thickness: 0.025 Inch | Material: C46500 Brass | 50 per Pack.

TUBE AND DIE SET STABILIZING ARM for easy tube forming.
MAGNETIC ADAPTER HOLDER keeps adapters in place.
EQUIPPED WITH AN ENLARGED DIE SET COMPRESSION AREA for better grip of dies.
CAN BE USED ON "annealed steel" & "dead soft".
INCLUDES dies and adapters to fabricate push connect 1/4, 5/16 and 3/8".
GM fuel line flare, brake lines and transmission 5/16 and 3/8".
flare/double flare 3/16, 1/4, 5/16, 3/8 and 1/2".
metric bubble flare 4. 75, 6, 8, and 10mm.
GM transmission cooling line 3/8" and 1/2".
mini tube cutter for 1/8" to 5/8" (3 - 16 mm) O. D. tubing (1/8 to 1/2" nominal) all packaged in a custom blow molded case.

Set includes the Upgraded Hydra-Flare Yoke & Pump Assembly.
45 & Double Flaring Adapters and Die Sets.
Hydra-Flare Yoke & Pump Assembly has been modified with a tube & die set stabilizing arm for easy form tube forming.
Magnetic Adapter holder to keep adapters in place.
Equipped with an Enlarged Die Set Compression Area for better grip of dies.

Dimple Die for 1-1/4” Actual Hole Size.
Rated For 3/16" Mild Steel. Recommended Minimum Forming Tonnage: 13..
This dimple die set creates flared holes. Cut out holes inherently provide reduced weight of the work piece, and these dimple dies create rigidity by flaring the holes..
Die Material: Punch Grade Hardened Tool Steel, Black Oxide Finish..
Recommended Compression Tool: TEMCo Industrial TH0037 Knockout Punch Set or any other electricians knockout punch set..