Reviews Pin lug Hose Shank

Abbott Rubber X1240-KIT-3000-1147-CN Water Pump Hose Kit, Includes 3-Inch Suction and Discharge Hose

  • 20 Ft. Green PVC Suction Hose with Female Quick-Connect x NPT threaded male.
  • 50 Ft. Lay-Flat Blue PVC Discharge Hose with Aluminum/Brass threaded couplings.
  • Spanner wrench included for tightening pin-lug couplings.
  • Quick -Coupling adapter included for attaching suction hose to pump.
Check Stock

McGard 21156 Chrome Regular Shank Wheel Locks (M12 x 1.5 Thread Size) - Set of 4

  • Regular Shank Wheel Locks for custom replacement aluminum wheels that are between 11/16″ and 7/8″ thick at the wheels stud hole and use flat seat lug nuts. Sets contain polished stainless steel washers. *Note: Regular .580″ Shank Locks match Regular .746 Shank Lug nuts, and visa versa..
  • McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust. Every lock is through-hardened and tempered. Manufactured in the USA to meet or exceed OEM standards..
  • Note the type of seating your wheel locks and lug nuts require they can be either radius, flat or cone seat this has to be done visually by the customer to insure a proper fit before purchase and install along with correct shank length and thread size that matches your current lug nuts.
  • Due to the unique key patterns, the pattern shown in images will differ from the pattern on the locks you receive. If order....
Check Stock

DPAccessories LCE3L6HESBK04024 24 Black 12x1.5 Closed End ET Spline Tuner Lug Nuts for Aftermarket Wheels

  • Extended Thread (ET) lug nuts are designed to help center lug-centric aftermarket wheels on the vehicle's wheel studs. Our ET lug nuts fit most lug-centric aftermarket wheels with a 16mm diameter lug hole and a conical lug nut seat..
  • ET lug nuts are NOT compatible with factory original OEM wheels. ET lug nuts do NOT provide additional thread engagement on your wheel studs. Applications that need more thread engagement may require extended length wheel studs to be installed..
  • SPECS: M12x1.50 thread - Closed End ET Spline Tuner Style Lug Nuts - Conical 60 Degree Seat - 39.88mm long - 20.07mm wide - 7.62mm shank length - 15.75mm shank width.
  • REQUIRES: 19mm and 13/16 in. (21mm) hex spline tool/key part #D5210K for installation and removal. One (1) tool included. Wheels are required to be lug-centric with a 16mm diameter lug hole..
  • INCLUDES: 24 Black Closed End ET Spline Tuner Lug Nuts and one (1) spline tool/key for installation. Shipped in our signature premium packaging..
Check Stock

Destroyer Plastics One Year Manufacture Warranty Above/In Ground Manual Swimming Pool Vacuum Hose with Swivel Cuff (Residential Blue 1.25 in, 18)

  • HIGH QUAITY:This swimming pool backwash hose made of PVC material, the material is resistant to abrasions and corrosion,reinforced with internal polyester yarn to prevent leaks and tears for durable use..
  • WIDELY APPLICATIONS :Essential pool supplies as household drain hose, sump pump discharge hose, trash pump discharge hose, pool drain hose and architectural engineering..
  • HUGE WATER OUTPUT:The heavy-duty pool hose huge water output and high water pressure can easily handle daily backwash and discharge, can help and maintain your pool water clean all season..
  • STANDARD SIZE:This backwash hose Length: 50 feet.
  • Fit 1-1/2inch pvc pine which.It can install to standard camlock/pin lug fittings, or directly install to pvc pipe.Ideal for output a large amount of water you need..
  • EASY TO INSTALL:Each hose comes with two new stainless steel hose clamp to hold it in place ,collapses flat and is easily rolled back up, it takes hardly any space and after using, please store in a dry place out of direct sunlight for storage..
Check Stock

Gonioa 2 inches x 100 FT Heavy-Duty PVC Swimming Pool Backwash Hose, Reinforced Discharge Hose with Clamp for Swimming Pools, Blue

  • HIGH QUAITY:This swimming pool backwash hose made of PVC material, the material is resistant to abrasions and corrosion,reinforced with internal polyester yarn to prevent leaks and tears for durable use..
  • WIDELY APPLICATIONS :Essential pool supplies as household drain hose, sump pump discharge hose, trash pump discharge hose, pool drain hose and architectural engineering..
  • HUGE WATER OUTPUT:The heavy-duty pool hose huge water output and high water pressure can easily handle daily backwash and discharge, can help and maintain your pool water clean all season..
  • STANDARD SIZE:This backwash hose Length: 100 feet.
  • Fit 1-1/2inch pvc pine which.It can install to standard camlock/pin lug fittings, or directly install to pvc pipe.Ideal for output a large amount of water you need..
  • EASY TO INSTALL:Each hose comes with two new stainless steel hose clamp to hold it in place ,collapses flat and is easily rolled back up, it takes hardly any space and after using, please store in a dry place out of direct sunlight for storage..
Check Stock

Gonioa 2Inch x 25-Feet Heavy-Duty PVC Swimming Pool Backwash Hose,Reinforced Discharge Hose with Clamp for Swimming Pools,Blue

  • HIGH QUAITY:This swimming pool backwash hose made of PVC material, the material is resistant to abrasions and corrosion,reinforced with internal polyester yarn to prevent leaks and tears for durable use..
  • WIDELY APPLICATIONS :Essential pool supplies as household drain hose, sump pump discharge hose, trash pump discharge hose, pool drain hose and architectural engineering..
  • HUGE WATER OUTPUT:The heavy-duty pool hose huge water output and high water pressure can easily handle daily backwash and discharge, can help and maintain your pool water clean all season..
  • STANDARD SIZE:This backwash hose Length: 25 feet.
  • Fit 1-1/2inch pvc pine which.It can install to standard camlock/pin lug fittings, or directly install to pvc pipe.Ideal for output a large amount of water you need..
  • EASY TO INSTALL:Each hose comes with two new stainless steel hose clamp to hold it in place ,collapses flat and is easily rolled back up, it takes hardly any space and after using, please store in a dry place out of direct sunlight for storage..
Check Stock

Universal Socket, Self-adjusting Socket Fits Standard 1/4'' - 3/4'' Metric 7mm-19mm, Adapter Socket for Wrench Ratchet & Power Drill, Tools Gifts for Men Him Husband Dad Father DIY Handyman Women

  • FREE SHIPPING - Fits pentagon nuts up to 1-1/2″ (point to flat) and square nuts up to 1-1/4″ (flat to flat)..
  • Grips and retains both pentagon and square operating nuts..
  • Works on pin-type hose couplings or hydrant adapters..
  • Spanner fits both lug-type and pin-type hose couplings..
  • Entire wrench is zinc-chromate plated for corrosion resistance..
  • Trumbull #377-5960 Adjustable Hydrant Wrench is very high quality.
Check Stock

D-WEIXIN 2' × 50' Pool Backwash Hose, Heavy Duty Reinforced Blue PVC Lay Flat Water Discharge Hoses for Drain Pools and Clean Filters

  • The pool backwash hose is made of PVC and reinforced with polyester yarn, can withstand 90 psi working pressure during water supply and drainage, heavy-duty, superior strength, economical, durable, leak-free and weather, chemical and burst resistant..
  • Backwash hose is standard 2 inch hose, flat 3.4’’ wide, fit 2’’ standard size filter outlet or cam lock / pin lug fittings, and fit 1.5’’ or less size schedule 40/80 PVC pipe. Be sure to measure your filter outlet to ensure proper fit before ordering..
  • The discharge hose is essential swimming pool supplies, works as pool drain hose, pool pump hose, filter waste hose, also works for agricultural water discharge, irrigation, landscaping, construction dewatering and submersible pumping..
  • The pool hose is made to fit standard connections to backwash pool filtration systems , and you can easily install it with clamp. After use, just roll it up and hardly take up any space, and then store it in a dry place for next use, away from direct sunlight..
  • Unlike traditional paper-thin single layer hose, it can be used multiple times and withstand rough handling. If you want a drain hose that will last, this is what you are looking for!.
Check Stock

1.5' x 50' Blue PVC Backwash Hose for Swimming Pools, Heavy Duty Discharge Hose Reinforced Pool Drain Hose with Aluminum Pin Lug Fittings

  • Pool Supplies - Discharge hoses for swimming pools with durable pvc water hose and heavy duty connectors resist to oils, grease, acids, and many chemicals. Essential pool supplies as sump pump discharge hose, trash pump discharge hose, pool drain hose..
  • High Quality - Discharge hose is made of flexible PVC material reinforced with a continuous high tensile strength polyester yarn circularly woven to prevent leaks and tears for durable use. Heavy duty connectors (aluminum Pin Lug fittings) prevent oxidation and rust..
  • Standard Pump Hose - Hose Length: 50 feet.
  • Temperature Range : 23°F to 149°F (-5°C to 65°C).
  • Scope of use: In-ground and above-ground pool equipment.(note: hose measures about 2.36 inch width when folding lay-flat).
  • Easy to Storage - Water discharge hose is fitted with the connector, which can be easy to directly connect to the pump, and after using, easily flat rolled up and store in a dry place out of direct sunlight for storage..
  • 100% Customer Service - Our aim is to provide consumers with high grade and more practical pool hoses. Any questions about the product, please CONTACT US. We will reply you within 24 Hours and solve your problems until you’re satisfied..
Check Stock

Puri Tech 6 Pack Universal Pool Cleaner Suction Hose 48 Inches Long White Color for Kreepy Krauly, Baracuda G3/G4, Navigator, & More 4 Feet Long

  • Pool Supplies - Flat discharge hoses for swimming pools with durable pvc water hose and heavy duty connectors resist to oils, grease, acids, and many chemicals. Essential pool supplies as sump pump discharge hose, trash pump discharge hose, pool drain hose..
  • High Quality - Discharge hose is made of flexible PVC material reinforced with a continuous high tensile strength polyester yarn circularly woven to prevent leaks and tears for durable use. Heavy duty connectors (aluminum Pin Lug fittings) prevent oxidation and rust..
  • Standard Pump Hose - Hose Length: 50 feet.
  • Temperature Range : 23°F to 149°F (-5°C to 65°C).
  • Scope of use: In-ground and above-ground pool equipment.(note: hose measures about 3.15 inch width when folding lay-flat).
  • Easy to Storage - Water discharge hose is fitted with the connector, which can be easy to directly connect to the pump, and after using, easily flat rolled up and store in a dry place out of direct sunlight for storage..
  • Excellent Customer Service - Our aim is to provide consumers with high grade and more practical pool hoses. Any questions about the product, please CONTACT US. We will reply you within 24 Hours and solve your problems until you’re satisfied..
Check Stock