Reviews Pin Plate

Cruiser Accessories 81500 Locking Fasteners License Plate Frame Hardware, Ultimate Kit-Stainless Star Pin

  • Our Ultimate Kit is a one stop shop of the best license plate frame hardware on the market, especially if you are unsure if your license plate requires standard or metric hardware.Fit Type: Universal Fit.
  • This hardware kit includes both standard and metric size locking stainless Star Pin fasteners and Rattle Stop hardware to provide everything needed to deter your license plate frame from being stolen and take the 'rattle' out of your license plate.
  • Designed to fit all novelty/license plates for domestic or import vehicles.
  • Includes four (4) Rattle Stop fasteners, four (4) 1/4 x 3/4 inch fasteners, four (4) M6 x 20mm fasteners, four (4) M5 x 20 mm fasteners, eight (8) plastic washers, four (4) lock nuts, four (4) plastic nut grommets and one (1) special Star Pin key for installation.
  • User friendly and easy to install, see back of package for installation instructions.
  • The combination of the pin in the center with the special Star Pin key makes it impossible to remove the screws with a typical allen wrench.
  • These fasteners are made of stainless steel.
  • Designed to fit all standard novelty/license plates.
  • Easy to install (illustrations on back of package).
Check Stock

The Warhol Incident (Alexis Parker Book 2)

  • Package Included:Plastic Case + Feet + Stabilizers + GK64x Hotswap Type C PCB + Plate + Cable + Removal Tool + Space Module.
  • Pls note:GK64x is wired kit.The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place.If some keys not working after plugging,please check whether your switch pin is bent or not.Make sure plug in 90 degree above plate.
  • This kit support 6.25u space and split double space.This plate is screwed to case directly.So if you want to replace normal GH60 case,you need to replace a non -replacable GH60 size plate is ok..
  • PCB has RGB presoldered,it's under per switch.This kit need to use Cherry MX switches and clones,optical switches is not supported.
  • There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again.3 pin 5 pin both are ok.
Check Stock

O'SKOOL 6-1/2\ Router Acrylic Universal Base Plate Fits Router Porter-Cable, Ryobi, Bosch, Makita, Hitachi, Dewalt

  • Adds visibility by being clear acrylic,quick and easy to mount..
  • Diameter : 6-1/2-Inch.with centering pin and assorted screw sizes to accommodate template guide variations..
  • Prepare your router and the existing base plate and any related hardware. In the fastener package provided, locate the machine screws that match the threads in your router..
  • On the chart on this page,find the model of your router and the corresponding letter that represents the mounting hole pattern on the base plate drawing.Locate the hole pattern on the base plate and mark with wax crayon or felt tip marker..
  • Ensure your router has a 1/4" collet installed and place the universal base onto the router lining up the marked mounting holes.Install the choosen machine screws but do not tighten. Insert the enclosed alignment pin into the 1/4" collet until it almost contacts the guide bushing. Tighten the collet lightly onto the pin. Carefully adjust the router depth so the pin makes contact with the alignment pin.Tighten the machine screws.Note:if the machine screws supplied bottom into the router mounting.
Check Stock

Yes4All Wall Mounted Weight Plate Holder - Fit 2inch Olympic Weight Plates Protective Rubber Pad Single

  • HEAVY GAUGE STEEL CONSTRUCTION: Made of solid stainless steel, Yes4All Wall Mounted Weight Plate Holders can support up to 550lbs of weight per pair and will last for a long time, ensuring your weight plates are safely stored off the floor.
  • SPACE-SAVING WALL MOUNT DESIGN: Our wall mounted weight plate holder is a cost-effective, space-efficient alternative for the bulky weight plate trees and racks. Comes with all mounting hardware for your comfort.
  • ANGLED LOADING PIN: The loading pin forms a slight incline angle with the wall when mounted, making use of gravity for safer board storage and extra durability. It is at 9” long and 1.9” in diameter, perfect for 2” Olympic weight plates.
  • PROTECTIVE RUBBER PAD: Also included is a rubber padding at the end of the loading pin to protect the stored weight plates from scratches and unnecessary damage as you slide them into the pin.
Check Stock

YMDK GK61x GK61xs GK64x GK64xs Anodized Aluminum CNC Case (Only Aluminum Case)

  • Package Included: CNC Case + Rubber Feet + Screws.
  • New GK61x GK61xs GK64x GK64xs plate and PCB can install in directly..
  • Old GK61 GK64 plate can't use since the size is bigger than normal 60 case.You can just replace a GH60 size customized plate is ok.The plate need to be compatible with GK61 PCB..
  • How to judge old and new edition: Old GK61 GK64 PCB is white and only support single 6.25u space New GK61x GK61xs GK64x GK64xs PCB is black and can support split space and single space at the same time..
  • There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again.3 pin 5 pin both are ok.If little keys not working,check the switch pin whether it's bent at first.Especially Kailh switches.
Check Stock

Wall Mounted Weight Plate Holder – Fits 2” Olympic Weight Plate, Hardware Included Weight Plate Storage (Black)

  • 【HEAVY GAUGE STEEL CONSTRUCTION】: WNOEY Wall Mounted Weight Plate made of premium stainless, Holders can support up to 550lbs of weight per pair.Long service life, inclined design can ensure that your weight plate is stored safely.
  • 【SLIGHTLY INCLINED ANGLE DESIGN】 : To prevents weight plates from falling. our loading pin forms a slight incline angle with the wall, making use of gravity for safer storage and extra durability..
  • 【SPACE-SAVING WALL MOUNT DESIGN】 : Our wall mounted weight plate holder is space-efficient perfect alternative. Comes with all mounting hardware(4*expansion screws. 2 rubber pads), Great for keeping your home gym clean and organized, easy to install..
  • 【PROTECTIVE RUBBER PAD】: Also included is a rubber padding at the end of the loading pin to protect the stored weight plates from scratches and unnecessary damage as you slide them into the pin.
  • 【YOU WILL GET 】:a pair weight plate holder with 4*expansion screws and 2 rubber pads, It is at 9” long and 1.9” in diameter, perfect for 2” Olympic weight plates.
Check Stock

Yes4All Wall Mounted Weight Plate Holder – 2-inch Olympic Weight Plate Storage, Sold in Pairs

  • HEAVY GAUGE STEEL CONSTRUCTION: Made of solid stainless steel, Yes4All Wall Mounted Weight Plate Holders can support up to 550lbs of weight per pair and will last for a long time, ensuring your weight plates are safely stored off the floor.
  • SPACE-SAVING WALL MOUNT DESIGN: Our wall mounted weight plate holder is a cost-effective, space-efficient alternative for the bulky weight plate trees and racks. Comes with all mounting hardware for your comfort.
  • ANGLED LOADING PIN: The loading pin forms a slight incline angle with the wall when mounted, making use of gravity for safer board storage and extra durability. It is at 9” long and 1.9” in diameter, perfect for 2” Olympic weight plates.
  • PROTECTIVE RUBBER PAD: Also included is a rubber padding at the end of the loading pin to protect the stored weight plates from scratches and unnecessary damage as you slide them into the pin.
  • 1-YEAR WARR AND 60-DAY RETURN: We offer a 1-year workmanship warranty and 60-day satisfaction warranty that ensure you have the best experience possible with our product.
Check Stock

Skyloong 64 GK64 GK64x RGB Hot Swap Programmable Wired Case PCB Plate Cherry MX Keyboard DIY kit Replacable Space

  • Package Included:Plastic Case + Feet + Stabilizers + GK64x Hotswap Type C PCB + Plate + Cable + Removal Tool + Space Module.
  • Pls note:GK64x is wired kit.The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place.If some keys not working after plugging,please check whether your switch pin is bent or not.Make sure plug in 90 degree above plate.
  • This kit support 6.25u space and split double space.This plate is screwed to case directly.So if you want to replace normal GH60 case,you need to replace a non -replacable GH60 size plate is ok..
  • PCB has RGB presoldered,it's under per switch.This kit need to use Cherry MX switches and clones,optical switches is not supported.
  • There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again.3 pin 5 pin both are ok.
Check Stock

ROHN BPC25G Concrete Base Plate for 25G Tower

  • ROHN 25G CONCRETE BASE PLATE. ROHN PART NUMBER: BPC25G.
  • 15" SQUARE PLATE - 3/16" THICK. GALVANIZED.
  • FOR USE WITH 3/4X12PP PIER PIN EMBEDDED IN CONCRETE - PIN NOT INCLUDED.
  • FOR GUYED AND BRACKETED INSTALLATIONS ONLY.
Check Stock

Wild Wings Winter Cabin Mini Collector Plates by Terry Redlin

  • Shows the California 2015 futuristic License Plate from Doc Brown's DeLorean Time Machine..
Check Stock