Reviews Pin Light Connector

Genuine Dell Optiplex 980 Small Form Factor (SFF) System Motherboard Mainboard Systemboard, Compatible Part Number: C522T

  • Chipset: Intel Q57 Express chipset, Supported Processors: Quad-Core - Intel Core i7 series, Intel Core i5 series, Dual-Core - Intel Core i3 series, Intel Pentium, Socket Type - LGA1156.
  • Supported Memory: Type - DDR3 SDRAM (non-ECC memory only), Speed 1066 MHz or 1333 MHz, Connectors - four, Capacity - 1 GB, 2 GB, or 4 GB, Minimum memory - 1 GB, Maximum memory - 16 GB, Audio: integrated.
  • Video: Integrated Intel graphics media accelerator HD, Peripheral Interfaces: Back panel -two connectors for line-in/ microphone and line-out, Front panel - two front-panel connectors for headphones and microphone, eSATA - one 7-pin connector, Network -one RJ45 connector, Parallel -one 25-pin connector (bidirectional), Serial -one 9-pin connector.
  • 16550C-compatible, USB - Front panel - two connectors, USB - Back panel -six connectors, Video - one 15-hole VGA connector one 20-pin DisplayPort connector.
  • System Board Connections: one 120-pin connector PCI Express x16 data width (maximum), one 164-pin connector Express Lane, Serial ATA - three 7-pin connectors, Memory - four 240-pin connectors, Internal USB - one 10-pin connector (supports two USB ports), Processor fan - one 5-pin connector, Front I/O - one 26-pin connector, Front panel control - one 14-pin connector, Proces....
Check Stock

Optimal Shop 20+4 Pin LCD Computer Power Supply Tester for SATA IDE HDD ATX ITX BYI Connectors-Black

  • 8-in-1 ATX power supply tester: Support testing 20-pin IDE/24-pin IDE/HDD/floppy disk 4-pin/PCI-e 6-pin/4-pin/8-pin/SATA connector..
  • Aluminum alloy shell: light and easy to carry, high strength, good thermal conductivity and corrosion resistance..
  • 1.8″ LCD screen: The output voltage is displayed on the 1.8″ LCD screen, which is easy to read (1.8″ LCD screen is powered by the 20-pin/24-pin connector). Note: Is there a scratch on the product screen? Because the screen is easy to scratch, we put a protective film on it, if you think it is not beautiful, you can tear it off by yourself..
  • Buzzer alarm: When your power supply PG number fails, the power tester will emit a buzzer alarm, which is easy to know..
  • When testing with HDD/floppy disk 4-pin/PCI-e 6-pin/4-pin/8-pin/SATA connector, the indicator on the left shows the output voltage (+12V + 3.3V + 5V)..
Check Stock

Cooler Master ARGB LED Controller with 4 x 3-Pin Ports - Multiple Colour Effects, Thermal Detection Mode, 4-Pin RGB Device Compatible

  • VERSATILE SYSTEM HUB - Can connect to either 4-Pin RGB or 3-Pin ARGB compatible motherboards (ASUS Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light or ASRock Polychrome) or function as an independent controller instead..
  • SPECTACULAR LIGHTING EFFECTS - Features include interchangeable RGB/ARGB lighting control, multiple LED modes, as well as colour and speed adjustments..
  • BROAD COMPATIBILITY - The Cooler Master ARGB Controller includes a fan-signal wire, case-restart wire, motherboard restart wired, 4-Pin RGB connector, 4-Pin motherboard connector, USB header connector, USB adapter, ARGB 3-Pin motherboard connector, thermal detection wire, and 4 ARGB 3-pin connectors.
  • THERMAL DETECTION FUNCTION - When connected via the thermal detection cable, real-time temperatures can be monitored and displayed through colour lighting effects..
  • IN-FRAME MAGNETS - The slim case can be attached to any metallic surface..
Check Stock

5050 4 Pin RGB LED Strip Connector Kit Includes RGB Extension Cable, LED Strip Jumper, 2 Way RGB Splitter Cable, L Connectors, T Connector, Gapless Connectors, 4 Pin Male Connector, LED Strip Clips

  • LED strip connector kit: the package includes 5 pieces female connector wire cables, 5 pieces LED connector cables, 10 piece fixing clips, 10 pieces screws, 10 pieces black male to male connectors, 10 pieces white male to male connectors, extension cable in 3.3 feet and 6.6 feet, 1 piece of 2 way splitter, 20 pieces solderless gapless connectors, 4 pieces L-shaped connectors and 4 pieces T-shaped connectors, which can meet your DIY need.
  • Compatible with: the LED connector kit fits the 0.39 inches/ 10 mm SMD 5050 RGB LED strips, compatible with waterproof and non-waterproof strips.
  • For waterproof LED strips, please strip off the silicon on the surface around the welding area.
  • Enjoy the fun of light strip: with these various LED connector adapters, you can easily set up your LED light bar and customize it.
  • Use a solderless 4-pin connector to connect a separate light strip, or use a corner connector to connect the corner of the house and table, the wall or the ceiling, etc..
  • Easy to install: 5050 4 pin RGB LED light bar connector kit can be plugged and played, easy to install, no tools and soldering are required.
  • Widely applied: light strip connector can be applied for the connection between 2 light strips, the connection between the light strip and the con....
Check Stock

Dell - Dell Dimension E521 305W Power Supp

  • 375 W Max Output | 100-120V or 200-240V Input.
  • Compatible Systems: For Dimension 9100, 9150, For Precision Workstations 380, 390, For XPS 400, Upgrade for Dimension 5100, E510, 5150, E520, E521, E310, 3100.
  • Compatible Part Numbers: P8401, K8956, WM283, UP173 | Model Numbers: L375P-00, N375P-00, PNL375P, PS-6371-1DF-LF.
  • Connectors: P1 - 24-pin ATX Motherboard Power, P2 - 4-pin ATX Power connector, P3 - 4-pin SATA standard power connector, P4 - 6-pin Dell proprietary connector, P5 - 4-pin SATA standard power connector, P7 - 4-pin Floppy connector, P8 - 4-pin Molex power connector, P9 - 4-pin Molex power connector, P10 - 4-pin Molex power connector, P11 - 4-pin Molex power connector, P12 - 6-pin PCI-E power connector.
Check Stock

50 Pack Solderless LED Tape Light Connector Screw Down Terminal Block Connector 2 Pin Led Connectors for Strip Lights 8 mm Tape to Wire for 5v 12v 24v Single Color LED Strip Lights, White

  • Connect LED Tape and Wire: the 2 pin LED connector adopts a screw down fix design, allowing you to fix your light tape with wire firmly easily, solderless and easy to operate, saving your time and effort.
  • Strong Compatibility: compatible with various sizes of linear, the LED adapter for strip lights is suitable for 22AWG, 20AWG, 18AWG, 16AWG solid wire, stranded wire and fuse wire, allows you to choose a more suitable customized solution, no worry about improper wiring.
  • Support High Current: these 8mm LED strip light connectors support up to 6A current and are compatible with 5V, 12V, 24V 2 pin LED strip, so that you can connect a longer LED strip through an LED connector.
  • How to Operate: these 2 pin connectors for LED tape are suitable for 2 pin 8mm IP65 LED waterproof light strip and non waterproof light strip, COB light strip and so on, if you want to connect your LED tape to the wire, just strip the silicone cover on the welding line area off the surface of the tape lamp, then insert the tape into the connector and tighten the screws.
  • Sufficient Quantity to Meet Your Needs: the package contains 50 pieces of 2 pin LED light strip connectors in total, come with mini size, compact and practical, sufficient to meet your various using needs on different o....
Check Stock

Led Strip Lights 44-Key IR Remote Control+ Controller Suitable for RGB 5050 Led Strip

  • Suit for 4-Pin Led Strips: Suit for 4-Pin Led Strips: Compatible with all kinds of 4 Pin 0.39 inch(10mm) wide 5V/12V/24V 3528/5050 SMD RGB....
  • Solderless Connectors: 10Packs Gapless solderless connectors with 3packs L shape connectors. Strips to strips gapless connector for terminal....
  • Easy Installation: Align the positive polarities”+” of the led light strips with each other, no need to match the positive polarity on the....
  • Fireproof Connector: Use the PBT premium material, heat resistance, fireproof, high quality without fire hazards, secure the electrical safety..
  • Package Content: 10×Gapless Solderless Connector, 3×L Shape Connector..
Check Stock

DR.LILIANG 4-Pin RGB LED Light Strip Connectors Kit, LED Strip Connector Adapter for 5050 10mm, Gapless Led Light Connectors for SMD Multicolor LED Strip, Solderless 4Pin LED Light Strip Accessories

  • Worry-Free Service --- If the LED strip connector you received happens to be malfunctioning, let us know then we will provide you a free replacement or refund as soon as possible. We are committed to providing customers with high-quality LED strip connectors kits..
  • Fits All 10 mm 4pin Light Strips --- Compatible with any 4-pin 10mm (0.39in) wide 5050 RGB multicolor LED flexible strip lights, whether it is a waterproof one or non-waterproof lights. This led connector kit can be used between the led strip and the strip, between the strip and the controller, and between the strip and the splitter..
  • You Will Get 95 Accessories--- 1x User Manual, 8x LED Strip Jumpers, 10x Gapless Led Connectors,12x L Shape Connectors, 2x T Shape Connectors, 1x 2-way splitter cable, 2X 4 Pin female connectors with bare wire terminal, 20x 4 Pin Male to Male Connector, 40x LED Strip Clips (for waterproof and waterproof led light strip)..
  • Solderless & Easy To Use --- Just open the wire clip of the connector, slide the light strip under the connector's pins and snap down the clip. It will create a quick shunt, solid connection without the hassles of soldering. We also include an extra paper and online user manual with pictures and texts for your reference!.
Check Stock

5 Pin RGBW Led Connector Extension Wire with 5 Pin Conenctor, SIM&NAT 15 cm / 5.9 inch RGBW RGBWW Connector Plug Weld Line Male Female Plug Cable for SMD 5050 Led Strip

  • 5 Pin RGBW RGBWW female connector Plug Cord with bare wire terminal, ideal for soldering.
  • Length of RGBW extension Cable: 5.9 inch / 15cm.
  • RGBW / RGBWW Extension Cable for 5050 SMD RGB Warm White led strip light.
  • Can be welded to RGBW / RGBWW led strip light..
  • Package content: 10* 5 pin Female Connector Cord, 10* 5 Pin male Plug Connector.
Check Stock

Genuine Dell M1J3H 525w Watt Power Supply PSU for Precision T3400 Systems Compatible Part Numbers: M1J3H, 7JVXX, D525AF-01

  • Genuine Dell M1J3H 525w Watt Power Supply PSU For Precision T3400 Systems.
  • Connectors: P1 - 24-pin ATX Motherboard Power, P2 - 8-pin Motherboard Power Connector, P3 - 4-pin SATA Standard Power Connector, P4 - 4-pin SATA Standard Power Connector, P5 - 4-pin SATA Standard Power Connector, P6 - 4-pin SATA Standard Power Connector, P7 - 4-pin SATA Standard Power Connector, P8 - 6-pin Video Power Connector, P9 - 6-pin Video Power Connector, P10 - 2-pin Adapter Power Connector, P11 - 4-pin Floppy Power Connector.
  • Compatible Part Numbers:M1J3H, 7JVXX, D525AF-01.
Check Stock