Reviews Pillow Stock Bearing

Pillow Block Bearing, Bearing Steel hickened Mounted Self Aligning Rhombic Bearing3/4 inch 2 Bolt Pillow Block Flange Bearing, Self-Alignment, (2 Pack -UCFL204-12)

  • Cast iron UCFL204-12 flange block housing increases life of the bearing.
  • pillow block bearing 3/4 UC204-12 chrome steel bearing for efficient operations at a wide range of speeds.
  • pillow block bearing 3/4 inch shaft Dynamic (radial) load rating of 12.8 kN and static (axial) load rating of 6.65 kN.
  • pillow block bearing Set screw prevents shaft slippage.
  • Dimensions: Item: UCFL204-12 Bearing Type: Mounted Bearings Bolt Size: M10 Basic Load (Cr): 12.8 KN Basic Load (Cor): 6.65 KN Bearing No: UC204-12 Bore: 3/4" Bolt hole to bolt hole: 3.543 in. (90mm) Overall length: 4.448 in. (113mm) Overall thickness: 1.312 in. (33.12mm) Bolt hole: 452 in. (11.5mm) Temp. Range: -40 Degrees to 250 Degrees F.
Check Stock

NEW RAM HYDRAULIC THROWOUT BEARING FOR STOCK CLUTCHES,WITH LINE,FITTINGS, AND SHIMS

  • Brand New Ram Hydraulic Throwout Bearing for Stock Style Clutches (Ram Part #78125)..
  • Works with Saginaw, Muncie, GM T-10, & Jerico transmissions, as well as any transmission that has a bearing retainer collar with an outside diameter of 1.375" or less, as the inside diameter of this throwout bearing is 1.380"..
  • Will not fit T-5 or non-GM T-10 transmissions * Fits stock style clutches * Snap ring on collar keeps the bearing from blowing apart if over-extended.
  • Includes a set of conical shims to properly fit the bearing..
  • Also includes 2 different installation studs, one 5/16"-18 and one 3/8"-16..
Check Stock

SUCSFL 204-12 Stainless Steel Flange Bearing Unit 3/4\ Bore with Set Screw Suitable for Engines & Pump Paper Mill Off-Shore

  • The bearing comes with a stainless steel Pillow Block bearing with a set screw.
  • Solid Base /Self Aligning pillow Block Bearings.
  • Bearing Material: It is made up of premium quality 440C Stainless Steel.
  • Bearing LubricationFDA/USDA-H1 Solid Grease.
Check Stock

Mergorun 500mm Horizontal Optical Axis & Flexible Shaft Coupling & 8mm Lead Screw Dual Rail Shaft Support Pillow Block Bearings pack of 15

  • Bearing Pillow Block have a certain bearing capacity, can hold in ordinary precision rack, strong adaptability..
  • Lead Screw are widely used for machine tools, like 3D printing..
  • Shaft Optical Axis suitable for kinds of electronic equipment/guide bar, drive shaft, pillar..
  • This set includes Optical Axis & Lead Screw, Pillow Block Bearing, Linear Rail Support, CNC Stepper Coupler and Ball Bearing..
Check Stock

Mergorun 200mm Horizontal Optical Axis & 8mm Lead Screw Dual Rail Shaft Support Pillow Block Bearings & Flexible Shaft Coupling for digital coordinate measuring equipment Set of 15

  • Shaft Optical Axis suitable for kinds of electronic equipment/guide bar, drive shaft, pillar..
  • Lead Screw are widely used for machine tools, like 3D printing..
  • Bearing Pillow Block have a certain bearing capacity, can hold in ordinary precision rack, strong adaptability..
  • This set includes Optical Axis & Lead Screw, Pillow Block Bearing, Linear Rail Support, CNC Stepper Coupler and Ball Bearing..
Check Stock

NEW RAM HYDRAULIC THROWOUT BEARING FOR CHRYSLER TREMEC TRANSMISSIONS & STOCK

  • Brand New Ram Hydraulic Throwout Bearing Kit for Stock Style Clutches with Chrysler Tremec Transmissions (Ram Part #78134)..
  • Works with Chrysler Tremec Transmissions with a 1"-23 spline..
  • Includes a replacement transmission collar to install on your Tremec..
  • Also, includes a set of conical shims to properly fit the bearing, installation stud, inlet, outlet, and conversion fittings, as well as a remote bleeder line..
Check Stock

Michigan Motorsports LS1 Rocker Arms and Bolts with Trunion Kit Installed FITS LS2 LS6 LQ4 LQ9 LM7 4.8 5.3 5.7 6.0

  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor..
  • We utilize LS rocker arms and install new LS1 rocker arm retro-fit trunion kit that replaces the cageless, loose OEM needle bearings and powdered metal trunion with a premium 8620 steel alloy trunion and caged roller bearings for added durability. The caged roller bearings that greatly reduce the possibility of the bearing failure experienced with stock LS1 needle bearings, which can send loose needles throughout the engine upon failure..
  • LS1 style allen head bolts are included for installation. Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor.
  • This kit includes: 16 LS Series Rocker Arms 16 rocker arm trunnions- LS-type retrofit 32 rocker arm bearin....
Check Stock

NEW RAM HYDRAULIC THROWOUT BEARING FOR FORD TREMEC TRANSMISSIONS,TKO 500,600

  • Brand New Ram Hydraulic Throwout Bearing Kit for Stock Style Clutches with Ford Tremec Transmissions (Ram Part #78132)..
  • Works with Ford Tremec Transmissions, including TKO 500 and TKO 600.
  • Includes a replacement transmission collar to install on your Tremec..
  • Also, includes a set of conical shims to properly fit the bearing, installation stud, inlet, outlet, and conversion fittings, as well as a remote bleeder line..
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit 4.8 5.3 5.7 6.0 LS1 LS2

  • LS Rocker Arms with Bronze Bushing Style Bearing Trunions Professionally Installed.
  • Included: 16 New LS Rocker Arms with Bushing Style Bearing Trunions Professionally Installed and 16 Alen Head Bolts..
  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets mo....
Check Stock

PGN - UCFL206-20 Pillow Block Flange Mounted Bearing 1-1/4\ Inch Bore (2 PCS)

  • ✅Package Content:4Pcs KFL08 Pillow Block Bearing Flanges..
  • ✅Dimension:Bore Size:8mm/0.31''.Mounting Hole Diameter: 5mm/0.2".Mounting Hole Distance: 37mm/1.46''.Bearing Inner Dia.: 8mm/0.31''.Total Size:48mmx25mmx12mm/1.88"x0.98"x 0.47"(L*W*H)..
  • ✅Made of high-quality zinc alloy with high strength, which is durable. The high-strength rolling body with better load carrying capacity is more abrasion-resistant. Polished by high precision CNC machine tool. It produces low noise and high speed. It is not easy to get hot so the use period is long..
  • ✅The bearing has a wide inner ring with two set screws for attaching to the shaft. Self-aligning. You can adjust or replace the bearing easily.The vertical surface of the bearing can be adjusted and changed. If you find that the product is not perpendicular to the installation plane, please adjust it manually..
  • ✅Widely used in various of machinery, power, mining, metallurgy, textile, agriculture and other industries, especially in food machine. The pillow block can also be used into conveyring systems, film processing machinery, spin machine and printing machine..
Check Stock