Reviews Photoelectric Switch Sensors

UGarden String Light Hanging Kit with 170ft Coated Stainless Steel 304 Tension Wire Rope, Outdoor Light Guide Wire kit, String Lights Suspension Kit

... internal ambient light level auto detection circuit that will automatically turn on at dusk and off at dawn depending on the ambient lighting level, saving you the trouble of having to remember to turn the lights on or off at a specific time.
Waterproof Automatic Light Switch: the waterproof cover can make our photoelectric switches not easy to corrode and protect it from dirt and dust, and help the switch work better in rain, wind, snow and other harsh environments.
Specifications: model NK-GT, 120VAC, 50/ 60HZ, applicable voltage range is 105-130V.
Model LP-403C, 120-277VAC, 50/ 60HZ, please check the specifications carefully before purchasing.
Wide Applications: these 120V photoelectric switches can be applied to control outdoor area lights, bollard lights, porch lights, patio lights, entrance lights, driveway and sidewalk lighting, street lighting, outdoor lighting, indoor lighting, sidewalk and landscape lighting.
Installation Method: model NK-GT electrical light switches can be easily installed on the precision focus lamp, just disconnect the power, put the screw wire of the switch into the hole on the outside of the lamp, then tighten the rubber washer and zinc alloy ring nut.

Wayne Dalton Wired Photoelectric Safety Sensors..
For Torsion iDrive™ models: 3651-372, 370-372..
For Quantum/Classicdrive™ models 3012, 3014, 3016, 3018, 3212, 3213, 3214, 3312, 3313, 3314, 3316, 3412, 3414, 3512, 3514..
For DoorMaster™ models: 3660-372, 3661-372, 3662-372, 3760-372, 3751-372..
Kit includes sensors with wire mounting brackets, fasteners, and installation instructions..

This is a collection of emission and reception in one photoelectric sensor..
Detection distance can be adjusted according to requirements..
The sensor has a detection range, interference by visible light small, easy to assemble, easy to use and so on..
Can be widely used in robot obstacle avoidance, assembly line and many other automated products..
Photoelectric sensor (photoelectric switch) NPN normally open..

...ff at dawn according to ambient lighting levels.
Adopted an internal design, the post eye light control has an automatic ambient light level detection circuit that automatically switches off during the day and on at night, saving you the trouble of having to remember to switch lights on or off at certain times.
Photoelectric design accessories: the package comes with 6 packs of black automatic light switches, made of quality material, which are stable, weatherproof and anti rust, you can use them with confidence for a long time, and can serve as small and rainproof street lights photoelectric switch.
A waterproof cover design: the photoelectric switch for outdoor lights is equipped with a waterproof cover to double protect the sensor lens, which can avoid dirt and dust, and help the switch to work better in hard environments, such as in rainy, windy, snowy days and more.
Nice compatibility: the mini button photo control inputted voltage is 120 to 227V, which will be compatible with various kinds of lamps fixtures like incandescent, fluorescent, CFL, LEDs.
The LEDs need to work with DC power, while other voltages are not suitable.
Suitable for indoor and outdoor places: the photo cell light sensor for outdoor lighting features time delay function, wh....

M12 PNP NO ATO Through-beam photoelectric sensor consists of a light projector and a light receiver.
Infrared photoelectric sensor can distinguish the opaque reflective object, with a detection range, easy to assemble and use, and less susceptible to interference, long life and so on.
Material: Housing:Nickel plated brass, Detection surface (lens): PMMA.
Package Content: 1 Pair x Photoelectric Switch.
【Customer First】If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.

For All types of Retro-Reflective and Polarized Retroreflective Photoelectric Sensors.

Special attention：If you are not clear about the product connection method, please refer to the wiring diagram of this product.If you receive a switch that is incompatible with your application or does not work properly, please contact us by email in time, and we will solve your problems for you..
Output Current: 2A； Detection distance: 3m； Response Time: 003c 30ms； Induction Frequency: 200HZ..
Weight: 185g.Special note: If this photoelectric switch is used to control the alarm system, please install it together with the relay. Otherwise, the switch will not work..
Modle: E3JK-R4M1； Relection Type: Specular Reflection； Supply Voltage: 12-240VDC 24-240VAC；Load Rating: 3A 250VAC.Indicator Light Color: Red； Current consumption: 15mA； Working temperature: -25-55 degrees..
Package Content: 1 x Photoelectric Switch, 1 x Reflector Panel, 1 x Mounting Bracket(with screws,nut).If you have a problem with the knob you received, please contact us by email in time..

...ease disconnect the power, then place the screw thread of the photocell sensor switch in the knockout hole and fasten it with a rubber gasket and zinc alloy lock-nut. Adjust the swivel base and point the outdoor photo cell sensor at the precise spot where you need it..
【ADJUSTABLE DESIGN & WATERPROOF】 - The photoelectric tube can be rotated 180° to achieve a beautiful light direction, and focused on the position you need. Heavy-duty body and IP65 Water-resistant protects the photocell sensor against weather elements such as rain and dust..
【RELIABLE QUALITY & SERVICE】 - Two year warranty available. ADUB 120-277V photoelectric switch sensor is UL certificate. Please feel free to contact us for a refund or replacement if you have any questions or quality problems. We will respond within 24 working hours..