Reviews Petrol Hose

Amarine Made 12V 60W Oil Change Pump Extractor, Oil/Diesel Fluid Pump Extractor Scavenge Oil Change Pump Transfer Suction Transfer Pump with Tubes Truck Rv Boat ATV (60W)

  • 【Specificaiton】: Input Voltage: DC 12V.
  • Motor Oil (40-60 degrees) Flow Rate: approx. 0.8-1.0L / min.
  • 【Easy Installation】: you just need to place the inlet and outlet hoses at the appropriate positions, connect the power clamps to the car battery and press the button. This process is very simple and you can often do it by yourself to ensure your engine runs smoothly..
  • 【 Ideal Equipment For 】: Extracting Motor Oil From Your Vehicle Without Mess & Specialised Tools Extract The Oil From Your Car, Motorcyle, Scooter, Quad Bike, Truck, Boat, Forklift, Generator, Tractor, Ride On Mower Etc Siphon & Transfer Diesel To Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc..
  • 【WARNING】: This product is NOT suitable for gasoline/petrol. Do not use this pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc).
Check Stock

Siphon Hand Pump Manual Fuel Transfer Pump Siphon Hose for Gas Gasoline Petrol Diesel Oil Liquid Water Fish Tank with Durable PVC Hoses,Portable Widely Use

  • 【High Quality】: The siphon bulb is made of rubber ,which starts siphoning liquid flow quickly.
  • Both ends are made of heavy aluminum and clamped on with solid metal springs.
  • 2 flexible duarable PVC transparent hose (1.2m+0.8m), provides easy reach into containers, petrol,high temperature and corrosion resistant..
  • 【Easy to Use】：This Lightweight and portable siphon hand fuel pump has an arrow to show the direction of the water, which is easy to use.Connecting the PVC Hoses,a few squeezes of the bulb will get the flow of water started, remove the squeeze bulb, and flow will continue,then insert end of tube into a container below the level of the source. 1 to 3.5 Gallons per minute depending on if you flow through the pump or use just the hose..
  • 【Hose Clip Secures】: There are metal buckles at the siphon pump connecting tip and hose, which can make the two more tightly connected. Includes one hose retainers clip to attach to a variety of containers to prevent potentially spilling any fluids and permit one hand operation – safety aid when moving fuel..
  • 【Multi-Use】： This manual pump is for air, gas, coolant, fue....
Check Stock

XtremeAmazing Replacemnt for 3/8' Fuel Injection Hose Clamps (Pack of 10) 9/16' - 5/8' Dia

  • Designed for use on 3/8" ID Fuel Injection Hose.
  • For Various Diesel Petrol Pipe, Home Use, Auto Repair, Marine, Plumbing,Industrial and so on..
  • Package Conents: 10* Fuel Injection Hose Clamps.
Check Stock

Siphon Pump for Gasoline Gas Oil Fuel Petrol Diesel Fluid Water Fish Tank,Manual Hand Pump 1 Transfer Pump with 2 Durable PVC Siphon Hoses (15mm) with Hose Clip,Metal Buckles,Brass 1

  • ... 【High Quality】: The siphon bulb is made of high quality rubber ,which is thick and durable.
  • Both end of the bulb is made of heavy aluminum and clamped on with solid metal springs.
  • Build-in Stop Valve prevent the backflow of the fluid.
  • 2 flexible,duarable and thick(2mm) PVC transparent hose (1.2m+0.8m) which is petrol,high temperature and corrosion resistant can be used for a long time..
  • 【Hose Clip Secures】: There are metal buckles at the siphon pump connecting tip and hose, which can make the two more tightly connected. Include one hose clip to secure the hose to variety of containers to prevent spilling and permit one hand-free operation. – safety aid when moving fuel.Coming with one brass with that you can expand the hose by insert the brass..
  • 【Multi-Use】： This manual pump is for air, gas, coolant, fuel , petrol , diesel ,gasoline , oil , water and other common liquids, also can be a water changer for fish tank at you home.Suitable for various vehicles without anti-theft filter net, and brush cutter, lawn Mower, snowblower, hedge trimmer, etc.Ideal for emergency pumping needs, drain sinks, pool covers, toilets, fountains,transfer or drain gas..
Check Stock

PLUMIA 12V 100W Oil Change Pump Extractor, Upgraded Oil/Diesel Fluid Pump Extractor Scavenge Suction Transfer Pump, Marine Electric Oil Pump, For Boat, Car, Motorcycle, ATV, RV, Truck, Motorbike

  • ...oves, 2*battery clips, 1*user's manual. Please pay attention to the direction of import and export, positive and negative poles and lock hose lock before use. The suction power of the micro suction pump is limited. Please do not connect other extension tubes..
  • 【WARNING】: This product is NOT suitable for gasoline/petrol. Do not use this pump to extract water, gearbox oil or easy flammable liquids (fuel, petrol etc) If there is any problem with this oil pump, please contact customer service in time, and you will get a satisfactory result..
Check Stock

8AN 20FT Fuel Line Hose Kit with End Fittings Nylon Stainless Steel Braid Black 1/2' - 11.12mm ID (AN8)

  • 【Includes】The 8AN nylon and stainless steel braided CPE fuel line kit includes: 10pcs 8an CPE hose ends (4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends) and 1/2 CPE braided fuel line (Length:20ft/6M).
  • 【Materials】The 8AN CPE fuel line Hose mostly used in cooler system and pump, fuel system, transmission system, Can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, coolant, fuel, and etc, but not applicable to E85..
  • 【Lifetime】The 8AN CPE hose working temperature range: -40℉ to 257℉ (-40℃ to 125℃). It is compatible with nearly every substance or agent used. Maximum Working Pressure (psi): 500 psi. Bursting Pressure (psi): 2000psi..
  • 【CPE Hose】The 8an CPE hose fitting is reused, just replaced a new olive/ferrule when reusing fittings with CPE hose. CPE tube is constructed with a seamless extruded CPE resin inner tube..
  • 【Warranty】Three months limited warranty & Free lifetime technical support..
Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

  • ...h long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
  • 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
  • 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in half..
Check Stock

QPKING Automotive Fuel Injection Systems Cleaning Tools, CFS Series Fuel System Cleaning Assistant Fuel Injector Cleaner 600ML 140PSI

  • Kindly Notice: To the throttle style system, the way of connection is the same, just adjust the pressure of the air source 1-5PSI.
  • NOTE:Clean liquid not include,work on gasoline injector only, not for diesel injector.
  • The system is not only characteristic of high and low pressure cleaning function. At the same time put the function of the whole combustion chamber fuel system of several major functions in one product, such as cleaning throttle valve and the fuel nozzle..
  • The injector clean kits include many different kinds of adapter, cover almost all the EU,Asia,USA cars and light trucks (petrol and diesel). Non-Dismantle injector Throttle and fuel system..
  • Throttle model: The way of connection is the same, just adjust the pressure of the air source 1-5PSI. The way to identify the inlet and return hose: 1.Generally speaking, inlet hose is bigger, return hose is samaller.
  • 2.There is always a filter connected in the inlet hose side, and a buffer in the return side.
  • 3.There is arrow on the hose to show the fuel flow direction.
Check Stock

WMYCONGCONG Oil Quick Change Pump Extractor 12V 60W Fluid Extractor Motor Oil Diesel Transfer Pump for Car Boat Motorbike Quad RV ATV and Other Vehicles

  • 12V 60W Oil diesel extractor pump's perfect for quick and easy oil changes that you can do at home, help your oil-cleaning task, time-saving..
  • Ideal for motorcycles, cars, quads, truck, boat, forklift, generator, tractor, scooter and other 12v vehicles. But NOT suitable for gasoline/petrol.....
  • Easy to use, just need to place the inlet/outlet hoses at the appropriate positions, tighten the hose clamps, connect the power clamps to the car....
  • Efficient for fast and clean oil changes, It is very suitable for pumping motor oil, diesel and heating oil, and can be used in equipment such as car....
  • Package Content: 1 x 12V 60W Oil Extractor Pump.
Check Stock

KT Deals 4 Sizes Petrol Fuel Gas Line Pipe Hose Tubing for String Trimmer Chainsaw Blower and Other Power Tools for 2 Cycle Engine for Poulan Craftman

  • 4 Different Size Fuel Line Hose - I.D x O.D: 0.08" x 0.14" (2mm x 3.5mm), 1/8" x 1/4" (3mm x6mm),1/8" x 3/16"(3mm x5mm),3/32" x 3/16" (2.5mm x5mm).
  • 4 Feet Long Fuel Line Fuel Hose Fuel Tube.
  • Our Fuel Hose Line Tube Fits for Most 2 Cycle Small Engines.
  • Perfect Replacement Fuel Line Set for chainsaws, blowers, weedeater whackers trimmers and other engine machines.
  • Premium Material petrol fuel line - Oil and gas resistant, corrosion resistant..
Check Stock