Reviews Petg Sheet

SUNLU S9 Plus Large 3D Printer, FDM 3D Printers with Filament Dryer Integration, Clog Detection, Auto Leveling, Silent Motherboard, Open Source, Touch Screen, Big Printing Size 310x310x400mm

  • 【8 Rolls of 0.25kg 1.75mm PETG Filament, Multiple Color Choices】8 rolls of 250g SUNLU 1.75mm PETG filament.Color:Black+White+Grey+Transparent+Blue+Green+Red+Orange.The design of 250g PETG filament is convenient for customers with multiple color needs.Especially for multi-nozzle 3d printer users and 3d pen users..
  • 【SUNLU Toughness-enhanced PETG Filament】SUNLU 3d filament PETG 1.75mm is a rigid, tough, high performance material, offering excellent clarity, light transmission and high gloss. It’s about as stiff as PLA. PETG 3d filament suggest printing temperature is 220-250°C – Base Plate Temperature: 70-80°C if no glue applied..
  • 【High Precision +/- 0.02mm Tolerance PETG filament】: 1.75mm PETG 3D filament(Tolerance Level : ± 0.02mm).0.25KG 3d printer filament reel,perfect roundness and very tight diameter tolerance,approximately 68m of PETG filament on each spool ease of use,minimal warping,no clogging,no bubbles.Increase your 3d printing objects delicacy..
  • 【Tangle Free& No Plugging】 Better flow of SUNLU no plugging premium 1.75mm PETG filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free..
  • 【High Compatiblity & Vacuum Pack PETG Filament】Compatible with ....
Check Stock

Wisamic 3 Pack 220mmx220mm 3D Printing Build Surface Heat Bed with Adhesive 10mm Grid for 3D Printers MK2/MK2A Reprap Mendel

  • Easy installation - This 3D printing build surface has plated with adhesive for easy install on your 3D Printer. Build sheet adheres to a print bed to....
  • More convenient - Comes with 1cm grid line full printing. Easy to calibrate your 3D printers and the size of your 3D prints. Besides, it is also easy....
  • Long life - Single sheet installs quickly with less hassle than film or tape. Long print life per sheet. Extend the life of a sheet by wiping with a....
  • Compatibility - Works well with PLA, PETG, ABS and more filament types. Specially designed to fit the 3D Printers MK2/MK2A, Reprap, Mendel..
Check Stock

Geeetech PETG Filament 1.75mm, Upgrade Stronger Toughness Printing Consumables, Diameter Tolerance +/- 0.03 mm, 1 KG (2.2 LBS) Spool Fit Most FDM 3D Printer, Black

  • 【PETG FILAMENT BUNDLE】- 250g petg filament,250g black petg filament, 250g white petg filament, 250g red petg filament, 250g blue petg filament..
  • 【PREMIUM QUALITY】 : Good shaping, strong toughness, no bubble, no jamming, no warping, melt well, feed smoothly and constantly without clogging the nozzle or extruder. Amolen petg filament, which have premium quality, print Much More Smoothly..
  • 【HIGH COMPATIBILITY 】-Works and harmonizes perfectly with most common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.03mm. Stable diameter accuracy offer you a smoothly feeding experience..
  • 【VACUUM & REUSABLE BAG】 - Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the petg filament can be put back into the bag after use and sealed for storage..
  • 【WARRANTY & AFTER-SALES SERVICE】--Amolen is focus on high quality 3D petg filament, defective filament can be reissued or refunded fully.We provide professional 3D printing technical guidance and good 24/7 customer service..
Check Stock

HATCHBOX PETG 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Orange

  • 【PETG Filament - Advantages 】 IEMAI PETG filament combine the advantages of PLA and ABS, it’s strong and durable, with high purity, low shrinkage and excellent adhesion, which makes your printing more delicate. The storage hole is designed to place the end of the filament to prevent tangling. Eco-friendly and odor-free..
  • 【PETG Filament 1.75mm - Clarity & Light Transmission 】Color :Transparent blue.
  • Tolerances: +/- 0.02 mm, 1 kg spool (2.2lbs).Our PETG Transparent offers excellent clarity, light transmission (in the translucent colors) and high gloss. NOTE: The light transmission of prints can be influenced by infill, thickness and varying size of printed the objects..
  • 【3D Printer Filament - Vacuum Packaging 】 Completely dried for 24 hours before packaging. IEMAI use vacuum-sealed bag for packaging 1.75mm petg filament to keep the humidity percentage controlled and at a minimum to maintain excellent printing performance..
  • 【PETG Filament 1.75 - No Tangle and Easy to Use】 Full mechanical winding and strict manual examination, which guarantee the PETG filaments tidy and easy to be fed. IEMAI PETG Spool is more stronger and can achieve very strong and sturdy prints..
  • 【3D Printing Filament - Print Smoothly】No clogging, ....
Check Stock

PETG Filament Enotepad PETG Filament 1.75mm for 3D Printer 1KG Spool 2.2lbs Dimensional Accuracy + / - 0.02 mm PETG Black

  • [About Enotepad PETG Filament] PETG Filament produce in strictly procedures, strong adhesion, no bubbles, ultra smooth technology, low odor, provide....
  • [Dimensional Accuracy and Consistency] 3D PETG filament 1.75mm with strict tolerance, dimensional accuracy + / - 0.02 mm. Advanced CCD diameter....
  • [Compatible with 99% FDM 3D Printer & 3D pen] Enotepad PETG Filament fits for most FDM 3d printers and 1.75mm 3d pen on the market. The wide....
  • [100% Vacuum-sealed Packaging] Use vacuum-sealed packaging bag for packaging PETG filament to keep the humidity percentage at a minimum and....
  • [What You Get] PETG Filament 1 KG, Friendly Customer Service, and 12 Months Warranty. If you have any questions about our 3D PETG Filament, you can....
Check Stock

Creality PETG Filament 1.75 mm - White | 3D Printer Filament | 1Kg Spool (2.2 Lbs) | Dimensional Tolerance +/- 0.2 mm | Fit Most FDM Printers

  • SPECIFICATION - Filament Diameter – 1.75mm | Weight – 1Kg Spool (2.2 Lbs) | Color – White | Dimensional Tolerance +/- 0.2 mm | High Precision | No Bubbles | Eco-Friendly | Stronger Toughness | Fit with Most FDM Printers.
  • MATERIAL - Creality PETG Filament offers excellent clarity, light transmission (in the translucent colors), and high gloss. PETG is also a food contact approved material, is BPA free and prints without any odor or smell! Once you've mastered the basics for printing with PETG, you will find it to be easy to print with and comes out great in a wide temperature range. PETG material, environmental protection, high gloss, printing is not easy to crack and will not emit odor..
  • QUALITY – Creality PETG filament is great even for large flat prints due to its very low shrinkage. A combination of strength, low shrinkage, smoother finish, and higher heat resistance make PETG an ideal everyday alternative to PLA and ABS. Other features include great layer adhesion, chemical resistance including acids and water. PETG is also less prone to moisture-related issues..
  • FIT MOST FDM PRINTERS - Creality PETG filament is characterized by consistent quality, high dimensional accuracy, and has been extensively tested on a variety of printers.
Check Stock

IEMAI PETG 3D Printer Filament Transparent Red PETG Filament 1.75mm Dimensional Accuracy +/- 0.02 mm 1KG Spool for 3D Printer

  • 【Advantages - PETG Filament】 IEMAI PETG filament combine the advantages of PLA and ABS, it’s strong and durable, with high purity, low shrinkage....
  • 【Dimensional Accuracy】 PETG 3D Printer Filament ─Transparent Red. Diameter: 1.75mm.
  • Tolerances: +/- 0.02 mm, 1 kg spool (2.2lbs).Our PETG....
  • 【Vacuum Packaging 】 Completely dried for 24 hours before packaging. IEMAI use vacuum-sealed bag for packaging 1.75mm petg filament to keep the....
  • 【No Tangle and Easy to Use】 Full mechanical winding and strict manual examination, which guarantee the PETG filaments tidy and easy to be fed.....
  • 【Print Smoothly】No clogging, no tangles, no bubbles to ensure smooth feeding and stable printing, so that the printed parts have excellent surface....
Check Stock

AMOLEN 3D Printer Filament Bundle, PETG Filament 1.75mm,Clear/White,Red,Green,Blue Filament,PETG Transparent Filament with Light Transmission Feature,250g x 4 Spools Set

  • 【4 COLORS PETG TRANSPARENT FILAMENT BUNDLES】 - Package come with 4 colors Clear/White, Red, Green, Blue 250g/spool 3D Printer PETG filament Bundles. Multicolor Filament Bundles meet your everyday needs in design and prototyping..
  • 【LIGHT TRANSMISSION FEATURE】 - This transparent PETG filament Bundle have light transmission properties, PETG is uniform and soft with strong light penetration in the translucent colors. Different thickness of the outer wall shows different light transmission effects. It’s a suitable choice for printing lamps, lampshade, Vase or Christmas tree at all..
  • 【PREMIER MATERIAL】 - 3D Printer PETG Transparent Filament Bundles Raw materials are from USA, durable, solid and odorless. Good shaping, strong toughness, no bubble, no jamming, no warping, melt well, feed smoothly and constantly without clogging the nozzle or extruder. AMOLEN PETG filament, which have premium quality, print Much More Smoothly..
  • 【HIGH COMPATIBILITY 】- AMOLEN 3D PETG Filament Bundles perfectly compatible with most of the FDM 3d printer on Market, 1.75mm PTEG filament with high diameter tolerance, dimensional accuracy +/- 0.03mm. Stable diameter accuracy offer you a smoothly feeding experience..
  • 【VACUUM BAG & HASSLE FREE】 - Vacuum packaging wit....
Check Stock

HICTOP Flexible Steel Platform with PEI Surface and Magnetic Bottom Sheet with Adhesive 235x235mm for Ender-3 Pro, Ender-3 V2，Ender-3 3D Printers

  • The HICTOP PEI sheet is combined with 2 parts, a flexible steel platform coated with PEI surface and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied..
  • The HICTOP PEI sheet is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed..
  • Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature. It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃.
  • Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it..
  • The size of HICTOP glass bed is 235*235mm（9.25*9.25inch）, it is applicable with Creality 3D printer such as Ender-3 Pro, Ender-3 V2，Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro，CR-20, CR-20 Pro and similarly sized machines..
Check Stock

Dry Box for 3D Filament Storages, JAYO Filament Dryer Box, Keeping Filaments Dry During 3D Printing, Compatible with 1.75mm, 2.85mm, 3.00mm Filament and PLA PETG TPU ABS Material, Spool Holder

  • PETG filament,PETG multicolors,PETG rainbow ,net weight 1kg.
  • PETG is tough and practical useful, gradient colors looking nice.
  • Recommend setting, nozzle temp 220-230 degree,hotbed 70, printing speed 23-38mm/s,retraction speed 45mm/s,retraction length 4mm.
  • Recommend as soon as possible to print the whole roll filament once it opened..
  • Controlling the moisture content of the PETG material is critical for 3D printing because the PETG molecular structure automatically tends to dehydrate even when the vacuum package is not opened. Drying temperature 70, lack of equipment can be exposed to the sun exposure for 4 hours.
Check Stock