Reviews Performance Cylinder Kit

Zeda 80 Performance Bicycle Engine Kit with Dio Reed Valve & OKO Carb - Silver - Motorized Bike (36 Tooth)

  • Take your 2-stroke motorized biking to the next level with this complete Dio performance kit including the engine, mounting hardware, and stock exhaust pipe.
  • The included Dio reed valve, OKO carb, K&N style air filter (or optional velocity stack), and modified Dio cylinder round out this performance package that will yield tons of torque and increased speed.
  • For even more power and performance it can also be paired with our Zeda88 performance pipe (select from the drop down above).
  • or pick up a Dio Upgrade Kit for just $99.
  • Kit includes: 2.95 HP 2-stroke engine, modified Dio cylinder with piston, 21mm OKO flat side carburetor, 6 flap Dio reed valve, K&N style mesh air filter.
  • Performance parts: stainless steel allen bolts, enhanced balanced crank, upgraded bearings + 60% thicker crank case around bearings, stuffed crankcase, large intake port (40mm bolt hole width), round exhaust port 40mm crank stroke (more powerful, efficient, and reliable), type B piston (high wrist pin), long rod (89mm).
Check Stock

Mophorn GO-KART Brake Master Cylinder Kit for 150cc Go Kart Hydraulic Brake Kit Universal Go Karts Brake Kit Kandi Complete Including Master Cylinder, Hose, Caliper, Pad for 150cc

  • High Adaptability: This go-kart hydraulic brake kit is compatible with Hammerhead and Trailmaster karts and other 150cc go-karts. It provides superior performance demanded by off-road enthusiasts..
  • Promised Braking & Cooling: This hydraulic brake kit features heavy-duty stopping power for everyday drivability. Drilled & slotted rotors improve heat dissipation during extreme conditions..
  • Quality Material: The master cylinder of this go-kart brake kit is made of high-performance aluminum, preloaded with DOT3 brake fluid. The brake discs are constructed from high-quality steel, durable and lasting for daily use..
  • Complete Accessories: The go-kart hydraulic brake assembly includes a master cylinder, three brake calipers, three brake hoses, and brand-new brake discs. It comes ready to install, pressurized with brake fluid. Do not worry about bleeding the brakes..
  • Key Parameters: Bolt Spacing of Master Cylinder Brake Pedal: 0.787" / 20 mm.
  • Master Cylinder Mounting Hole: 2.36" / 60 mm center to center. Three rubber brake hoses: 34" / 860 mm, 43" / 1090 mm, 75" / 1900 mm..
Check Stock

K-0650 Air Compressor Cylinder Sleeve and Compression Ring Kit Compression Piston Ring Kit Assembly fit for Craftsman Porter Cable DeVilbiss 165080

  • 【Application】Compatible with both the single cylinder oil-free pumps and the twin cylinder oil-free pump, fits for DeVilbiss, for Porter Cable,....
  • 【High Performance】Direct replacement for OEM part number K-0650 both in quality and functions. Specially designed to easily & properly service the....
  • 【Package Includes】This Compression Ring Kit contains 5 parts: 1 x D25837 Coated Cylinder Sleeve, 1 x DAC-308 Coated Oil Free Piston Ring, 1 x....
  • 【Superior Material】The cylinder sleeve is made from high strength STEEL for wear and rust resistance, hardened to ensure tough and high pressure....
  • 【100% Satisfaction Guarantee】If you're not satisfied with our K-0650 Cylinder and Piston Ring Kit, simply return it for a full refund in 30 days.....
Check Stock

YFS200 Carburetor Includ Ignition Coil + Fuel filterTop End Kit Replacement for Yamaha Blaster 200 YFS200 1988-2006, by LIYYOO

  • Brand New & High Quality，Carburetor For Yamaha Blaster 200 YFS200 1988-2006 Ignition Coil AIR FILTER CLEANER TOP END KIT SET.
  • Fits for Yamaha Blaster 200 YFS200 Year 1988-2006.
  • Intake Diameter: 28mm，Air Filter Mount: 43mm.
  • carburetor rebuild repair blaster performance carburetor fit for mikuni yamaha shipping filter cylinder carburetor blaster motorcycle ELEMENT YFA 125 YFA125 1988-2006,New High Performance Racing Ignition Coil for Yamaha Yfs200 Blaster Atv 1988-2006 top end kit rebuild kit for yamaha 1989 yamaha blaster cylinder.
  • 100% satisfactory service, if you have any questions, please feel free to contact us by email!We will solve it for you in the first time!.
Check Stock

269 Motorsports Tick Performance Adjustable Clutch Master Cylinder Kit for 97-04 Corvette C5 & Z06 TAMCKYB

  • Tick Performance Adjustable Clutch Master Cylinder Kit for 97-04 Corvette C5 and Z06.
  • Custom Tilton Adjustable Master Cylinder.
  • Unrestricted and Heat-Wrapped Clutch Hydraulic Line.
  • Includes All Necessary Hardware and Easy to Understand Instructions.
  • Flows More Fluid Than Any Other Master Cylinder Available.
Check Stock

Glixal 52mm Big Bore Cylinder Kit Rebuild Kit GY6 49cc 50cc to 105cc 139QMB 139QMA Scooter Moped ATV Go-Kart

  • 1.Please note this kit is only used for GY6 139QMB 4-Stroke Engine..
  • 4.Include Cylinder,Piston,Piston Ring,Piston Pin,Piston Pin Clip,Valve Oil Seal,Gaskets,Tensioner Gasket,Exhaust Gasket,Intake&Exhaust Studs,Exhaust....
  • 5. High Performance Upgrade 52mm Cylinder Rebuild Kit for GY6 49cc 50cc 60cc 80cc 100cc engine.
Check Stock

RTP Ford Tractor Fuel Tappet Fuel Shut Off

  • Steering Cylinder Seal Kit (with 1/2" Rod) that fits Ford / New Holland Models: 2000, 2031, 2100, 2110, 2120, 2131, 2150, 230A, 231, 2310, 234, 2600, 2600N, 2600R, 2600V, 2610, 2910, 3000, 3055, 3100, 3120, 3150, 3330, 334, 335, 3600, 3600N, 3600NO, 3600R, 3600V, 3610, 3610NO, 3610V, 3900, 3910, 3910R, 3910V, 4000 (4 cyl), 4031, 4100, 4110V, 4120, 4131, 4140, 4330, 4340, 4600SU, 4610SU, 4610V, 530A, 531, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 800, 801, 811, 82.
  • This part is produced with top quality materials under strict quality control, yielding above average performance..
  • SPECIALTY MOTORS Delivering Excellency nationwide!!!.
Check Stock

CERAKOTE Ceramic Coating Starter Kits Performance

  • - CERAKOTE Performance Colors Starter Kit includes the following Elite Series colors: FLAT DARK EARTH - SMOKE - BLACKOUT.
  • - You are buying this product directly from CERAKOTE, the manufacturer, and not a reseller..
  • - Starter Kit includes the following: 3 Performance Colors, Catalyst (hardner), and 50ml Graduated Cylinder. Coating instructions and other resources....
  • - Starter Kit ALSO includes a Spray Gun - This is an intermediate level, Cerakote Trainer approved HVLP spray gun..
  • - Designed for the beginner wanting to try Cerakote, these kits provide you with the professional coating and essential tools needed to get you....
Check Stock

ALAVENTE Car Cylinder Head Cover Stud Kit High Strength Cylinder Head Screws Fit for BMW Mercedes (OEM：PCE279.1005) (12008)

  • APPLICABLE - Fit for BMW Mercedes Head Stud Kit, perfect replacement for the old or broken parts (OEM: PCE279.1005)..
  • FUNCTION - Improve the performance of your car, make your driving more smoothly, making your engine at peak performance..
  • MATERIAL - Made with high quality Aluminum for maximum durability. Head Studs are thermally treated at high pressure to improve structural strength. Coated with black oxide finish to resist rust and corrosion..
  • FEATURE - The cylinder head studs simply provide better and more consistent cylinder head torque loading. Ample clamping force prevents cylinder heads from lifting..
  • HIGH STRENGT - Threads rolled after heat treatment for optimum fatigue strength. Head gasket system can withstand high pressures, high temperatures and aggressive media of a car..
Check Stock

Ambienceo 26” 28” Black 2 Stroke 50cc 80cc Cycle Bicycle Gas Motorized Gasoline Engine Motor Kit CDI Air Cooling For Mountain and Road Bike 80cc Silver

  • CDHPOWER LD90 Cylinder Body w/Piston Kit.
  • Compatible with bottom end of all brand 2 stroke gas motor kit 66cc/80cc/pk80/LD80/LD90 including other....
  • New pk80 upgraded cylinder with piston kit, the piston kit is installed well inside of cylinder already.Excluding cylinder head..
  • Cylinder head gasket and cylinder body gasket are included.
  • The LD90 Cylinder Body and piston kit can be replacement of most 2-stroke gas motor engine such as pk80/LD80/LD90.
  • piston pin:10mmx39mm.This is a high hole piston for a 40mm stroke but with 48mm bore..
Check Stock