Reviews Pei Sheet Prusa Mk3s

1set 3D Printer MK3 Drive Gear extruder Dual Gears kit DriveGears Extrusion Wheel for Upgrade Prusa i3 MK2 MK2S MK2.5 3D Printer (5mm bore)

  • The Original Prusa i3 MK3S+ is the latest version of our award-winning 3D printers, equipped with US Power Supply and 8GB SD card.
  • This listing is a DIY KIT for self-assembly.
  • We also offer a fully built and tested 3D printer.
  • Fully automatic Mesh Bed Leveling process, IR filament sensor built-in, supports filament auto-loading.
  • Genuine Gates belts, Bondtech drive gears, EINSY RAMBo motherboard, and many other features are the reason why the MK3S+ is the perfect 3D printing workhorse.
  • The kit includes a free 1kg filament spool of Silver PLA.
  • Prusa Research offers lifetime technical assistance and 24 hours professional customer service. This printer is sold directly from Prusa Research.
Check Stock

Clone Prusa i3 MK2.5S MK3S MMU2S Complete Kit (Without Printer Parts) for Prusa i3 MK2.5S/MK3S Multi Material 2S Upgrade Kit

  • The Original Prusa i3 MK3S+ is the latest version of our award-winning 3D printers, equipped with US Power Supply and 8GB SD card.
  • This listing is a DIY KIT for self-assembly.
  • We also offer a fully built and tested 3D printer.
  • Fully automatic Mesh Bed Leveling process, IR filament sensor built-in, supports filament auto-loading.
  • Genuine Gates belts, Bondtech drive gears, EINSY RAMBo motherboard, and many other features are the reason why the MK3S+ is the perfect 3D printing workhorse.
  • The kit includes a free 1kg filament spool of Silver PLA.
  • Prusa Research offers lifetime technical assistance and 24 hours professional customer service. This printer is sold directly from Prusa Research.
Check Stock

Original Prusa i3 MK3S+ 3D Printer, Ready-to-use FDM 3D Printer, Assembled and Tested, Removable Print Sheets, 1kg Filament Included, Print Size 9.84×8.3×8.3 in.

  • The Original Prusa i3 MK3S+ is the latest version of our award-winning 3D printers, equipped with US Power Supply and 8GB SD card.
  • This is an assembled and tested printer, so to start your first print, simply plug it in, run the initial calibration, and you are good to go.
  • Fully automatic Mesh Bed Leveling process, IR filament sensor built-in, supports filament auto-loading.
  • Genuine Gates belts, Bondtech drive gears, EINSY RAMBo motherboard, and many other features are the reason why the MK3S+ is the perfect 3D printing workhorse.
  • The printer includes a free 1kg filament spool of Silver PLA.
  • Prusa Research offers lifetime technical assistance and 24 hours professional customer service. This printer is sold directly from Prusa Research..
Check Stock

Prusa i3 MK2 MK3 MK3S Mini V6 Brass Nozzle Replacement - 1.75mm x 0.40mm

  • ✔️ Compatible with Prusa i3 MK2, MK2.5, MK3, MK3S or MINI 3D printer.
  • ✔️ Designed for smooth and easy flow of filament.
Check Stock

3Dman Dual Drive Bowden Extruder Universal Geared Extruders for CR10, Ender 3 Series, Anycubic Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10, Prusa I3 and DIY 3D Printer

  • Provides more reliability with retractions when using the MMU.
Check Stock

P.I.N.D.A V2 PINDA Sensor Auto Bed Leveling Sensor Probe 4PIN Compatible with Prusa i3 MK3 MK2.5 MK3S MK2.5S 3D Printer

  • This is the P.I.N.D.A probe version 2 Compatible with Prusa i3 Mk3 mk3s mk2.5 mk2.5s 3D Printers..
  • This probe is exactly the correct probe and has been tested with same electronics and firmware as the original probe and works to same effect..
  • Wire length and molex connector included..
Check Stock

HICTOP Flexible Steel Platform with PEI Surface and Magnetic Bottom Sheet with Adhesive 235x235mm for Ender-3 Pro, Ender-3 V2，Ender-3 3D Printers

  • The HICTOP PEI sheet is combined with 2 parts, a flexible steel platform coated with PEI surface and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied..
  • The HICTOP PEI sheet is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed..
  • Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature. It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃.
  • Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it..
  • The size of HICTOP glass bed is 235*235mm（9.25*9.25inch）, it is applicable with Creality 3D printer such as Ender-3 Pro, Ender-3 V2，Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro，CR-20, CR-20 Pro and similarly sized machines..
Check Stock

HONG YI-HAT GT2 Idler Pulley Without Tooth Timing Belt Pulley Wheel 3/5MM Bore Width 6MM 3D Printer Parts for prusa I3 MK3 MK3S Drone Spare Parts Size Bore 5mm

  • Bore 3mm: For Prusa I3/MK2.5/SMK3/MK3S, etc.
  • Bore 5mm: For Wanhao I3 and other FDM printers.
Check Stock

2-Pack 3pin Dual Ball Bearing DC Fans DC 5V 4010 Extruder Hotend Cooler Radiator Left Hotend Fan for Prusa i3 MK3 MK3S MK2/2.5 3D Printer

  • Dual Ball bearing fan, Long lifetime 50000Hours tested under 40degree temperature.
  • It has two sides, but the side with sticker must be always facing the hotend (not visible when the fan is mounted). Otherwise, the cooling won't work....
  • 5V DC 0.1A, This fan is used for Prusa i3 MK3 MK3S MK2/2.5 3D printer Extruder.
  • Power connector:3pin with RPM measuring function.
Check Stock

HICTOP Ender 3 v2 Upgrades Flexible Build Plate PEI Steel Sheet 235x235mm Works for Ender 3/Ender 3 Pro/Ender 5 3D Printers

  • Hight Flatness/long lasting :Improved HICTOP PEI plate provides more flat and more smooth build surface than other plate, ensuring high flatness for the bottom of model.long lasting，The service life of our pei is 10 times longer than other Glass Bed.
  • easy to use/Easy to clean： simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed.It can be cleaned easily with water or alcohol.
  • New upgrade: movable, magnetically fixed construction surface, model can be easily removed. Say goodbye to disassembly tools, shovels and knives. Reduce workload and save time.
  • No Edge Curling/Strong adhesion： The HICTOP PEI sheet is molds could stick on bed firmly without glue, avoiding the issue of print edges curling.Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, without using any glue or other tools to help the model to stick onto the sheet.
  • Packing: Textured steel platform coated with PEI surface *1 magnetic bottom sheet with adhesive on the back *1.
Check Stock