Reviews Pe Gas Coil Pipe

Gas Flex 3/4 GAS Tubing Pipe KIT 33 Ft with 2 Fittings GasFlex Natural GAS Propane

  • FLEXIBLE ALUMINUM PIPE WITH INSIDE AND OUTSIDE PE COVER.
  • 3/4" Nominal Pipe size: 16mm ID x 20mm OD (0.625" ID x 0.787" OD).
  • CAPACITY: 220,000 BTUH FOR LPG APPLIANCES : 200,000 BTUH FOR NATURAL GAS APPLIANCES.
  • KIT arrives with the brass connectors hand tightened for ease of installation.
  • Comes with 2 fittings , the fittings are MALE NPT 3/4" both ends.
Check Stock

Gas Flex 3/4 GAS Tubing Pipe KIT 66 Ft with 2 Fittings GasFlex Natural GAS or Propane

  • FLEXIBLE ALUMINUM PIPE WITH INSIDE AND OUTSIDE PE COVER.
  • Comes with 2 fittings , the fittings are MALE 3/4" NPT thread.
  • CAPACITY: 150,000 BTUH LPG APPLIANCES, 140,000 BTUH FOR NATURAL GAS APPLIANCES.
  • KIT arrives with the brass connectors hand tightened for ease of installation.
  • 3/4" Nominal Pipe size: 16mm ID x 20mm OD (0.625" ID x 0.787" OD).
Check Stock

279834 Gas Valve Ignition Solenoid Coil Kit by Beaquicy - Replacement Part for Ken-more Whirlpool Samsung Estate Magic Chef Dryer - Replaces ap3094251

  • ✅ 【ULTRA DURABLE PRODUCT】: The 279834 Gas Valve Coil Set is suitable for dryers. The 279834 dryer valve ignition solenoid kit has a 3-terminal boost/hold coil and a 2-terminal secondary coil.This is a safety mechanism to ensure that there is no unsafe gas accumulation in your device. When the igniter reaches a sufficiently high temperature, these coils open the gas valve, allowing gas to enter the burner..
  • ✅ 【PRODUCT PACKAGE】:Includes 1 Pair x 279834 dryer gas valve ignition solenoid coil kit.279834 Gas Valve Ignition Solenoid Coil Kit includes two new gas coils. One coil is the primary coil and the other is the safety coil. No matter which component stops working, it should be replaced in pairs.Because both coils must be operable,then the valve can be opened,and the heating element will work normally.The kit can replace most new style gas coils..
  • ✅【365 DAYS WARRANTY】:279834 Gas Valve Coil Set supports 365 days return and exchange.Our company attaches great importance to the shopping experience of each customer.Risk-free shopping, If you have any quality problem during warranty period, please contact customer service in time. We will try our best to solve the problem. Customer satisfaction is our tireless pursuit..
Check Stock

Hotop Push to Connect Fittings Air Line Pneumatic Fittings Kit 60 Pieces Quick Release Pneumatic Connectors Air Line Fittings 15 Splitters 15 Elbows 15 Tee 15 Straight Tubes (Blue,3/8 Inch Od)

  • What you get: the package comes with 15 pieces direct pneumatic parts (PU), 15 pieces V two-way parts (PV), 15 pieces T tee parts (PE) and 15 pieces Y tee parts (PY).
  • Different styles can suit different pneumatic piping needs.
  • Quality material: the chuck connecting the gas pipe is made of high-strength plastic material, which is not easy to fall off after connection.
  • The sealing element has good sealing performance and is not easy to leak.
  • The pneumatic parts have high strength, which are not easy to burst and ensure long service life.
  • Easy to use: you can just push the hose or tube into the fitting without worries because it is strong, and release the ring to make it easy to remove.
  • These push to connect fittings are easy and convenient for you to operate.
  • Different styles: there are 4 different types of pipe fittings, including tee, elbow, Y and straight, which can arbitrarily change direction after installation, and can be manually inserted and pulled out from the gas pipe without extra tools.
  • Wide application: all models of push lock fittings are suitable for air pipes, pneumatic tools and more, and can be applied to connect pipes and different pneumatic components.
Check Stock

Hotop Push to Connect Fittings Air Line Pneumatic Fittings Kit 60 Pieces Quick Release Pneumatic Connectors Air Line Fittings 15 Splitters 15 Elbows 15 Tee 15 Straight Tubes Black,1/4 Inch Od

  • What you get: the package comes with 15 pieces direct pneumatic parts (PU), 15 pieces V two-way parts (PV), 15 pieces T tee parts (PE) and 15 pieces Y tee parts (PY).
  • Different styles can suit different pneumatic piping needs.
  • Quality material: the chuck connecting the gas pipe is made of high-strength plastic material, which is not easy to fall off after connection.
  • The sealing element has good sealing performance and is not easy to leak.
  • The pneumatic parts have high strength, which are not easy to burst and ensure long service life.
  • Easy to use: you can just push the hose or tube into the fitting without worries because it is strong, and release the ring to make it easy to remove.
  • These push to connect fittings are easy and convenient for you to operate.
  • Different styles: there are 4 different types of pipe fittings, including tee, elbow, Y and straight, which can arbitrarily change direction after installation, and can be manually inserted and pulled out from the gas pipe without extra tools.
  • Wide application: all models of push lock fittings are suitable for air pipes, pneumatic tools and more, and can be applied to connect pipes and different pneumatic components.
Check Stock

1 CTS Elster Natural Gas Permasert Line Chamfering Tool Version 2 PN 58504

  • Line size: 1 inch CTS Poly Pipe (1-1/8" Outer Diameter) *Please review sizing diagram..
  • Creates a proper O.D. and I.D chamfer which prevent seal damage when stabbing of the PE piping into New 2.0 Permasert couplings. REQUIRED to properly....
  •  IMPORTANT NOTE: There are various pipe sizes described as either IPS or CTS. These are DIFFERENT pipe sizing standards with different OUTER and....
Check Stock

Shok Blok SB-FPV-40 Water Filter Pressure Regulator Protection Valve for RO & Filter Systems - 1/4\ QC Ports, 40 PSI

  • GAS TYPE & PRESSURE - Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 3" - 6" Water Column.
  • PIPE THREAD SIZE - 3/4" Inlet & 3/4" Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as close to 1-1/16 inch as shown in the picture’s table..
  • CAUTION - This regulator has 1-1/16" openings for 3/4" gas pipes. The 3/4" gas pipe means interior diameter 3/4" but outside diameter is 1-1/16.
Check Stock

iSpring 14702 APR40 Pressure Regulator Filter Protection Valve with 1/4\ Quick Connect, 40 Psi, white

  • GAS TYPE & PRESSURE - Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 4" - 8" Water Column.
  • PIPE THREAD SIZE - 1/2" Inlet & 1/2" Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as 13/16 inch..
  • CAUTION - This regulator has 13/16" openings for 1/2" gas pipes. The 1/2" gas pipe means interior diameter 1/2" but outside diameter is 13/16"..
  • MARKING - Model: RV47L, Marking: 1/2 PSIG, Po 4" - 8". Inlet pressure 1/2 PSI. Adjustable outlet pressure 4" - 8" Water Column..
  • OPERATE TEMPERATURE - 32°F - 225°F (0°C - 107°C). Overall Dimension: 2-7/8” W x 2-1/4” D x 2-1/2” H. This is a small size regulator. Refer to pictures for detailed dimensions..
Check Stock

General Tools Hose and Tubing Cutter #115 - Cuts up to 2 Inch Flexible Rubber, PVC, ABS and Polyethylene Tubing

  • CUTS RUBBER TUBING: Cuts up to 2-inch rubber hose or tube..
  • CUT PE OR ABS PIPE: Cuts up to 1-1/2 inch PE and ABS pipe..
  • CUTS PVC PIPE: Cuts up to 1-1/4 inch PVC pipe..
  • HOLDS TIGHT: The curved holder supports the hose or tubing during square cuts..
  • LONG HANDLES: Long handles for added leverage..
Check Stock

Maxitrol RV48L Natural Gas Pressure Regulator 1/2 FPT Thread 13/16 In and Out Opening 1/2 PSIG In 3 -6 WC Out

  • GAS TYPE & PRESSURE - Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 3" - 6" Water Column.
  • PIPE THREAD SIZE - 1/2" Inlet & 1/2" Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as close to 13/16 inches as shown in....
  • CAUTION - This regulator has 13/16" openings for 1/2" gas pipes. The 1/2" gas pipe means interior diameter 1/2" but outside diameter is 13/16", refer....
  • MARKING - Model: RV48L, Marking: 1/2 PSIG, Po 3" - 6". Inlet pressure 1/2 PSI. Adjustable outlet pressure 3"-6" Water Column..
  • OPERATE TEMPERATURE - 32°F - 225°F (0°C - 107°C). Do not install the regulator too close to the heating equipment or use in very cold environment.....
Check Stock