Reviews Pci Sata Ide Card

ASHATA PCIE SATA Card,PCI-E to SATA3.0 Controller Expansion Board 8-Port SATA3.0 Interface Expansion Card,PCI-E SATA Adapter Card Fit for Windows 7/8/XP/10

  • 【PCI-E to SATA 3.0 Card】Supports AHCI1.0 mode and IDE mode, native command queue (NCQ), FIS based on port multiplier switch or command switching and hot plug..
  • 【Compatible with SATA6G/3G /1.5G Hard Drives.】Supports communication speeds of 6.0 Gbps, 3.0 Gbps and 1.5 Gbps.
  • supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i..
  • 【Wide Compatibility】Compliant with Serial ATA 3.0 specification, backward compatible with SATA2.0 SATA1.0.
  • PCI-Express v2.0 compliant, backward compatible with PCI-Express v1.0..
  • 【Note】PCI-E must have a slot above V2.0, V1.0 will not exceed 250M, PCI-E can be X1 or X16 as long as it is V2.0 version, there is spare X16 slot directly into X16 slot on..
  • 【Tips】User with SATA3.0 data cable for best results.Any questions,Please feel free contact us,we will provide you with high quality after-sales service..
Check Stock

SATA 3.0 2Port PCIe Controller Card,PCI Express to SATA III 6Gbps with Fixed Brackets,Plug and Play

  • This PCI-e to SATA card is suitable for any chassis, whether it is ATX, M-ATX or ITX chassis..
  • The interface adopts 2XSATA interface, PCI-e slot can be used regardless of PCI-E (1X 4X 8X 16X), and full-speed 6GBPS bandwidth transmission..
  • Plug and play, support hot swap, PCI-E card supports IDE/AHCI programming interface, main control chip is suitable for ASM1061..
  • The package contains expansion card X1, bezel X1, CD X1, and the system is compatible with windows(R) XP/server2003/VISTA/7/8(32/64bit)/mac/linux..
  • After you purchase this product, if you have any questions about the product, please feel free to contact us. We will patiently answer it. When the product has quality problems, we will also properly handle it for you..
Check Stock

PCIe SATA Card 4 Ports 1X, PCI Express SATA 3.0 Controller Expansion Card 6 Gbps, SATA 3.0 PCIe Card SATA III Gen3 Adapter Riser Card with 4 SATA Cables &Low Profile Bracket Support 4 SATA 3.0 Devices

  • ✅PCIE 3.0 GEN3 SATA 2-port expansion card, provides 2 SATA 3.0 ports and 2 SATA cables, and supports SATA 3.0 version transfer speeds up to 6 Gbit/s..
  • ✅【Product Chip: PCI-E 3.0 GEN3 Chipset: JMICRON + JMB582, improve the stability and compatibility of PCIE SATA card. Support IDE/AHCI programming interface..
  • ✅【Simple installation, plug and play, support hot swap. Just plug it in and start working..
  • ✅PCIE 1X SATA card, compatible with PCIE1X/4X/8X/16 slots. The card also features a heatsink for long-lasting high temperature resistance..
  • ✅Compatible system: Windows7/8/10/XP/2003/2008/Linux. Please let us know if you have any questions..
Check Stock

BEYIMEI PCIe SATA Card 2 Ports, PCI-E to SATA Expansion Card,6Gbps PCI-E (2X 4X 8X 16X) SATA 3.0 Controller Card for Windows10/8/7/XP/Vista/Linux,Support SSD and HDD

  • Support hot swap, plug and play, easy to use..
  • Comply with Serial ATA 3.0 specification, backward compatible with SATA2.0, SATA1.0, conform to PCI-Express v2.0 specification, and backward compatible with PCI-Express v1.0..
  • 【2 Port SATA 3.0】support AHCI 1.0 mode and IDE mode, bus interface: PCI-Express x1 slot, expansion interface: 2 SATA 3.0 interfaces.
  • 【Support system】: Win10 / Win8 / Win7 / WinXP /Vista/Linux.System requirements: There is an available PCI Express X1 slot, while supporting PCI-E X2 X4 X8 X16.
  • Support 6.0 Gbps, 3.0 Gbps and 1.5 Gbps of communication speed.
Check Stock

CY Low Profile 4 Ports PCI-E to USB 3.0 HUB PCI Express Expansion Card Adapter 5Gbps for Motherboard

  • 4 Ports PCI-E to USB 3.0 HUB PCI Express Expansion Card Adapter 5Gbps for Motherboard.
  • With 9.5mm Length low profile bracket and standard bracket. Interface: Interface: Single-Lane (x1) PCI Express Gen2 Mode.
  • You need to install the NEC USB3.0 driver for your computer first.Compatible: USB1.1/2.0/3.0.
  • Operating Systems: Windows7/8/10(32/64bit) ..
  • Speed: Data Transfer rate of 1.5/12/480/5000 Mbps.Low Speed (1.5Mbps), Full Speed (12Mbps), High Speed (480Mbps), Super Speed (5Gpbs).
  • Power Input: SATA or IDE Power Connector.
Check Stock

32GB KingSpec 2.5-inch PATA/IDE SSD Solid State Disk (MLC Flash) SM2236 Controller

  • This adapter using JM20330 Serial ATA Bridge Chip..
  • 50mm (1.8 inches) MSATA Mini PCI-E SATA SSD to 2.5 inches Notebook IDE Adapter with case. ​.
  • Used with MSATA(Mini PCI-E SATA) SSD ONLY!.
Check Stock

Cable Matters 3-Pack 15 Pin SATA Power Splitter Cable 8 Inches

  • SATA Y cable splitter powers two Serial ATA HDD, SSD, optical drives, DVD burners, and PCI cards to a single connection on a computer power supply.
  • Snug-fitting drive connector and channel guides on the SATA power cables provide a secure connection that will not accidentally disconnect.
  • Upgrade cost saver SATA power cable spares the expense of upgrading an existing power supply to connect a new SATA drive.
  • Cost-effective 3 pack provides spare SATA extension power cables for new installations or repairs.
  • Keep a spare in your IT toolkit or at the test bench.
  • DIY or IT installers both appreciate the convenience of sharing a PSU connection when installing new internal components like a DVD burner.
  • 8 inch SATA power adapter cable (not including connectors) provides sufficient length for internal cable management in most configurations.
  • Heavy duty SATA splitter with 2 SATA 15 pin female connectors and 1 SATA 15 pin male is constructed with flexible 18 AWG conductors for reliable performance when connecting two SATA hard drives to a power supply.
  • The hard drive power cable supports 3.3V, 5V, and 12V power voltages between SATA I, II, III drives and power supply connections without any degradation of performance.
  • Compatible with popular SATA equipped devices suc....
Check Stock

Supermicro X7DA8 Intel 5000X Greencreek Extended ATX DDR2 ECC FB-DIMM Dual 771-pin LGA Sockets Motherboard

  • CPU: Dual 771-pin LGA Sockets Supports Intel 64-bit Dual-Core Xeon Processor 5000X sequence upto 3.73GHz.
  • Chipset: Intel 5000X (GreenCreek) chipset & MCH + PXH-V + ESB2.
  • Memory: 8x 240pin DDR2-667/533 DIMMs, Dual Branch Memory Bus, ECC/FB-DIMM, Upto 32GB.
Check Stock

Benfei 15 Pin SATA Power Y-Splitter Cable 8 Inches - 2 Pack

  • Y-SPLITTER SATA CABLE powers two Serial ATA HDD, SSD, optical drives, DVD burners, and PCI cards to a single connection on a computer power supply.
  • Snug-fitting drive SATA connector and channel guides on the power supply connector provide a secure connection that won¡¯t accidentally disconnect.
  • UPGRADE COST SAVER SATA power cable spares the expense of upgrading an existing power supply to connect a new SATA drive.
  • Cost-effective 2-Pack provides spare SATA extension power cables for new installations or repairs..
  • DIY or IT installers both appreciate the convenience of sharing a PSU connection when installing new internal components like a DVD burner.
  • 8 inch cable harness (not including connectors) provides sufficient length for internal cable management in most configurations.
  • HEAVY DUTY SPLITTER with 2 SATA 15 pin female connectors and 1 SATA 15 pin male is constructed with flexible 18 AWG conductors for reliable performance when connecting two SATA hard drives to a power supply.
  • Supports 3.3V, 5V, and 12V power voltages between SATA I, II, III drives and power supply connections without any degradation of performance.
  • COMPATIBLE with popular SATA equipped devices such as: Apricorn Velocity Solo x2 Extreme Performance SSD Upgrade Kit, Asus 24x DVD-RW S....
Check Stock

5 Slot M.2 B-Key SATA Base SSD PCI-e 3.0 x2 Bandwidth Expansion Card Require x16 Slot SI-PEX40142

  • Add four independent SATA-I ports to your PCI equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.（Note it is PCI card,NOT PCIE card )..
  • Plug the SATA RAID PCI card into the PCI slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length..
  • The card comes with an optional RAID utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports..
  • You can have one RAID 0 or 1 setup and two independent SATA drives two RAID 0 or 1 sets or a single RAID 0+1 set..
  • SIL3114 chipset and supports two modes: 32-bit at66MHZ and 64-bit at 133MHZ..
Check Stock