Reviews Pci Ide Adapter

CY Low Profile 4 Ports PCI-E to USB 3.0 HUB PCI Express Expansion Card Adapter 5Gbps for Motherboard

  • 4 Ports PCI-E to USB 3.0 HUB PCI Express Expansion Card Adapter 5Gbps for Motherboard.
  • With 9.5mm Length low profile bracket and standard bracket. Interface: Interface: Single-Lane (x1) PCI Express Gen2 Mode.
  • You need to install the NEC USB3.0 driver for your computer first.Compatible: USB1.1/2.0/3.0.
  • Operating Systems: Windows7/8/10(32/64bit) ..
  • Speed: Data Transfer rate of 1.5/12/480/5000 Mbps.Low Speed (1.5Mbps), Full Speed (12Mbps), High Speed (480Mbps), Super Speed (5Gpbs).
  • Power Input: SATA or IDE Power Connector.
Check Stock

Asus M4N68T-M V2 Socket AM3/ GeForce 7025/ DDR3/ A&V&GbE/ Micro ATX Motherboards

  • 4x SATA2 Ports, Support RAID 0, 1, 5, 10, JBOD.
  • Chipset: nVidia GeForce 7025/ nForce 630a.
  • CPU: Socket AM3 Support AMD Phenom II/ Athlon II/ Sempron 100 Series Processors.
  • Memory: 2x 240pin DDR3-1800(O.C.)/1600(O.C.)/1333/1066 DIMMs, Dual Channel, ECC/Non-ECC Un-buffered, Max Capacity upto 16GB.
Check Stock

VIA VT6421A 3-Port SATA Raid & IDE Controller PCI Card

  • VIA VT6421A SATA Raid Controller and IDE PCI Card General Features: VIA VT6421A chipset PCI interfac.
  • Supports three SATA and one PATA (IDE) hard disk drives Up to 150 Mbps data transfer rate.
  • Only SATA supports RAID Supports ATA 133 high performance hard disk drives.
  • Supports Ultra DMA mode 6/5/4/6/2/1/0 Supports DMA mode 2/1/0 Supports PIO mode 4/3/2/1/0.
Check Stock

USECL 2.5 Inch IDE to SATA Adapter,44 pin IDE HDD Laptop Hard Drive Female to 7+15 pin Male SATA Adapter,Convert Laptop IDE Hard Drive to SATA Port.

  • This is 22 Pin male SATA connector and 44-Pin standard female IDE connector adapter..
  • IDE to SATA Adapter. The 44-Pin IDE 2.5" HDD to SATA Adapter can allow you use your laptop 2.5" IDE hard disk as SATA disk. You can use your 2.5" IDE....
  • IDE SATA convert Adapter for up grading an old computer with 2.5 inch IDE HDD to a new 2.5 inch SATA HDD..
  • Great for computers that use 44 pin IDE connector and require an upgrade to new SATA 2.5 Inch Drives..
  • Dimensions: 2.72" x 0.55" x 0.69".ide to sata hard disk adapter Lightweight and easy to carry.easy to install ..
Check Stock

G41 Motherboard 771 Quad core E , L5420 Set , Supports 771 , 775 CPU Convert DDR3 1333 , 1066 Memory Motherboard 2.5G 4G 1333 Computer Mainboard with Mute Fan for Computer PC

  • DDR3 Computer Motherboard: 771 ,775 series CPU supports DDR3 1066 ,1333MHz memory computer motherboards , CPU socket LGA 771 processor specifications , high performance motherboards , making your experience stronger..
  • Rich Slots: Memory slot 2×DDR3 DIMM , 1×PCI E X16 graphics card slot , 1x PCI slot , 2x USB2.0 pins , 4xSATA2.0 interface , 1x IDE parallel port slot , I ,O interface (PS ,2 interface PS ,2 keyboard and mouse universal interface) , 1×RJ45 network interface , 1×COM parallel port , 1x PCI slot , 4xUSB 2.0 interface , 1 VGA..
  • IDE Discrete Graphics Motherboard with CPU Jumper: IDE parallel port , with independent graphics interface , equipped with integrated graphics , sound card , network card , and built in CPU jumper , even in life , you can use it easily..
  • Quad Core Four Thread Motherboard: Socket 771 interface type , quad core four thread computer motherboard , 12M cache , 4G 1333 with silent fan , high performance and easy to use..
  • Stable and Reliable: 21.1*17*6cm size motherboard (need to install a battery, the motherboard can work, battery model CR2023), stable and high-quality Xeon L/E5420 2.5G motherboard, suitable for computers..
Check Stock

SATA Card 8 Port, PCIE to SATA 3.0 Controller Expansion Board with Low Profile Bracket, SATA3.0 Interface Expansion Card for Windows 7/8/XP/10

  • 【PCI-E to SATA 3.0 expansion card】Use with SATA3.0 data cable for best results. with 8 x SATA3.0 interfaces expansion interface..
  • 【SATA Controller】Compatible with SATA6G, 3G and 1.5G hard drives. Fit for Windows 7/8 / XP / 10 Fit for Ubuntu support system, PCI-E 1X 2X 4X 8X 16X interface..
  • 【Serial ATA 3.0】Compliant with Serial ATA 3.0 specification, backward compatible with SATA2.0 SATA1.0.
  • PCI-Express v2.0 compatible, backward compatible with PCI-Express v1.0..
  • 【AHCI1.0 Mode and IDE Mode】Supports AHCI1.0 mode and IDE mode, native command queue (NCQ), FIS based on port multiplier switch or command switching, and hot plug..
  • 【6.0 Gbit/s / 3.0 Gbit/s / 1.5 Gbit/s Transmission】Supports communication speeds of 6.0 Gbit/s, 3.0 Gbit/s and 1.5 Gbit/s.
  • supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x and Gen 3i..
Check Stock

StarTech.com 3.5in Drive Bay IDE to Single CF SSD Adapter Card Reader 35BAYCF2IDE

  • Connect a CF card to a computer through an IDE connector.
  • Compatible with compact flash memory cards and desktop computers with an IDE slot.
  • Compact flash IDE adapter / CF to IDE adapter / CF to IDE converter / IDE to CF card reader.
  • Quick and driver free installation into any IDE 40 pin and 44 pin slot.
Check Stock

Xiwai Low Profile Half-Heigh mSATA SSD to 2.5 inch IDE 44pin Hard Disk Case Enclosure for Notebook Laptop

  • IDE to SATA Adapter. One Male SATA 7+15pin port convert to 2.5 inch Female PATA port (44-pin IDE) Adapter.
  • The product for up grading an old computer with 2.5 inch IDE HDD to a new 2.5 inch SATA HDD..
  • Adapter 44-Pin IDE 2.5" HDD to SATA Adapter can allow you use your laptop 2.5" IDE hard disk as SATA disk. You can use your 2.5" IDE hard disk in the laptop or desktop which have SATA connector..
  • Computers that use 44 pin IDE connector and require an upgrade to new SATA 2.5 Inch Drives. Improve the use of IDE hard disk..
  • Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Linux. Dimensions: 2.72" x 0.55" x 0.69"..
Check Stock

LWS 2.5 Inch IDE to SATA Adapter Convert Laptop 44 Pin Male IDE PATA HDD Hard Disk Drive SSD to a Serial ATA Port 。

  • IDE to SATA Adapter. One Male SATA 7+15pin port convert to 2.5 inch Female PATA port (44-pin IDE) Adapter.
  • The product for up grading an old computer with 2.5 inch IDE HDD to a new 2.5 inch SATA HDD..
  • Adapter 44-Pin IDE 2.5" HDD to SATA Adapter can allow you use your laptop 2.5" IDE hard disk as SATA disk. You can use your 2.5" IDE hard disk in the....
  • Computers that use 44 pin IDE connector and require an upgrade to new SATA 2.5 Inch Drives. Improve the use of IDE hard disk..
  • Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Linux. Dimensions: 2.72" x 0.55" x 0.69"..
Check Stock

AGPtek SATA/PATA/IDE Drive to USB 2.0 Adapter Converter Cable for Hard Drive Disk HDD 2.5" 3.5", Compatible with USB 1.1/2.0/3.0, with External AC Power Adapter Included

  • ◆ USB 2.0 to 2.5" 3.5" IDE SATA HDD Hard Drive Converter Adapter Cable + AC Power Adapter, Supports SATA Hard Disk / ATA/ATAPI CD-ROM/R/RW DVD-ROM (based on ATAPI spec.) External power adapter included, for power up the 5V/12V IDE/ATAPI devices usage..
  • ◆Use your 2.5" / 3.5" IDE hard drive or SATA hard disc as an external hard drive. Connect your ide to usb adapter to your computer through a USB port. 480 MB/s high speed transfer rate (USB 2.0 specification), limit depend on the IDE device/SATA device and the driver..
  • ◆ Connect to the IDE device using USB interface and SATA device too. USB 2.0 standard, 480M bps full speed..
  • ◆ AGPtEK sata to usb adapter can be easily connected to the IDE device / SATA device and make the hard disk device more portable..
  • ◆ This usb sata ide adapter is easy to use and plug & play, no drivers needed..
Check Stock