Reviews Passive Infrared Sensor

Sensky BS009 12V 24V PIR Sensor LED Motion Sensor Switch Motion Timer Function Sign Control PIR Controller LED Strips Lighting

  • Delay Time: 1-10 min(adjustable). Induction distance: 8m.
  • Infrared detection controller, adopt infrared detection way to control load switch.
  • The sensor switch activates On when a body in motion enters the field of view with an On time hold that is adjustable from 1 to 10 minutes after motion has ceased.
  • PIR (Passive Infrared) sensor has an effective range of 16 feet and diminished sensing of a moving human body to 26 feet. The field of view of the PIR Dome Lens is 60 degrees nominal..
Check Stock

Ademco 997 Ceiling-Mount PIR Motion Detector

  • CEILING OCCUPANCY SENSOR uses passive infrared technology, PIR motion sensor to automatically turn ON/OFF lights. This motion sensor features a bright LED indicator when the sensor senses motion..
  • OCCUPANCY SENSOR Two interchangeable Fresnel lenses for perfect detection based on application needs. This allows the sensor to cover any ceiling height from 8 feet to 50 feet..
  • EASY INSTALLATION This ceiling motion detector only requires a 1/2 inch knockout cutting material costs and installation time..
  • MULTI-LEVEL, 360 degree interchangeable lens. Compatible with LED, incandescent, CFL lighting. Easy adjustable sensitivity control via DIP switch. Adjustable sensitivity 50%-100%..
  • LARGE SENSOR RANGE Up to 2800 sq. ft coverage, 360 degree field view, Operating temperature (32 – 131°F), 120VAC 0 - 800W Ballast or Tungsten, UL-Listed, 1-year warranty..
Check Stock

MEGA 2560 Starter Kit Ultra (100% Arduino IDE Compatible) w/ Battery Holder, Sensors, Modules, Resistor kit and Components (no Supply)

  • ...nsor -Tilt detector module -Servo SG90 motor -Stepper motor (5V) -Motor driver module for stepper motor ULN2003.
  • 5V Active Buzzer -5V Passive Buzzer -LCD 1602 16 characters * 2 lines -LED Display Driver MAX7219 -LED Matrix Display of 8*8 -7 Segments Display 1 digit -7 Segments Display 4 digits -Simple Relay Module - Infrared Remote Control 38kHz - 38kHz Infrared decoder receiver (type 1838) - Infrared phototransistor (Flame sensor) - Infrared LED - Light sensor (Photoresistor).
  • -10 * LEDs 5mm Diffused RED -10 * LEDs 5mm Diffused GREEN -10 * LEDs 5mm Diffused YELLOW -5 * LEDs 5mm Ultrabright WHITE diffused -3 * LEDs 5mm Red / Green / Blue Diffused RGB -Shift Register (Series to Parallel IC) 74HC595 - NPN Transistor BC547 - PNP Transistor BC557 - Adjustable Knob Resistor 1kOhm (Potentiometer) - Adjustable Knob Resistor 10kOhm (Potentiometer).
  • - Resistor Pack 1/4W 1% accuracy, with 10pz of each value: 100, 220, 330, 470, 1K, 2K2, 4k7, 10K, 22K, 47K, 100K, 220K, 1M - 40-pin header 2.54 mm -40-pin header at right angle 2.54mm -5 * Capacitors for bypass tantalum 0.1uF -5 * Jumpers for header.
Check Stock

Chamberlain Group Chamberlain Security Wireless Motion Alert System, Black (CWA2000)

  • Set includes one base receiver and one sensor (ability to additional CWPIR sensors-Sold Separately).
  • Passive infrared (PIR) sensor is weatherproof and detects motion up to 30ft away and features adjustable sensitivity.
  • Easy to install, no wiring required. Base units uses AA batteries or included AC adapter.
  • Base receiver detects signals from sensors up to a 1/2 mile away (in ideal situations).
  • Unique sound and light pattern on the base unit identifies which sensor has been triggered.
  • NOTE: Check User Manual in Technical Specification before use.
Check Stock

Mini Motion/Daylight Ceiling Sensor-DIM Kit

  • Combines passive infrared and ultrasonic technology providing the most accurate motion ceiling sensor possible. The ultrasonic sensor can defect fine movements such as typing, and flipping book pages.
  • The ceiling sensor is designed to be mounted about 8-10 feet off the ground. The implementation of two sensing technologies in each unit helps to avoid false triggering while still accurately sensing motion.
  • 6 different trigger modes that use a combination of both PIR and ultrasonic sensor. Has adjustable time delays via dip switch (5 sec - 30 min).
  • Multi-level Coverage, up to 1, 600 ft² PIR coverage and up to 1000 ft² ultrasonic coverage.
  • UL/ CUL Listed. Operating temperature (32 – 131°F).
  • California Title 20 and 24 compliant. 120/277 VAC, 1/4HP-120VAC.
Check Stock

Tangxi Motion Sensor Alarm, Wireless PIR Motion Sensor Detector Security Alarm System for Home Garage, 105dB Infrared Motion Alarm with Remote Control

  • Passive infrared sensor is an electronic sensor that can measure infrared (IR) light emitted by an object in its field of view. They are most commonly used in pirg-based motion detectors..
  • This motion sensor alarm is ideal to protect your property from unwelcome intruders. It can cover front doors, back doors, garages, sheds, outbuildings, etc., and can also be used for caravans and RVs..
  • It has a built-in PIR motion sensor, if any motion is detected, an alarm will be activated. No wire connection is needed, just put the required batteries in (no need for 4 AA)..
  • The detection range is about 7-10 meters, equipped with 2 remote controls for on/off. You can fix it on a suitable surface and use a provided remote control to open it..
  • The product has stronger anti-interference, lower power consumption, longer service life, easy to install, with a wall-mounted mounting bracket, with a rotating ball or keyhole for hanging..
Check Stock

Nightfall In Middle Earth (remixed & Remastered)

  • ...e battery light night can last up to 180 days when choosing Auto+Medium Mode. It's with a magnetic strip for mounting in addition to double-sided 3M adhesive pads for places with limited electricity access. As it can stand on any flat surfaces, you could place it wherever you love for lighting the way..
  • Passive Infrared Technology. It uses an expensive passive infrared motion sensor to detect movement within 3-5 meters for automatic turn-on, and will automatically turn off after 20 seconds of no movement..
  • 5 Useful Modes. 2 Brightness Modes and 3 Lighting Modes are included for a nightlight. You can choose the desired brightness from the high or medium by simply pressing a button on the top of it while choosing lighting modes from AUTO, ON or OFF for different occasions and provide you the best using experience..
  • What You Receive: 2* AUVON Night Lights, 1* USB Cable,1* User Manual, up to 24 Month Warranty and Lifetime Technicalm Support..
Check Stock

QWORK Motion Sensor Switch, 110-220V PIR High Sensitive Waterproof Wall Sensor Light Switch for Outdoor&Indoor, 49-98FT Detection Distance

  • About Detection Distance: In low temperature seasons, such as autumn, winter, and spring, the detection distance can reach 98FT. In the hot summer, high heat will slightly affect infrared sensing, and the detection distance can reach up to 49FT.
  • Excellent Infrared sensor: Adopting industry-leading passive infrared technology, uses infrared signals to detect moving objects, not generate a lot of heat and save energy without wasting electricity.
  • Time-delay Adjustable: Adjustable time delay is 7sec-8sec, which can be set according to user’s needs.
  • Wide Application: Widely used in shops, garages, corridors, laundry rooms, stairs, basements and other places.
  • 100% Satisfied Service:Enjoy a smooth&worry-free return service within a month. And any questions feel free to conatct us, we will be here for you..
Check Stock

ENERLITES High Bay 360 Degree Passive Infrared (PIR) Ceiling Occupancy Motion Sensor, 1200-2800 sq. ft. Coverage, 120-277VAC, Commercial/Industrial Grade, MPC-50H, 8 Pack

  • CEILING OCCUPANCY SENSOR uses passive infrared technology, PIR motion sensor to automatically turn ON/OFF lights. This motion sensor features a bright LED indicator when the sensor senses motion..
  • OCCUPANCY SENSOR Two interchangeable Fresnel lenses for perfect detection based on application needs. This allows the sensor to cover any ceiling height from 8 feet to 50 feet..
  • EASY INSTALLATION This ceiling motion detector only requires a 1/2 inch knockout cutting material costs and installation time..
  • MULTI-LEVEL, 360 degree interchangeable lens. Compatible with LED, incandescent, CFL lighting. Easy adjustable sensitivity control via DIP switch. Adjustable sensitivity 50%-100%..
  • LARGE SENSOR RANGE Up to 2800 sq. ft coverage, 360 degree field view, Operating temperature (32 – 131°F), 120VAC 0 - 800W Ballast or Tungsten, UL-Listed. 1-Year Warranty.
Check Stock

Hubbell WSPSM24V Flourescent HighBay Occupancy Sensor, WASP2, Surface Mt, 24V, No Lens

  • Hubbell WASP2 Digital Passive infrared Occupancy Sensor.
  • Interchangeable Lens Options Depending On Coverage Needed (SOLD SEPARATELY).
Check Stock