Reviews Passenger Car Tire Valve

OTAUPRS 4 Pcs PVR32 Bolt-in Tubeless Tire Valve Stems Fit 0.453 Inch Rim Holes 90 Degree

  • 【HIGH QUALITY】:The Tire Valve stem are constructed of high temperature brass valve cores and ozone resistant EPDM rubber,100% Ozone tested and leak tested, improve the safety of your vehicle..
  • 【FITMENT】:The Brass Snap-in valve stem is standard diameter and is suitable for any passenger car, Light Trucks, Small Trailers, wheelbarrows, Lawn mowers, ATVs, and Motorcycles.
  • 【SPECIFICATION】:Premium EPDM Rubber&Brass Snap-in TPMS valve stem,Rim Hole Diameter in wheel:0.453inches(11.5mm).100 PSI maximum inflation pressure,Package:8PCS TR412 tire valve stem.
  • 【Easy to install】: With a bolted in design, this rubber tire stem is easy and convenient to install, keeping the tire inflated at a constant pressure level and allowing quick check of PSI.
  • 【GOOD After-sales Service】:Please feel free to contact us if you have any question with the tire valve stem,90 days free return or refund..
Check Stock

HZJD 25PCS Tire Valve Caps, with O Rubber Ring, Universal Stem Covers for SUVs, Cars, Bike, Motorcycles, Trucks | Heavy-Duty, Airtight Seal | Screw-On, Easy to Operation (Black)

  • ?? CORROSION RESISTANT DESIGN - The tire valve stem caps come with heavy-duty aluminum alloy and plastic liner, which will protect the valve stem from corrosion caused by direct contact with clay, water, and snow, special in wet or cold areas..
  • PREMIUM MATERIAL - Aquaok valve stem caps are made of high-quality anodized aluminum alloy and built plastic insert which comes with a One-piece sealing ring inside. Prevent tire burst and ensure stable tire pressure. Make your drive safer..
  • ?? WIDE COMPATIBILITY - The inner diameter of tire air caps is 7mm/0.31inch, and the inner height is 13.9mm/0.54inch. Our air caps for tires are compatible with all American standard Schrader valve stem. Include cars, SUVs, trucks, RVs, bikes, etc..
  • ?? EASY to INSTALL - With the simple and smooth horizontal stripes design, Aquaok car tire caps are easily hand tightened or taken off..
  • ?? PERFECT GIFT CHOICE - You will get 8 pieces of Aquaok valve stem caps in one package. It's a fashionable and durable gift to friends, bosses, family members, etc..
  • Compatible with vehicle type: Passenger Car.
Check Stock

CDWTPS TR415 Tire Valve Stem, Rubber Snap-in Short Black Tire Valve Stem for Tubeless 0.453 Inch 11.5mm Rim Holes on Standard Vehicle Tires(8pcs/Bag)

  • 【HIGH QUALITY】:The Tire Valve stem are constructed of high temperature brass valve cores and ozone resistant EPDM rubber,100% Ozone tested and leak tested, improve the safety of your vehicle..
  • 【FITMENT】:The Brass Snap-in valve stem is standard diameter and is suitable for any passenger car, Light Trucks, Small Trailers, wheelbarrows, Lawn mowers, ATVs, and Motorcycles.
  • 【SPECIFICATION】:Premium EPDM Rubber&Brass Snap-in TPMS valve stem,Rim Hole Diameter in wheel:0.625inches(16mm).100 PSI maximum inflation pressure,Package:8PCS TR415 tire valve stem.
  • 【Easy to install】: With a bolted in design, this rubber tire stem is easy and convenient to install, keeping the tire inflated at a constant pressure level and allowing quick check of PSI.
  • 【GOOD After-sales Service】:Please feel free to contact us if you have any question with the tire valve stem,90 days free return or refund..
Check Stock

Swpeet 65Pcs Tire Valve Stem Tool Remover & Installation Set, Valve Caps Snap-in Valve Stems with Valve Stem Cores, Single and Dual Head Tire Valve Core Remover Tool, 4-Way Valve Tool for Most Cars

  • ...ality Valve Stem Puller】Valve Stem Puller - For installation or removal of snap in type tubeless tire valves, Pull out the old valve stems and re-install the new valve stems, No need to worry scratching wheels or destroying valve stems..
  • 【2 in 1 Slotted-Head Valve Caps】Suitable for repair of tubeless tires for passenger cars, truck, bicycle,motorcycles, ATVs, electric cars, off-road vehicles and trucks. Fit for all standard valve cores. The top slot head can be used to remove valve cores and the bottom can be used as tire caps to prevent air leaking and dust..
Check Stock

HIYITKS Air Chuck with Clip Adapter, Brass Locking Tire Inflator Nozzle Adapter Connect, No Leakage 250 PSI Tire Chucks for Vehicle Inflator Compressor Pump ConnectTool

  • ️[ No Leakage & High Efficiency ]: Just press down locking clip on tire inflator, push or twist HIYITKS tire air chuck into the valve stem until it is clamped, release the lock clip, no other tool is required, very practical and convenient. The tire inflator chuck gives you a great seal on the tire valve, it is great Air tire inflator nozzle Hose Adapter accessory..
  • [ Premium HIYITKS Tire Air Chuck With Clip Adapter ]: Each air chuck is made of heavy duty solid brass for higher strength and durability. High quality material also has excellent anti-corrosion, wear resistance yet the maximum pressure is up to 250 PSI..
  • [ Universal Fitment ]: 8mm end makes it the perfect choice for hose repairs, compatible with 8mm bore hose, Inflator Air nozzle fit for a host of vehicle tire inflator tire pump adapter , like bike, motorcycle, truck,car tire fill etc..
  • ️[ Precise Design ]: It’s well-made design with clean smooth surface, tire inflator chuck fitted for passenger and truck tire valves. Can fix regular fast connector to inflate..
  • ️[ Easy To Operate ]: Plugs open flow HIYITKS air chuck into the hose and hooks it to the valve stem. It's easy to depress and strong enough to stay in place..
Check Stock

Magnum+ Tire Balancing Beads 10.5 OZ Set of 4 Bags, TPMS Compatible

  • ELIMINATE VIBRATIONS caused by any heavy spots, promote CONSISTENT TREAD WEAR and longevity of the tire, IMPROVE GAS MILEAGE. Important: Remove outer bag before tossing into tire..
  • TPMS COMPATIBLE – Magnum balance beads for tires are big enough to never obstruct a valve core. No special valve core required..
  • MADE OF 100% TEMPERED GLASS. It does not break, disintegrate, absorb moisture, freeze or stick together..
  • UNIVERSAL – There’s not a single balancing job that can’t be done with MAGNUM+, no matter the size or type of tire – commercial truck, SUV, van, passenger car, ATV, and off-road tires, for summer and winter- you can trust the original internal balancing bead brand that’s been on the market for more than 25 years..
  • IN THE BOX – 4 individually packaged 10.5oz bags of Magnum+ balance beads for tires...
Check Stock

CARPDR Tire Air Chuck with Clip Adapter Heavy Duty 8mm Clip on Tire Chuck Brass Locking Tire Chuck No Leakage Air Inflator Adapter Accessories for Inflator Compressor Pump Connect Accessories - 2Pack

  • 【Premium Tire Chuck Clip】Each air chuck is made of heavy duty solid brass for higher strength and durability. High quality material also has excellent anti-corrosion, wear resistance yet the maximum pressure is up to 250 PSI..
  • 【No Leakage & High Efficiency】Just press down locking clip, push or twist the air chuck into the valve stem until it is clamped, release the lock clip, no other tool is required, very practical and convenient. The tire inflator tire chuck gives you a great seal on the tire valve, it is great Air Inflator Hose Adapter accessory..
  • 【Universal Fitment】8mm end makes it the perfect choice for hose repairs, compatible with 8mm bore hose, fit for a host of vehicle tire inflator, like bike, motorcycle, car tire fill etc..
  • 【Easy To Operate】Plugs open flow air chuck into the hose and hooks it to the valve stem. It's easy to depress and strong enough to stay in place..
  • 【Precise Design】It’s well-made design with clean smooth surface, tire inflator chuck fitted for passenger and truck tire valves. Can fix regular fast connector to inflate..
Check Stock

CARPDR Tire Air Chuck with Clip Adapter Heavy Duty 8mm Clip on Tire Chuck Brass Locking Tire Chuck No Leakage Air Inflator Adapter Accessories for Inflator Compressor Pump Connect Accessories - 1Pc

  • 【Premium Tire Chuck Clip】Each air chuck is made of heavy duty solid brass for higher strength and durability. High quality material also has excellent anti-corrosion, wear resistance yet the maximum pressure is up to 250 PSI..
  • 【No Leakage & High Efficiency】Just press down locking clip, push or twist the air chuck into the valve stem until it is clamped, release the lock clip, no other tool is required, very practical and convenient. The tire inflator tire chuck gives you a great seal on the tire valve, it is great Air Inflator Hose Adapter accessory..
  • 【Universal Fitment】8mm end makes it the perfect choice for hose repairs, compatible with 8mm bore hose, fit for a host of vehicle tire inflator, like bike, motorcycle, car tire fill etc..
  • 【Easy To Operate】Plugs open flow air chuck into the hose and hooks it to the valve stem. It's easy to depress and strong enough to stay in place..
  • 【Precise Design】It’s well-made design with clean smooth surface, tire inflator chuck fitted for passenger and truck tire valves. Can fix regular fast connector to inflate..
Check Stock

Fluorescent Car Tire Valve Stem Caps, 16Pcs Universal Luminous Tire Air Valves Stem Caps, Glow in The Dark Tire Valves Caps for Most Cars, Motorcycles, SUV, Trucks, and Bicycles（Green

  • 【Fluorescent Car Tire Valve Cap】Glowing in the dark,The fluorescent car tire valve caps features illuminated plastic inserts and clear housing protection to prevent valve stem corrosion. Tire valves caps inside with the Rubber Seals，create a tighter, more effective seal, so there’s no air leaking on long, tough drives. While protecting the tire valve core from mud, dust, ash and rain..
  • 【FLUORESCENT TIRE VALVE STEM】The inner layer of the valve stem cover is designed with luminous material, which can make the car decorated with tire valve stem cover lights at night. When your wheel starts to move, it will automatically flash and form a circle of light, making your car/motorbike/bike look beautiful..
  • 【DURABLE MATERIAL】Car tire valve stem cover does not interfere with tire pressure monitoring system. 16Pcs luminous valve stem caps are made of upgraded ABS material, durable and very hard, won't break or corrode, won't fade, helps keep tires inflated in good condition..
  • 【EASY INSTALLATION】Easy installation without tools.The inner protection tire valve stem cover is designed with a swivel thread for e....
Check Stock

Mudder 2 Pieces 8.25 Inch Tire Valve Extension,Flexible Tire Valve Adaptor and 2 Pieces 90 Degree Tyre Valve Extension Adaptor for Universal Rv Cars Truck Motorcycle Bike Scooter

  • Package include: you will get 4 pieces tire valve extension adaptors in your package, 2 pieces rubber tire valve adapter and 2 pieces 90 degree brass....
  • Rubber extension adaptor: it is made of durable rubber with metallic valve end, the length of tire valve extension is approx. 210 mm/ 8.25 inch.
  • Brass tire valve extension adapter: the tire valve extension adaptor is made of brass and comes with metal dust cap, strong and long lasting, the....
  • How to use: rubber adaptor: one end can be connected on valve stem and the other end can be taken as replacement of the original valve stem.
  • Multiple usage: valve stem extension fit all passenger cars, light and heavy trucks, motorcycles and recreational vehicles with standard tire valves,....
Check Stock