Reviews Parental Pin Reset

Treedix ATmega328P CH340 Development Board Compatible with Arduino UNO R3 Board Kit for Starter with Cable

  • The board is a microcontroller board based on the CH340. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button..
  • This is compatible board with an Atmega328p and a CH340G serial converter, 100% Compatible with Arduino UNO R3..
  • This board has the following new features: 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible with both the board that uses the AVR, which operates with 5V and with the Due that operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes. Stronger RESET circuit..
  • Friendly: the board is easy to use for Arduino starter, It contains everything needed to support the microcontroller.
  • simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started..
  • We strive to put our hundred percent to meet your requirements and try our best to achieve your satisfaction!.
Check Stock

Sony PlayStation 3 Super Slim 250 GBPS3 Console System (Renewed)

  • Internet ready with built-in Wi-Fi . To reset the device insert a small pin to the reset button and hold own for 5 seconds..
  • ncludes Wireless Controller (color of controller varies) and power source. To reset the console, Continue to hold the power button and you will hear a second beep, indicating the video reset. Keep holding the power button down until you hear a third beep. The console will power off afterwards. Activate the Safe Mode feature and select 'restore file system'..
  • High-Definition Blu-ray player for the best movie experience. Plays DVDs and CDs.
  • 250GB HDD for storing games, music, videos, and photos.
Check Stock

ELEGOO MEGA R3 Board ATmega 2560 + USB Cable Compatible with Arduino IDE Projects RoHS Compliant

  • The Mega is 100% compatible with Arduino IDE and most shields designed for the Arduino mega R3，RoHS Compliant.
  • The chip is Atmega+2560-16au and 16u2, same with the official version..
  • Improved and expert version: 1. 0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Due that operate with 3. 3V. The second one is a not connected pin, that is reserved for future purposes..
  • Stronger RESET circuit. Use 5. 5 * 2. 1mm DC barrel jack (compatible with 5. 5 * 2. 5mm DC barrel jack).
  • It contains everything needed to support the microcontroller.
  • simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started..
Check Stock

Electro Faustus Blackfly Modular Spring Activated Instrument Eurorack Module

  • DS3231 16-pin memory chips - AT24C32 ,extremely accurate I2C real-time clock (RTC), with an integrated temperature-compensated crystal oscillator (TCXO) and crystal..
  • Integrated oscillator improve long-term accuracy of the device and reduces the number of components of the production line..
  • Provides two configurable alarm clock and a calendar can be set to a square wave output. Address and data are transferred serially through an I2C bidirectional bus..
  • Highly accurate RTC completely manages all timekeeping functions.The device incorporates a battery input, disconnect the main power supply and maintains accurate timekeeping..
  • A precision temperature-compensated voltage reference and comparator circuit monitors the status of VCC to detect power failures, provide a reset output. In addition, RST pin is monitored as generating a μP reset..
Check Stock

ANCEL HD3500 Pickup Truck OBD2 Scanner with Bidirectional/Service Reset, All Systems Diesel Diagnostic Tool Light Truck & Car 2 in 1 Code Reader for Ford/Dodge/Chevy/GMC/Toyota/Honda/Nissan/Isuzu

  • 【Designed for Small & Medium trucks】Ancel HD3500 pickup truck scanner can read/clear codes, graph live data, retrieve ECU information, D-P-F functions, service reset, active test, etc. Works with Passenger Vehicles (including pickup trucks,light trucks and mini vans ) on the North America market.brands include Ford, Dodge Ram, Chevrolet, GMC, Toyota, Honda, Nissan, Isuzu.
  • powerstroke engine/ duramx diesel engine, ect..
  • 【Full DPF Functions】This diesel scan tool provides you with Fulll DPF functions, including active(auto) regeneration, passive regeneration, DPF/DPD Regeneration, DPF reset, DPF/DP parameter reset, DPF Regeneration Suspension, DPF Replacement, DPF Pressure Sensor Learn/Reset, DPF/Catalyst 2 Reset etc. The HD3500 diesel diagnostic tool comes with OEM level DPF functionality, saving you the cost of purchasing a DPF..
  • 【Service Reset & Bidirectional/Active Test】HD3500 pickup truck diagnostic scanner can provide special functions and active test, such as Oil Reset, Brake Reset, ABS Bleeding, Injector reset, SAS Reset, TPMS Reset, BMS Reset, ETS Reset, AFS Reset, EGR Reset and more depending on make & model! Note: Please send VIN number(s) of the vehicle(s) to us, if you are not sure whether this scanner is compatible with your ....
Check Stock

HESTYA 2 Packs Charging Port Replacement 3 Prong Smart Self-Balancing Charging Port Replacement Compatible with Hoverboard Scooter Swegway Swagtron Swagboard CHO

  • What you will get: you will get 2 pieces scooter charging interface, 2 pieces reset switch, 2 pieces waterproof cover, 2 pieces nut accessories.
  • GX12-4 line charging port: charging cable with 3-pin male charger port, 4-pin white plug, it is approx. 9 inch/ 24 cm in length.
  • Quality material: charging port replacement wires are made of copper core, which can reduce charging loss, has good conductivity and low resistance.
  • Easy to install: charging port replacement (3 prong) is very simple to operate, very convenient and quick to install, which can save operating time.
  • Wide application: suitable for 12V/ 24V/ 36V/ 48V scooter, compatible with Swegway, Swagtron, Swagboard, CHO and so on.
Check Stock

Airbag Scan/Reset Tool B800 for BMW Fit E36 E46 E34 E38 E39 Z3 Z4 X5

  • B800 Airbag Scan/Reset Tool work for BMW between 1994 and 2003, This is a very easy to use tool that comes with instruction manual to help you diagnose problems..
  • Models available for most BMWs built between 1994 and 2003 - Displays all SRS fault codes, tells you what's wrong..
  • SRS airbag light reset tool for BMW,Reset the dashboard SRS airbag light within seconds..
  • Note: B800 can not work for 2001 BMW 330i..
  • Package contents: 1 x B800 SRS Scanner And Resetter Tool for BMW(DCVS2745YL/DE) 1 x OBD-II to 20 Pin Adapter Cable 1 x Instruction Manual..
Check Stock

Zarker XD35 3-Digit Combination Padlock, Pink, 1-Pack

  • The logo on the left epoxy sticker on the front of the lock has been changed to an engraved logo. We have upgraded the epoxy logo sticker to the engraved logo to compensate for its weak adhesion if used for a long time..
  • Security of the dial lock : 1,000 combinations of locking mechanisms are provided to ensure safety. Most of the locks can be easily opened with an internal structure with only one security pin under the dial, but ZARKER applies 4 security pins to provide protection and security from theft..
  • Combination reset function: Vertically-aligned combination setting allows for convenient use even in a narrow space. Vertically-aligned 3-digit reset : The design of a vertically-aligned 3-digit reset makes both setting and resetting with a desired combination easy, so an additional tool is not needed to change the combination..
  • Wide range of use: It is ideal to use for simple purposes such as school lockers, sports lockers, cabinet lockers, fences, and tool boxes..
  • Materials : Zinc alloy and plated steel keep your belongings safe with durability..
Check Stock

FOXWELL Car Full-System Diagnostic Tool NT510 Elite for BMW with EVA Case and 20Pin Adapter

  • ...dy, chassis, powertrain and all control modules check. As a professional diagnostic scan tool for bmw full systems, nt510 elite codes reader is also a universal OBD code reader for checking engine light, reading and erasing codes on all brands cars' OBD system..
  • ADVANCED FEATURES FOR BMW ➤ Control service interval reset, brake deactivation, ABS activation, battery registration, abs bleeding, reset oil light service/engage points for transfer case, idle speed adjustment, traction/throttle body adjustment, troubleshoot A/C, reset CBS condition-based service, turn up brightness on ur lights, activate alarm, dvd are just a few of special functions this bmw diagnostic scanner provides. One nt510elite code reader is enough for professional car diagnosis..
Check Stock

iCarsoft Auto Diagnostic Scan Tool B800 V2.0 Auto Diagnostic Scanner for BMW and Mini with ABS Scan,Oil Reset, ABS Bleeding, Injector Coding etc

  • B800 V2.0 can work on BMW between 1997-2018. For 1997-2000 BMW, you need to purchase iCarsoft BMW 20 pin cable for conversion.
  • B800 V2.0 can do it all-reads and clears trouble codes for BMW Mini on all the systems such as engine, transmission, ABS and SRS etc. Support OBD II/EOBD ten modes of operation full ecu diagnosis Support data review and print, support battery voltage test OBD II function for all OBD II/EOBD compliant vehicles: I/M Readiness, Data Stream, Freeze Frame, O2 Sensor Test, Turn off Check Engine Light (MIL)… Lifetime free update Full Speed upgrade via PC one year warranty Support Multi-language.
  • Oil light/service reset, EPB reset, Steering Angle Sensor (SAS) Calibration, Diesel Particulate Filter (DPF) Regeneration Control System, Electronic Throttle Control system (ETC) reset, Battery Management System (BMS) reset.
  • NEW FUNCTIONS: ABS Bleeding and Injector coding (some vehicle models do not enjoy the two functions) ABS Bleeding, release the air to restore ABS Brake sensitivity, or relearn while ABS replaced. Injector coding, relearn the injector control parameter while the injector renewed or replaced.
Check Stock