Reviews Parametric Design - BestBuyersPro.com

Sound Equalizer by Swank

The CT-7EQ is a 7 band 1/2 din parametric car audio equalizer designed to divide and enhance the segment of frequency for your car audio application.
Car audio equalizer featuring 7 bands that divide 20Hz - 20kHz into 7 segments.
Parametric Equalizer : 50Hz, 125Hz, 315Hz, 750Hz, 2.2KHz, 12KHz.
Included with the car equalizer are installation brackets and hardware.

High-voltage Class A 12AX7 vacuum-tube mic/instrument Preamplifier.
Gain, tube drive, HP filter, -20 dB pad, Phantom power, polarity reverse3-band EQ features variable-q on mid-band w/ peak/shelving on high- and low-bands.
Variable VCA compressor with auto attack/release and soft/hard Knee.
3-Band EQ with parametric mid and semi-parametric, shelving/peak low and high bands.
1U 19” rack-mountable, rugged steel chassis.

The CT-7EQ is a 7 band 1/2 din parametric car audio equalizer designed to divide and enhance the segment of frequency for your car audio application.
Car audio equalizer featuring 7 bands that divide 20Hz - 20kHz into 7 segments.
Parametric Equalizer : 50Hz, 125Hz, 315Hz, 750Hz, 2.2KHz, 12KHz.
Included with the car equalizer are installation brackets and hardware.

The EX 3000 is an equalizer with three bands: BASS, MID BASS, MID HIGH beyond traditional resources Level, High Pass and Low Pass..
Frequency response of 10Hz to 10KHz and Cooler controlled intelligent system.
The Digital Signal Processor DSP 2.8 X features crossover: Input Channels: 2 / Output Channels: 8.
Graphic Equalizer: 15 Band / Graphic Equalizer Presets: 12.
Parametric Equalizer Input:1 / Parametric Equalizer Output: 8 / 1 per Channel.

...ay system with a bandpass on the mid-range or Mid-bass..
ALL IN 1: Separate bass level control to balance the bass output to the rest of the system. Fader control - to balance front output to rear output, or midrange or mid-bass to the highs. Auxiliary input for your iPod or other portable source. Five bands of semi-parametric equalization. Each of the five bands has a variable center frequency so you can fix. Individual channel gains for both Main-in and Auxiliary-in. 9.5 Volts of preamp output to make your amps sound their very best..
SPECIFICATIONS: 1/2 Din, Dash Mounted, Equalizer/Crossover 9.5 Volts Preamp Output, 5 Bands of Parametric Equalization, Crossover 2/3-Way or 3-Way w/Band Pass.

Features: 400W total power RMS rating of 200W x 2 @ 4 ohms, 2 channels driven for robust audio..
Sonance Advanced Room Correction (SonARC) Provides a 10-band parametric EQ to optimize sonic performance in any space..
8 ohms impedance Efficiently conducts power..
Class D design Combines efficiency with fidelity for high-powered operation..
What's Included: Rack ears, Sonance Sonamp 400W 2.0-Ch. DSP Power Amplifier.

Parametric cushioned 5Gen midsole for added comfort.
Ortholite comfort foam insole layer adds long-term cushioning and high-level breathability with 5% recycled rubber content.
Breathable athletic engineered mesh upper.

Four Independent Outputs: The DSP 2.4X features 2 audio inputs (A and B) and 4 independent outputs and allows you to choose the audio source (A, B or A + B) for each output.
Intuitive Interface: Through an LCD display (16x2 Characters) and intuitive interface, it allows real-time audio adjustments.
Professional Equalization: For professional equalization adjustments, it has 1 INPUT Parametric Equalizer and 1 OUTPUT Parametric Equalizer with gain control, specific frequency setting, and equalizer bandwidth, allowing fine adjustments and detailed equalization control.
Integrated Equalization System: With 15 band graphic equalizer, manual tuning, or through 12 presets (Flat, Loudness, Bass Boost, Mid Bass, Treble Boost, Powerful, Electronic, Rock, Hip Hop, Pop, Vocal and Pancadão).
Sequencer Feature: This 4 channel DSP allows sequential triggering of other products through the remote trigger connection (REM) with three outputs (S1, S2, and S3) which are sequentially activated and deactivated according to the input signal from the remote input (REM IN).

INTUITIVE INTERFACE: Through an LCD display (16x2 Characters) and intuitive interface, it allows real-time audio adjustments.
HANDLES IT ALL: The DSP2.8X features 2 audio inputs (A and B) and 8 independent outputs and allows you to choose the audio source (A, B or A + B) for each output.
INTEGRATED EQUALIZATION SYSTEM: With 15 band graphic equalizer, manual tuning, or through 12 presets (Flat, Loudness, Bass Boost, Mid Bass, Treble Boost, Powerful, Electronic, Rock, Hip Hop, Pop, Vocal and Pancadão).
PROFESSIONAL EQUALIZATION: For professional equalization adjustments, it has 1 INPUT Parametric Equalizer and 1 OUTPUT Parametric Equalizer with gain control, specific frequency setting, and equalizer bandwidth, allowing fine adjustments and detailed equalization control.
SEQUENCER FEATURE: The PRV DSP2.8x allows sequential triggering of other products through the remote trigger connection (REM) with three outputs (S1, S2, and S3) which are sequentially activated and deactivated according to the input signal from the remote input (REM IN).