Reviews Pan Tilt Servo Motor Kit For Pixys
BETOPPER Stage Lights, 36x3W LED Wash Lights RGBW, DMX/Sound Activated DJ Lights, Moving Head Lights for DJ Show, Bar, KTV, Disco, Party Lighting (2 Packs)
- ...W Stage Lights:The stage lights consist of 36pcs 3W led lamps, 8 reds, 10 greens, 10 blues, 8 whites. It is bright and the lighting range can be 6 meters. The light beam angle is 15 degree. It can be used as stage lights, DJ lights, strobe lights, wash lights..
- High Speed Motor for Moving Head Lights:With Super-fast servo motors, the moving head lights can respond quick and precise. It enables large-angle pan or tilt movement, and easy to change beam direction w/ 540°pan and 270°tilt. It can fleetly change stage lights effects..
- Multi Control Mode for DJ Lights:The DJ Lights can be control by Auto/Sound/DMX/Master-slave. The DMX channel is 9/16. With it, you can adjust the motor speed and rotation, dimming, strobe, sound-activated. It will make multi stage effects. Also, It is easy to get the effects through operate the function button..
- Unique Stage Lights Effects for Most Occasions:The DJ lights has different lighting effects, bringing unique charm to the stage. Stage lights are bright and blended seamlessly and color changes smoothly,the strobe is intense,which will add beautiful scene to your light show. You can use it in bar, disco hall, DJ show, party, stage, club, etc..
- Long Lifespan & Worry-free After-service:Built-in cooling fan, this stage li....
Check Stock2 Sets Pan Tilt Servo Mount Bracket for MG995 MG996R S3003 Steering Gear Robot Car Boat
- Compatible with Tower Pro MG996, MG996R, MG995, SG5010, MG995R or HS322, HS422, Hitec, Parallax, Futaba S3003, etc 40×20×36mm servo..
- This set bracket can be assembled to a 2 Degree of Freedom gimbal. Pan and Tilt for a horizontal surface.
- Aluminium Matte Coat, light and strong. high quality ball bearing, rotating smoothly.
- A camera or sensor can be mount on the bracket for a robot or a rover. The servo bracket can also be used in the shoulders and knees or another joint of humanoid robots, biped robots etc..
Check StockStrobe & Spotlight
- 1 color wheel, 14 Colors + White, Single rotation rainbow effect.Bi-directional rainbow effect, speed adjustable..
- 1 rotating gobo wheel, 17 rotating gobos + blank. Different strobe speed effect 12 t/s, free and pulse..
- Prism effect: eight prism (bi-directional rotation). 540°Pan movement, 270°Tilt movement..
- Pan/Tilt scanning position correction function. 16-bit precision smooth Pan/Tilt rotation..
- Fast, quiet and precise Pan/Tilt positioning. Motor focus from near to far. 16CH DMX512 channels..
Check StockTraxxas 58014-4 Slash 2WD Unassembled Kit 1/10-scale 2WD Short Course Truck
- Traxxas 58014-4 - Slash XL-5 1/10 2WD Short Course Truck Unassembled Kit.
- Features: Unassembled kit with electronics Includes XL-5 ESC, Titan 12-turn motor, servo, and TQ 2.4GHz radio system Clear, fully-trimmed Slash body....
- Includes: (1) Slash 2WD Assembly Kit: 1/10-Scale 2WD Short Course Truck (1) Clear body (1) Transmitter (1) Receiver (1) Servo (1) ESC (1) Motor (1)....
- Part number(s) included (in factory packaging): 58014-4.
Check StockBolsen 2 Set 2 DOF Short Pan and Tilt Servos Bracket Sensor Mount Kit for Compatible MG995 Retail
- 2set,- Using two servos (MG995/MG996 or HS322,HS422,Hitec,Parallax,Futaba, etc 40×20×36mm servo).
- Aluminium Matte Coat Pan and Tilt for horizontal surface, unassembled.
- Servo bracket used in the shoulders and knees or other joint of humanoid robots,biped robots etc..
- Can plant a camera or IR sensor for Robot, work with the 996 Servos.
- This price does not contain steering gear and pitman arm! Only support bearing and screw! NOT include servos.
Check StockJUKI MO-6714S Industrial 4-Thread Overlock Sewing Machine
- ✅Thank you! see below full info. on this machine,--- Get your sewing job done real fast with the Juki DDL-8700H sewing machine that can do up to 5500 stitches per minute. This Juki sewing machine has a large 11-inch arm space that lets you work with even large quilts. The stitch length of this 5500 SPM sewing machine goes up to 5mm which gives you a lot of freedom in doing your job..
- ✅The sewing machine complies with the "Juki Group Green Procurement Guidelines" on the use of hazardous substances, will be delivered in 3 boxes. 1) machine head, & some accessories* 2) servo motor & v belt 3) table top/legs/drawer/*2 spool-Thread Stand Bobbin Winder Oil Pan/Knee Lifter 1 Bobbins 1 Needles Instruction Manual Screw Driver Machine Oil 2-Euro Hinges & 2 Euro Rubber Mounts Table Rest Pin Safety Belt Guard.
- ✅1) machine head, & some accessories* 2) servo motor & v belt 3) table top/legs/drawer/*2 spool-Thread Stand Bobbin Winder Oil Pan/Knee Lifter 1 Bobbins 1 Needles Instruction Manual Screw Driver Machine Oil 2-Euro Hinges & 2 Euro Rubber Mounts Table Rest Pin Safety Belt Guard.
Check StockALAMSCN 5PCS SG90 9g Servo Motor + 16 Channel PWM Servo Motor Driver PCA9685 IIC Module 12-Bit DIY Kit for RC Robot Arm Helicopter Airplane Car Boat Remote Control for Arduino for Raspberry pi
- These SG90 9G micro servo motors have a completely new redesigned PCB and control system to provide more accuracy..
- Its internal gearing and motor are also upgraded to improve dead bandwidth and centering..
- For SG90 9G micro servo motor is far more accurate and safe to use in aircraft which require precise servo movements and perfect centering..
- Apply to remote control helicopters, micro robot, robot arm and boats. Fit for ALL kind of R/C Toys and also make electronics DIY based on Arduino ,Raspberry Pi..
- Package includes: 5PCS SG90 9g Micro Servo + 1PC PWM Servo Motor Driver. Cost-effective kit to meet your DIY needs..
Check StockMAD HORNETS 230W 7R Beam Moving Head Lights 8 Prism DMX Stage Lighting DJ Disco Show Party
- 230W projection lamp * 0 to 4° beam angle * 1 color wheel, 14 Colors + White, Single rotation rainbow effect..
- Bi-directional rainbow effect, speed adjustable. * 1 rotating gobo wheel, 17 rotating gobos + blank. * Different strobe speed effect 12 t/s, free and pulse..
- Prism effect: eight prism (bi-directional rotation). * 540°Pan movement, 270°Tilt movement. * Pan/Tilt scanning position correction function.
- 16-bit precision smooth Pan/Tilt rotation * Fast, quiet and precise Pan/Tilt positioning * Motor focus from near to far.
- LCD color display * 16CH DMX512 channels * Automatic patter/sound activate/master-slave control DMX.
Check StockCayer AF2451 67 inches Professional Video Tripod Kit with SV5 Monopod Feet
- 【Bundle Kit】This Bundle includes 1 kit of Cayer AF2451 Tripod Kit, and 1 Piece of SV5 Monopod Feet.
- 【Compact but Durable】: Constructed from Aluminum for durability while minimizing weight, folds to 25.6" and supports up to 13.2 lb, making it suitable for DSLR rigs, compact camcorders, and digital cinema cameras.
- 【Pan Tilt Head】: With 3/8" easy link connector for accessories, Fluid head pan/tilt locking, pre-set counterbalance with a fixed-length detached pan bar, offers 360° panning and +90° / -70° tilt.
- The flat base mount with a standard 3/8'' thread makes the head versatile for most tripod, slider, jib or crane.
- 【Leveling Center Column】: Attached with a built-in half ball leveling base that tilts 15° in any direction to orient your DSLR camera.
- 【Used as a Monopod】: Easily converts to a monopod by combining the center column with the detachable tripod leg and the SV5 monopod feet.
Check StockJuki LU-1508NS Industrial Walking Foot Sewing Machine, Vertical Axis Hook, Servo Motor
- ...nch. Needles: 9-18 DBX1 (16x231) up to size 19 Sewing Speed max.: 5,500 spm Stitch Length max.: 5 mm Presser Foot Lift by hand, max.: 5.5 mm.
- by knee, max. 13 mm Needle Bar Stroke 30.7 mm Hook: auto-lubricating full rotary hook Industrial Sewing Machi.
- ✅It comes complete with sewing machine table and Electronic DC Servo Motor 3/4 H.P, 1 PHASE, 110 VOLT, 0 ~3300 RPM,(drawer, belt, tools, led lamp and instruction manual PDF format ) brand new ✅ Includes: Thread Stand Bobbin Winder Oil Pan/Knee Lifter 5 Extra Bobbins 10 Extra Needles Instruction Manual Screw Driver Machine Oil Table top (size 48" x 20") Heavy Duty Legs, Table Top,*Servo motor V Belt Hardware..
Check Stock