Reviews P355gh Steel Plate - BestBuyersPro.com

YMDK Wholesales GH60 64 Anodized Aluminum CNC Case for GK64 DZ60 Type C GK61 Idobo 75 ID75 XD75

This link is only aluminum case which CNC Anodized.CNC Feet Included.
Compatible with GK64 GK61 PCB,GK61 64 Plate need to replace with gh60 plate.
New Type PCB GK64x GK64xs GK61x GK61xs support as well.Just need a GH60 plate is ok..

Designed to work with:60D,70D,50D,40D,30D,6D,7D,7D, 90D MarkII,5D MarkII,5DMarkIII,5DS,5DSR,650D,600D,550D,500D,450D,760D,750D,700D,100D,1200D,eos M5.
D7000,D7100,D7200,D300S,D610,DF,D3200,D3300,D5100,D5200,D5500.
Side Pipe Length: one 125mm ,another one 145mm.
Thread Holes for side pipe: 1/4"-20 & 3/8"-16.

Package Included:Plastic Case + Feet + Stabilizers + GK64x Hotswap Type C PCB + Plate + Cable + Removal Tool + Space Module.
Pls note:GK64x is wired kit.The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place.If some keys not working after plugging,please check whether your switch pin is bent or not.Make sure plug in 90 degree above plate.
This kit support 6.25u space and split double space.This plate is screwed to case directly.So if you want to replace normal GH60 case,you need to replace a non -replacable GH60 size plate is ok..
PCB has RGB presoldered,it's under per switch.This kit need to use Cherry MX switches and clones,optical switches is not supported.
There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again.3 pin 5 pin both are ok.

Vanguard QS-60S Quick Release Plate - Vanguard 1 Year Limited Warranty.
Compatibility: VEO Tripod Heads, TBH, BBH, GH-200 & GH-300T Quick-Release Plates, Arca Compatible heads.
Dimensions: 1.31 x 2.37" / 3.33 x 6.02cm.

Package Included:Plastic Case + Feet + Stabilizers + GK64x Hotswap Type C PCB + Plate + Cable + Removal Tool + Space Module.
Pls note:GK64x is wired kit.The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place.If some keys not working after plugging,please check whether your switch pin is bent or not.Make sure plug in 90 degree above plate.
This kit support 6.25u space and split double space.This plate is screwed to case directly.So if you want to replace normal GH60 case,you need to replace a non -replacable GH60 size plate is ok..
PCB has RGB presoldered,it's under per switch.This kit need to use Cherry MX switches and clones,optical switches is not supported.
There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again.3 pin 5 pin both are ok.

Includes: Aluminum Cage with Top Handle, Shoe Mount and 15mm Rods – Custom Fit for the Panasonic Lumix DMC-GH3 & GH4- Allows access to all camera functions and ports.
Anodized Aluminum. Multi-Threaded Cage and Removable Top Handle. Rod Clamp with 15mm Rods for Mounting Follow Focus, Matte Box, etc..
The form fitting camera cage allows full access to the camera’s controls, buttons, battery and SD card slot. The cold shoes, 1/4″ and 3/8″ mounting points allows you to mount different accessories..
Quick release base plate allows you to easily remove and remount the camera to the rods. With 1/4″ and 3/8″ mounting points on the quick release plate, the cage can be easily mounted and removed from a tripod, rig or other device..
The HDMI plug protector frees you from worrying about wearing out or damaging the micro HDMI port by repeatedly plugging or replugging a micro HDMI cable into your camera body..

Package Included:Plastic Case + Feet + Stabilizers + GK64x Hotswap Type C PCB + Plate + Cable + Removal Tool + Space Module.
Pls note:GK64x is wired kit.The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place.If some keys not working after plugging,please check whether your switch pin is bent or not.Make sure plug in 90 degree above plate.
This kit support 6.25u space and split double space.This plate is screwed to case directly.So if you want to replace normal GH60 case,you need to replace a non -replacable GH60 size plate is ok..
PCB has RGB presoldered,it's under per switch.This kit need to use Cherry MX switches and clones,optical switches is not supported.
There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again.3 pin 5 pin both are ok.

SmallRig Cold Shoe (2pcs Pack) 2060 could be mounted on any camera accessories with 1/4" and M2.5 threaded holes, such as cage, cold shoe block, handle and plate etc. Such as cage for sony (a6500 a6300 a6500), cage for panasonic (gh5 gh4 gh3), etc..
The counter bore hole in the center is attachable to a 1/4’’ screw, but the 1/4’’ screw will not touch the hot shoe contact of accessories mounted on the cold shoe..
There comes with two secure bending bevels on the one end to prevent accidental removal.
The arrowheads on the cold shoe show the direction to mount additional accessories..
NOTE: This Cold Shoe Mount is NOT suitable for DJI gimbal and NOT for ZHIYUN as well. For using on a cage, except for SmallRig Full Cage1661, you only need to lock it on the cage via the included 1/4"-20 screw, the M2.5 threaded is unnecessary..