Reviews Oxygen Sensor Socket Rack

KUNTEC 21 Piece O2 Sensor Socket Set Universal Oxygen Sensor Removal Install Tool Set

  • Oxygen Sensor Socket is designed for the removal and installation of oxygen sensors, injectors and thermal switches.
  • Side cutout sections allow the sockets to fit over wiring harness and prevent damage to wires.
  • 7/8inches Short low Profile O2 Oxygen Sensor Socket, 7/8inches Universal Oxygen Sensor Socket.
  • Universal fit for Audi, BMW, Citroen, Mercedes, Ford,Peugeot, Renault, Skoda,OPEL, Volkswagen and so on.
  • O2 Oxygen Sensor Socket is constructed from chrome-vanadium steel (CR-V) for extra strength and longevity, protect them from rusting.
Check Stock

Offset Oxygen Sensor Socket 3/8-Inch Drive 7/8-Inch 22mm Wire Gate Accesses Sensor from Side Preventing Damage to Wires Universal for Most Cars

  • PREMIUM QUALITY: Made of premium chrome molybdenum steel, this socket allows the user to apply maximum torque to ensure precise assembly and function.....
  • DESIGN: The socket has a slotted design. So you remove the oxygen sensor with the harness still connected. This 3/8" drive oxygen sensor socket is....
  • FEATURES: 7/8" (22mm) socket fits most oxygen sensors, works with any 3/8" drive ratchet or breaker lever, offset drive gate with wire links the....
  • FUNCTION: This oxygen sensor is very convenient to use, the sensor is in the harshest environments and may need to remove some elbow grease, this....
  • WHAT YOU GET: 1 x Offset Oxygen Sensor Socket. This product is sure to meet your requirements. If you have any questions, please contact us in time,....
Check Stock

ABN Oxygen 02 Sensor Socket 7-Piece Tool Kit – 22mm (7/8in), 27mm, 29mm – All Vehicle O2 Removal and Installation

  • NO MORE HASSLE: The ABN Oxygen 02 Sensor Socket 7-Piece Tool Kit – 22mm (7/8” Inches), 27mm, 29mm – All Vehicle O2 Removal and Installation is for inspection, removal, and installation of hard-to-reach oxygen sensors, oil pressure switches, oil pressure sending units, thermal sensor switches, vacuum switches, and brake light switches.
  • Each socket is permanently etched with size marking for your convenience.
  • MATCHES YOUR CAR: Universal fit for Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda, Vauxhall/Open (GM), and Volkswagen.
  • Sizes include 22mm (7/8”), 27mm, and 29mm.
  • For both heated and non-heated oxygen sensors.
  • Compatible with 3/8-inch and 1/2-inch ratchet drivers or extensions.
  • Side cutout sections allow the sockets to fit over wiring harness and prevent damage to wires.
  • BUILT TO LAST: Constructed from chrome-vanadium steel (CR-V) for extra strength and longevity.
  • Tools have a light coating of oil to protect them from rusting.
  • EASY STORAGE: Heavy-duty 9” x 2.25” x 8” inch (22.9cm x 5.7cm x 20.3cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • CONTENTS: Package includes (1) 29mm pressure/vacuum switch 6pt socket + (1) 22mm (7/8 inch) vacuum switch 6pt socket + (1) 22mm (7/8 inch) v....
Check Stock

DASBET 5pcs O2 Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set

  • 3 types of universal socket wrenchs cover various situations of oxygen sensor location.
  • Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • M12×1.25MM & M18×1.5MM Threads Chaser: Oxygen sensor thread chaser tool are used for cleaning and re-threading damaged spark plug hole. Cleans damaged spark plug ports and threads. Rethreads damaged spark plugs, eliminates corrosion and straights damaged threads. Reduces the chance of cross threading..
  • This 5pcs oxygen sensor and threads chaser set is suitable for most contemporary vehicles. The oxygen sensor sockets fit on most cars and are ideal for the removal oxygen sensors..
  • Durable: Made from high performance chrome molybdenum and solid cast steel construction for strength and durability, finish with black oxide to prevent rust..
Check Stock

GEARWRENCH 8 Pc. Sensor and Sending Socket Set - 41720

  • Designed for the removal and installation of oxygen sensors, oil pressure sending units, and vacuum switches.
  • Includes 3/8" drive 7/8" slotted socket for PVS, TVS and O2 sending units.
  • Includes 3/8" Drive 7/8" (22mm) socket for Oxygen Sensor Units.
  • Includes 3/8" Drive 1-1/16" Deep socket for Oil Pressure Sending units.
  • Includes 3/8" Drive 7/8" (22mm) Low Profile Offset socket for O2 Sensor Unit.
  • Includes 1/2" Drive 1-13/16" socket for Oil Sending Unit.
  • Includes 1/2" Drive 1-1/16" socket for Thermal Sensor units.
  • Durable blow mold case for safe storage and tool retention.
Check Stock

HYAT 5pcs Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set

  • Ideal for removing and installing oxygen sensors and vacuum switches on vehicles with computer-controlled engines.
  • 3 Different types of sockets cover various situations of oxygen sensor locations.
  • Universal 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar.
  • Special side cutout design allows easy access to oxygen sensor from any section and prevents damage to wires.
  • Set includes: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
Check Stock

ITEQ 5 Pcs Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set

  • Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines.
  • 3 types of universal socket wrenchs cover various situations of oxygen sensor location.
  • 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar.
  • Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires.
  • Set Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
Check Stock

Bosch 17018 Original Equipment Wideband Oxygen Sensor for Select 2000-02 Subaru Forester, Impreza, Legacy, and Outback Vehicles

  • Offset oxygen sensor socket provides extra leverage for easier removal even in hard to reach spots.
  • Slotted design allows removing oxygen sensor with wiring harness attached.
Check Stock

HFS (R Automotive Oxygen Sensor Socket Set (3PCS Socket Set)

  • Designed for the removal and installation of oxygen sensors, pressure sending units, and vacuum switches equipped with wires or vacuum tubes.
  • Including 7/8" Short low Profile O2 Oxygen Sensor Socket, 7/8" Universal Oxygen Sensor Socke 7/8" Universal Vacuum Switch PVS, TVS Socket Tool..
Check Stock

8MILELAKE 10pcs Oxygen Sensor Socket Set Sensor Oil Pressure Sending Unit Socket Set

  • 10Pcs Sensor Oil Pressure Sending Unit Socket Set Oxygen Injection Tool Set Remove Oxygen.
  • Sensors, Injectors, Oil Pressure Sending Units And Vacuum Switches. Heat-treated Chrome.
  • Vanadium And Chrome Molybdenum Steel With Black Oxide Finish Accepts Either 3/8 Or 1/2"".
  • Drive Ratchet Depending On The Size of The Socket 10Pc Oxygen Sensor & Diesel Injection Oil.
  • Pressure Unit Vacuum Switches Socket Set Heat Treated Chrome Vanadium & Chrome Molybdenu.
Check Stock