Reviews Output Gears

SGCB Pro 5” RO Rotary Polisher for Auto Detail Polishing Swirl Scratch Removing 5/8” Spindle Thread Soft Start 6 Variable No Load Speed Dial Control Car Buffer Waxer 2-Deduction w/ 5” Backing Plate

  • READY-TO-HAND & HIGH EFFICIENCY DELIVERING: FORCEFUL MOTOR ENGINE --- Input Power: 800w-1200w, The Output Rotary Speed Of Our SGCB Polisher Ranges From 0-700 Rpm To 0-2500 Rpm! With Timely Adjusting And Powerful Torque Force Output, It Can Always Produce And Maintain Constant Speed! The Simple Speed Diagram Can Enable You To Learn It Immediately, Very Easy To Understand And Operate! Fatigue, Tireness And Pain Relieving And Avoid Dropping The Heavy Polisher Onto The Car And Causing Any Damages!.
  • FAR MORE POWERFUL TORQUE OUTPUT: DOUBLE SPEED REDUCTION GEARS SYSTEM --- Adopting 2-Level Speed Reduction Gears Is One Of The Most Prominent Features Of SGCB Polisher! Unlike The Ordinary Ones Driven By Motor Directly, The Double Gears Delivery The Driving Force From The Powered Shaft To Backing Plate, Largely Transferring The Rotary Speed Into The Torque Especially In Lower Speed Gear! Even Forceful Polishing Strength Delivering Than Other Ones Do And Never Stop Or Break Off In The Polishing..
  • EASY, COMFORTABLE WORKING EXPERIENCES: ERGONOMIC DESIGN --- Adopted By Premium & Hard Plastic, Well Crafted In Ergonomic Shape According To The Features Of Human Hands, The Machine Body Feels Smooth Holding Sense And Comfortable In Work! Furthermore, The Inte....
Check Stock

Pure Nickel Strip- 99.6% Nickel for 18650 Soldering Tab for High Capacity Lithium, Li-Po Battery, NiMh and NiCd Battery Pack Battery and Spot Welding, a U.S. Solid Product (0.2x8x100mm, 100pcs)

  • ...ace, wear resistant and beautiful, fire-proof and anti-fall. 2mm Thickened pure copper strip and imported MOS tube can save energy and can provides longger service time. The welding machine itself has overcurrent protection, low voltage protection, overvoltage protection, and overtemperature protection. Intelligent output current. Can guarantee safe use..
  • ✅【Quick Input & 9 Gears Adjustable】：This spot welding equipment adopts Type-c interface, 4 hours fully charge under 5V 1A input. Built-in high-rate polymer power cell, the maximum output current is up to 650A, and it can continuously weld thousands of points after being fully charged. 9 gears of output power adjustable, 1gear(lowest) and 9gear(highest)..
  • ✅【With Charging Control Module & Indicator Light】:With output power and remaining power indication, there are two output modes: 1.5s timing trigger output and automatic detect welding pen output. ---This spot welding kits tools has 4 dual-color indicator lights, the power indicator flashes when charging.When all four lights are on, it is fully charged.It will automatically shut-down after 15 minutes of no use..
  • ✅【With Welding Pen & Portable Design】:Integrated Gold-plate terminal welding pen, with fine conductivity and low contact re....
Check Stock

Mini Spot Welder With LCD Screen, Faiuot Upgraded Portable 9 Gear Adjustable Spot Welder Machine, Spot Welding Equipment Energy Storage 5500mAh for DIY Battery

  • 【Upgraded LCD Screen Spot Welder】Our DIY spot welding machine is newly designed with visible LCD Screen. You can see the internal system include supply power, welding gears, welding count and output voltage on the OLED display of the welding machine, and it is touch screen adjustable..
  • 【High Speed Battery】 After being fully charged, thousands of points can be continuously welded on a 0.1-0.15mm nickel sheet. With its own charging management control module, you can use the power bank to charge the spot welder..
  • 【16In Welding Pen & 30 Gears Adjustable】 16In spot-welding pen consists of multiple strands of high temperature wire with fine torsional resistance ability, making the operation more flexible. 7mm solid copper rod is with fine conductivity and low contact resistance, quickly detachment and easy carrying. This handheld spot welder with 9 Gears adjustable, welding is more precise and the welding effect is more perfect..
  • 【Quality Material】Adjustable spot welding machine is made of aluminum alloy material, welding machine surface is anodized, wear-resistant and beautiful, fire prevention and fall prevention. 2 mm thick pure copper strip, ultra-low internal resistance, increased over current capacity..
Check Stock

Mini Spot Welder With LCD Screen, Faiuot Upgraded Portable 30 Gear Adjustable Spot Welder Machine, Spot Welding Equipment Energy Storage 5500mAh for DIY Battery

  • 【Upgraded LCD Screen Spot Welder】Our DIY spot welding machine is newly designed with visible LCD Screen. You can see the internal system include supply power, welding gears, welding count and output voltage on the OLED display of the welding machine, and it is touch screen adjustable..
  • 【High Speed Battery】 After being fully charged, thousands of points can be continuously welded on a 0.1-0.15mm nickel sheet. With its own charging management control module, you can use the power bank to charge the spot welder..
  • 【16In Welding Pen & 30 Gears Adjustable】 16In spot-welding pen consists of multiple strands of high temperature wire with fine torsional resistance ability, making the operation more flexible. 7mm solid copper rod is with fine conductivity and low contact resistance, quickly detachment and easy carrying. This handheld spot welder with 9 Gears adjustable, welding is more precise and the welding effect is more perfect..
  • 【Quality Material】Adjustable spot welding machine is made of aluminum alloy material, welding machine surface is anodized, wear-resistant and beautiful, fire prevention and fall prevention. 2 mm thick pure copper strip, ultra-low internal resistance, increased over current capacity..
Check Stock

Mini Spot Welder With LCD Screen, Faiuot Upgraded Portable 30 Gear Adjustable Spot Welder Machine, Spot Welding Equipment Energy Storage 5000mAh for DIY Battery

  • 【Upgraded LCD Screen Spot Welder】Our DIY spot welding machine is newly designed with visible LCD Screen. You can see the internal system include supply power, welding gears, welding count and output voltage on the OLED display of the welding machine, and it is touch screen adjustable..
  • 【16In Welding Pen & 30 Gears Adjustable】 16In spot-welding pen consists of multiple strands of high temperature wire with fine torsional resistance ability, making the operation more flexible. 7mm solid copper rod is with fine conductivity and low contact resistance, quickly detachment and easy carrying. This handheld spot welder with 9 Gears adjustable, welding is more precise and the welding effect is more perfect..
  • 【Quality Material】Adjustable spot welding machine is made of aluminum alloy material, welding machine surface is anodized, wear-resistant and beautiful, fire prevention and fall prevention. 2 mm thick pure copper strip, ultra-low internal resistance, increased over current capacity..
  • 【High Speed Battery】 After being fully charged, thousands of points can be continuously welded on a 0.1-0.15mm nickel sheet. With its own charging management control module, you can use the power bank to charge the spot welder..
Check Stock

CHUSE Digital Power Controller Suitable for CHUSE C18/C22/P1 Handpiece, 3.5mm*1.5mm interface

  • There are 9 gears (1-9) by wire control. The default startup is gear 5. The gears can be adjusted according to the items required..
  • Long press the on/off key for 3 seconds to start / close the remote control, and click to run / pause the machine..
  • One end of the charging head connected by wire is USB interface, and the end connected to the machine is 3.5mm * 1.35mm..
  • Input: 100-240V, output: 12V, 1A, Weight: 90g, box size: 115 * 78 * 40mm.
Check Stock

Bar's Leaks Axle and Differential Gear Repair

  • Seal Conditioner – stops current and prevents future leaks by protecting and reconditioning seals..
  • Extreme Pressure (EP) and Anti-Wear (AW) Agents – provide excellent metal-to-metal wear protection reducing noise and gear temperatures. Our sulfur, nitrogen and phosphorus additives meet the requirements of API GL-4 and GL-5 specifications..
  • Friction Modifier – supplements the EP/AW additives to help reduce noise and wear. This in turn helps shifting in a manual transmission and also stops chatter in limited-slip posi-traction axles..
  • Performance Additive Booster – includes tackifying agents and highly sheer-stable multigrade viscosity modifiers to keep oil on the gears and bearings where it can better lubricate, especially at higher temperatures. Pour Point Depressant (PPD) allows product to flow even at very low temps..
  • Manufactured in the USA, this product works in all manual gearboxes, differentials, open & posi axles and more. Stops pinion, axle, output shaft and other seal leaks. Reduces grinding, whining, clunking and protects gears..
Check Stock

Spot Welder with LCD Screen, 70 Gears Adjustable DIY Battery Spot Welding Equipment Portable Mini Spot Welder for Battery, Built-in 7500 mAh Rechargeable Battery, Type-C Port, Nickel Strip & USB Cable

  • ... anodized welding machine surface, which is wear-resistant and fireproof to use. Newly upgraded LCD screen can clearly know the system internal temperature, charging status, remaining battery, gear level and time interval of the spot battery welder..
  • 【70 Gears Adjustable】Mini spot welder with 70 gears adjustable output power design, it can satisfy more professional welding demands. 1.0-2.9 gears suitable for thin nickel sheet.
  • 3.0-6.5 gears suitable for medium thickness nickel sheet.
  • 6.5-8.0 gears suitable for thick nickel sheet, iron sheet and steel sheet. Very fine adjustments can make the welding more precise and the spot welding effect more perfect..
  • 【Built-in 7500 Ma-h Rechargeable Battery】Portable spot welder built in 7500mA-h high-rate rechargeble battery,with type-C charging cable,can be fully charged within 3 hours, and it can continuously weld about 2000 points after being fully charged. It also can be used as a power bank when you need charging during traveling or outgoing, support 2.4A fast charging..
  • 【40cm Welding Pen & Safe to Use】The gold-plate spot-welding pen consists of multiple strands of high temperature wire, with fine conductivity,torsional resistance ability and low contact resistance,using safely. When the temperature....
Check Stock

ReliaBot 2PCs Flexible Couplings 5mm to 8mm for NEMA 17 Shaft and T8 Lead Screw for RepRap 3D Printer or CNC Machine

  • Directly Applied for Linear Actuator: This DC gearmotor has an integrated M3*55mm threaded rod as its output shaft, turn it into a linear actuator..
  • Applications: Gear motors can be found in many different applications, and are probably used in many devices in your home.
  • Reducing Speed to Offer More Torque: Gear motors are primarily used to reduce speed in a series of gears, which in turn creates more torque..
  • Lower Noise: Full metal gears would ensure a longer service life, high torque and less noise..
  • Meets your Different Needs: There are eight reduction gear motors of different speed and you can choose the one you need..
Check Stock

Spot Welder With Clear LCD Screen Faiuot Upgraded 10000mAh Portable 30 Gear Adjustable Spot Welder Machine Spot Welding Equipment Energy Storage for DIY Battery

  • ...prevention. 0.1-0.15mm thick nickel strip, ultra-low internal resistance, increased over current capacity..
  • 【10000mAh Battery & Power Bank Function】With 10000mAh battery, this mini spot welder can be fully charged within 3 hours. It can continuously weld thousands of points after being fully charged with max output 800A. And it can be also used as power bank when you need to charge..
  • 【40cm Welding Pen & 30 Gears Adjustable】 The spot-welding pen consists of multiple strands of high temperature wire with fine torsional resistance ability, making the operation more flexible. 7mm solid copper rod is with fine conductivity and low contact resistance, quickly detachment and easy carrying. This handheld spot welder with 70-speed output power adjustable, welding is more precise and the welding effect is more perfect..
  • 【Intelligent and Safe】The portable spot welder own perfect over-charge, and over-temperature protection functions. When the temperature is higher than 60¡ã, portable welding machine will automatically stop working to avoid damage to personnel or items. We offer 3 months free return and one year warranty for our spot welder..
Check Stock