Reviews Other Battery

[3200mAh] Battery for iPhone 6S (2022 New Version), Conqto New Upgraded Higher Capacity 0 Cycle Battery Replacement for iPhone 6S Model A1633, A1688, A1700 with Complete Professional Repair Tool Kits

  • （Battery Compatible Model）Conqto for iPhone 6S Replacement Battery ONLY Work For Model A1633/A1688/A1700. Note: 6S Battery NOT for Other iPhone Model. Please Confirm Your iPhone Model From Phone Back Cover to Avoid Wrong Order.[Not for iPhone 6, 6 Plus, 6S Plus or other Phone Models..
  • （High Capacity 6S Battery）3200mAh This Replacement Battery for iPhone 6S is 86% Higher Power Than Original Battery. Brand new 0 Cycle,Built to last up to 1000 Charging Cycles to Provide Longer Battery Life.Grade A+ cells Ensure High-speed and Efficient Charging..
  • （Great A+ Battery Cells）100% New High Quality Updated Battery For iPhone 6S, Uses Grade A+ Battery Cells With Ce And Rohs Certified, Each Battery Comes With A Tested Under Strict Quality Control Standard, And Built-In IC Chip To Prevent From Over-Charging, Over-Heating And Other Defects. It Will Provide You With Up To 1000+ Charge Cycles With The High-Speed And Efficient Charge..
  • （Specifications and Tips）The Capacity of iPhone 6S Battery :3200mAh.
  • Voltage: 3.82V , “When Using This 6S Replacement Battery ,Please Use The Original Charger Charging And Remember That Its Full Performance And Longevity Is Only Achieved After 3 To 5 Complete Charge And Discharge Cycles, Thus The Battery Can Be....
Check Stock

Technical Precision 12V Battery for Hot Wheels Dune Racer W6201 & Other Power Wheels Fisher Price Rechargeable Gray Battery - 1 Unit

  • WHAT YOU GET - 1 Unit - 12 volts rechargeable gray lithium battery replacement for Hot Wheels Dune Racer W6201 and other Fisher Price Power Wheels vehicle battery units..
  • 100% COMPATIBILITY - Our 12V gray battery is a perfect replacement for a run-down Hot Wheels Dune Racer W6201 battery and any other Power Wheels battery-powered vehicles with a 12 volt, 9.5 Amp/Hr battery requirement..
  • UNIT ONLY - This product does NOT come with a charger. To charge the battery, please use the enclosed charging unit of your existing Power Wheels vehicle..
  • FIRST-TIME USE REMINDER - Once the unit is received, charge the battery for at least 18 hours but no more than 30 hours. Recharge the battery for at least 14 hours (no more than 30 hours) every after use to prevent premature battery failure..
  • DISCLAIMER - This battery unit only replaces battery-powered vehicles with similar voltage requirements. FOR SAFETY: KEEP OUT OF CHILDREN'S REACH & ALWAYS READ THE INSTRUCTIONS BEFORE INSTALLING AND USING THE BATTERY UNIT..
Check Stock

Battery for iPhone 7, 3300mAh Wavypo 2023 New Version Wavypo Upgraded High Capacity Battery Replacement for iPhone 7 A1660 A1778 A1779 (No Tools)

  • 【60% HIGHER THAN ORIGINAL BATTERY】Upgrade 3300mAh High Capacity iPhone 7 Battery, more than original battery, more time to use your phone. (Note: Battery compatible with iPhone 7 A1660 A1778 A1779, NOT compatible with iPhone 7 Plus or other iPhone model)..
  • 【TRUE NEW 0 CYCLE Battery】Made from a brand new lithium polymer and Grade A+ battery material, a true 0 cycle, charge once to iphone 7 replacement battery get longer use time. Built to last up to 900+ charging cycles, 200 cycles more charging than other batteries, longer service life and can save you money..
  • 【TESTED SECURITY】WAVYPO iphone 7 battery with CE, FCC, UL, PSE and ROHS certification. Multiple-protection for safer operation for both user and devices, built-in Micro Chip prevents overcharging, over-heating and other defects. Can better protect your mobile phone circuit board, please rest assured to use..
  • 【EASY TO INSTALL】We gave away a full repair tool kit for iphone 7 batteries, relevant videos of replacing the battery on YouTube are recommended. TIPS: Using up all the power of battery for the first three times before charging,and then take a full charge,thus the battery can be reached the optimum effect of using..
  • 【BEST CUSTOMER SERVICE】Protecting the interests of our cust....
Check Stock

Neewer Vertical Battery Grip，Compatible with Canon EOS R Mirrorless Digital Camera，Replacement for BG-E22，Works with LP-E6N/LP-E6NH Battery (Battery Not Included)

  • Camera Battery Grip: Designed for the Canon EOS R mirrorless digital camera (not for EOS RP/R5/R6), this battery grip lets you hold your camera comfortably for vertical shooting while extending its battery life.
  • Easy Controls: Use the shutter button on the battery grip for more comfortable portrait shooting. Also comes with a flash sync (PC sync) port for connecting an external flash and other buttons and dials such as the AF start button and AE lock / FE lock button for more convenient controls.
  • Extra Power: Please use 1 or 2 genuine Canon LP-E6N/LP-E6NH batteries for this grip, or other brands LP-E6N/LP-E6NH Full Decoding Dummy Batteries (Note：Only Supports Neewer LP-E6 battery，Not compatible with other brands LP-E6). Conveniently charge the battery grip without removing the batteries via the USB-C charging port with the included charger.
  • Stable Mounting: Securely mount your EOS R to the battery grip with the dual locating pins..
  • Package Contents: Neewer Battery Grip for EOS R, Battery Grip Charger, User Manual.
Check Stock

NOCO HM408 4D Commercial-Grade Battery Box

  • Commercial Grade - Designed to accommodate a single group 4D battery, including automotive, marine, RV, and other commercial batteries..
  • Rugged Design - Four corner fastening system and captive lid for easy installations, large cable entry holes for large gauge cables, full flow ventilation for releasing battery gases, and a battery acid reservoir..
  • Designed for Rugged Environments - Impact-resistant down to minus 40 degrees Fahrenheit, withstands acid, gas, oil, and other contaminants, and immune to UV exposure..
  • Keeps your Battery Safe - Limits water entry, effectively collects battery acid, allows adequate ventilation, and protects against accidental contact of battery terminals..
  • Certified and Tested - Meets United States Coast Guard (USCG) Code of Federal Regulations 183.420 and American Boat and Yacht Council (ABYC) E-10.7 specifications..
Check Stock

NOCO HM484 8D Commercial-Grade Battery Box

  • Commercial Grade - Designed to accommodate a single group 8D battery, including automotive, marine, RV, and other commercial batteries..
  • Rugged Design - Four corner fastening system and captive lid for easy installations, large cable entry holes for large gauge cables, full flow ventilation for releasing battery gases, and a battery acid reservoir..
  • Designed for Rugged Environments - Impact-resistant down to minus 40 degrees Fahrenheit, withstands acid, gas, oil, and other contaminants, and immune to UV exposure..
  • Keeps your Battery Safe - Limits water entry, effectively collects battery acid, allows adequate ventilation, and protects against accidental contact of battery terminals..
  • Certified and Tested - Meets United States Coast Guard (USCG) Code of Federal Regulations 183.420 and American Boat and Yacht Council (ABYC) E-10.7 specifications..
Check Stock

iPhone 6/6s/7/8/SE Battery Case Upgraded [6000mAh] Protective Portable Charging Case Rechargeable Extended Battery Pack for Apple iPhone 6/6s/7/8/SE (4.7') - Black

  • 【Compatible Model】a.Please note this battery charging case is only fit for iphone 6/6s/7/8 (4.7 inch), b.Not fit for iPhone 6plus/6s plus/7plus/8plus(5.5 inch) or other models.
  • Not compatible with iPhone lightning headphone or traditional 3.5mm headphones, ONLY works with Apple airpods or other wireless Bluetooth headphone..
  • Add 120% Extra Battery Life】: Built-in 6000mAh thin but powerful Class A Li-polymer battery cell,this iPhone 6/6s/7/8 /SE 2020(2nd GEN) extended battery case more than double your iPhone’s battery life,never worry your iPhone run out of battery,a Must have for playing mobile game,travelling,camping,business trip and other indoor/outdoor activities..
  • 【Charging Safely,Max Protection,SYNC】: Lanluk Battery case uses premium polymer batteries,fire-proof plastic housing and smart chips to ensure safe charging,prevent your iPhone from short-circuiting, overheating and over-charging/discharging. Hard-shell design and a glass screen protector can max protect your iPhone from daily scratch. SYNC your iPhone to Macbook/PC/Laptop without removing this case charger..
Check Stock

DZS Elec 6pcs 15cm 9V Battery Snap Connector Clip Lead Wire Experimental Battery Snap Power Cable for Arduino Project or LED Light Bar

  • Type: 9V T Type Battery Snap Connector, to power anything that running with a 9V battery..
  • Use: Can be conveniently connected to other power module or Arduino board..
  • Cable: Approx. 15cm (6 inch) length, red wire for positive, black wire for negative, easy to connect or solder to other equipment..
  • Application: Can be used for power supply or other 9V battery equipment, supplying power sourcec for Arduino Project or LED Light Bar etc. portable, easy to use..
  • Package: 6pcs 9V T Type Battery Snap Connector Clip Lead Wire (NO battery included).
Check Stock

QTshine Battery Case for iPhone 6/6s/7/8, Upgraded [6000mAh] Protective Portable Charging Case Rechargeable Extended Battery Pack for Apple iPhone 6/6s/7/8 (4.7') - Black

  • ➤【Advanced Sync & Convenient LED Indicator】Amazing sync-through technology that you can simultaneously charge your iPhone and the iPhone iphone 6/6s/7/8 battery charger case together. Conveniently sync your iPhone to your Macbook, PC or laptop without having to take the battery case off. 4 LED battery level indicators that let you know how much power you have (0–25%–50%–75%–100%). Besides, you can switch on/off the iPhone battery case..
  • ➤【Safe Charging and Protective Design】QTshine battery case for iPhone 6/6s/7/8 was charging and protecting double function, well-made hard case with 360 degree protective bumper design, protect your iPhone from scratches or other daily wear and tear. certificated by CE, FC and RoHS. high-quality polymer batteries and safe circuit diagram design, internal chips to protect your smart phone from overheating, short-circuiting, over charging, and discharging..
  • ➤【Risk Free & 24 Month after-Sale Technical Support】Customer satisfaction is our primary priority. if you have any questions, issues or concerns please email to our after-sale team and we would be more than happy to assist. 24 Month after-Sale Technical Support, 30days no-hassle return and 24H customer service..
Check Stock

5 Pack Black Light Micro Effects Light 405nm Violet LED Mini Blacklight with 9V Battery Clip for Props Scenery Fluorescent Paints Theatrical Costumes UV Glow Inks

  • Type: 9V T Type Battery Snap Connector, to power anything that running with a 9V battery..
  • Use: Can be conveniently connected to other power module or Arduino board..
  • Cable: Approx. 15cm (6 inch) length, red wire for positive, black wire for negative, easy to connect or solder to other equipment..
  • Application: Can be used for power supply or other 9V battery equipment, supplying power sourcec for Arduino Project or LED Light Bar etc. portable, easy to use..
  • Package: 6pcs 9V T Type Battery Snap Connector Clip Lead Wire (NO battery included).
Check Stock