Reviews Orifice Flowmeter - BestBuyersPro.com

RX WELD Dual Output Argon Regulator Flow Meter Mig Tig 0-60CFH CGA580 Inlet 5/\8 UNF-18RH Outlet

✔ VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet).
✔ Accurate Gas Flow Gague：Gauge measuring range 0-4500PSI, This flowmeter does not use a diaphragm, so it is more reliable than the flow-gauge style..
✔ RELIABLE QUALITY：Our dual dutput argon regulator is made by durable brass, enough to use in a long time..
✔ OUTPUT:Female 9/16" x 18 nut and male 5/"8 UNF-18RH fitting- 1/4" Hose Barb Adapter Included.
✔ Perfect for MIG and TIG Welding Applications： Our Flowmeter is an economic alternative for the demanding customers who wants more precise gas metering. Fits standard argon, helium, nitrogen, and argon/CO2 style gas bottles from most supplier..

?Orifice Tube Remover? x Car air conditioning orifice tube removal tool,for remove and install orifice tubes,auger for removing broken Orifice tubes,simply turn into Orifice tube for grip, Use the nut to apply even and steady pressure so you don’t damage the small plastic ears on the orifice tube,then remove Orifice tube.Professional tools will make replacement and maintenance easier.Fits many GM..
?Material? x Orifice Tube Removal Tool is made of high quality metal,sturdy and durable, can be used for a long time..
?Easy to use? x This tools slides in and locks on to tabs on the orifice with a slight twist,then able to pull / rotate the old orifice until it could get out.It saves time trying to weasel a pair of needle nose pliers into a small area to pull out the old orifice tube.No worries about snapping off the end with pliers..
?Tip? x Sometimes you have to add a little bit of heat on the pipe to make the other fees to loosen up a little bit because otherwise sometimes for the brakes and it's going to be more hot to take it out so it's better to apply some heat the heat down and then start pulling..
?Package? x 1 X Car Air Conditioning Orifice Tube Removal Tool.

The gas flowmeter is made of high quality material, it is transparent and can hold up to 0.6MPa pressure..
Beautiful look,low weight,unbreakable and long life..
Used to measure single-phase non-pulsating gas flow,easy to use and lasting performance..
Mainly used for detecting the oxygen, nitrogen flow, control gas flow and can be used in industry, flowmeter interface is connected by thread....

Argon/CO2 Regulator For Welding: Zistel Argon Regulator is a ideal choice for professional TIG/MIG welding applications, which can be used to reduce and control pressure levels..
Argon Flowmeter With Pressue Gauge: Our argon flowmeter is equipped with pressure gauge, allowing you to view how much gas is left in the tank range 0 to 3500psi..
CGA580 Inlet Connection: Zistel pressure regulator is suitable for standard Argon /O2/N2 Tanks with CGA-580 Inlet Connection. You can connect the welding hose via female 5/8UNF-18RH fitting..
Hose Included: Zistel 10Ft Hose Quick Connect Fitting enable your tanks at a safe distance from your welding projects..
Field of Application: Idea choice for welding, cutting ,chemical and electronics industry.

Argon flowmeter can be used to reduce and control pressure levels, which is a ideal tool for MIG TIG welding, chemical and electronics industry..
Inlet: CGA580, fit for argon and argon, CO2, and helium tanks..
Outlet: female 9/16" x 18 nut and male 5/8" x 18 fitting. Pressure Range: 0-3500 PSI. 1/4" Hose barb adapter is included.
The flowmeter body is made of full copper material. Fit for most kinds of welders, such as Miller, Lincoln, HTP, etc..
Output flow adjustable from 10 to 60CFH (cubic feet per hour), which is indicated by a ball which moves up and down in the flow tube..

1.VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet).
2.Accurate Gas Flow Gague：Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube..
3.RELIABLE QUALITY - Our argon flow meter's body is made of high-quality brass, which can withstand harsh environments..
4.OUTPUT:Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting.It also comes with a standard 1/4" barbed fitting.
5.DESIGNED and PERFECT for MIG and TIG Welding Applications. Our Flowmeter is an economic alternative for the demanding customers who wants more precise gas metering..

[COMPATIBILITY]--These are propane nozzle for turkey pot cooker, cast iron cooker stove with 3/8" male thread x 1/8" NPT thread and jets. The orifice compatible with Gasone cooker or other similar brand..
[SIZES]--The thread of propane orifice: 3/8" flare MNPT x 1/8" MNPT..
[PREMIUM QUALITY]--This gas orifice jets connector brass hose fitting is made of high quality brass. Brass for corrosion resistance and durability , high temperature ductility and low magnetic permeability..
[NOTE]--The propane stove orifice is not fit for potable water appliances..
[SERVICE WARRANTY]--If you have any questions with 3/8 flare to 1/8 orifice, please contact with us and we will reply within 24 hours..

200 Amp fully assembled 26V Series TIG Torch, designed for welders with Dinse or Stud Connectors or with separate TIG Module or TIG Box..
Choose between 5/16" Terminal, LC-40 cable connectors or Dinse Style Connectors, (Please check Picture #2 for dimensions and characteristics).
Available with 12.5 or 25 feet Cable and Straight or Flexible Head. Torch head with valve for a manual closure of argon flow..
2 Pieces, gas hose is separate from power cable for independent connection with welder gas outlet or directly to the argon flowmeter..
Accessory Kit and Heavy-Duty Nylon Cable Cover are Included. Other accessories might be needed to connect the argon line to your welder or flowmeter.....