Reviews Orange Pi Zero

AURSINC MMDVM Hotspot Board + Antenna Support UHF VHF Support P25 DMR YSF DSTAR NXDN POCSAG for Raspberry Pi-Zero W, Pi 3 (OLED Board)

  • MMDVM hotspot supports UHF VHF, frequency range: 144MHz-148MHz, 420MHz-475MHz, 842MHz-950MHz (depending on ADF7021 and TCXO, HAT firmware amateur radio brand license restrictions).
  • AURSINC hotspot board supports Raspberry Pi 3B, 3B +, Pi ZERO, compatible with NanoPi NEO, Orange Pi, compatible with BlueDV (requires USBtoTTL or Bluetooth model).
  • Hotspot board saves electricity, High quality TCXO, stable, low BER. Support MMDVM mode DMR / YSF / P25 / NXDN / DSTAR / POCSAG. Support online upgrade, User-friendly OLED and Nextion special design location, reserved for additional installation of Bluetooth modules.
  • If the Raspberry fails to connect the hotspot board, please try update the firmware of the hotspot board by conducting the command: sudo pistar-mmdvmhshatflash hs_hat-12mhz.
  • Compatible with P4 settings:since our mmdvm board is defautly setup for Pi-Zero W, Pi 3. and if you do want to connect it with your Pi 4, you could try below methods. PICK ONE. Method 1: Remove the R1 resistance of the hotspot board(single/dual).
  • Method 2: Cut off the 2 Raspberry Pi pin headers on the corners of the board ( pick one to operate on your MMDVM board, refer to the product image for the R1 and 2 pin headers locations).
Check Stock

Zopsc Digital Trunk Board with Expansion Board for Raspberry Pi GS68 MMDVM DMR Repeater, Support for Upgrades via for ST-Link, USB, GPIO.

  • With USB interface, can connect for Raspberry Pi and PC, built-in PL2303 model..
  • Support MMDVM mode for DMR / YSF / P25 / NXDN / DSTAR / POCSAG..
  • The Repeater and Simplex modes can be changed at any time by changing the RX / TX board sequence..
  • Support for Raspberry Pi 3B/ 3B/ Pi ZERO, compatible with for NanoPi NEO, for Orange Pi, compatible with for BlueDV (requires USB to TTL or Bluetooth model)..
  • Support for VHF / UFH, frequency range, depending on your external radio..
Check Stock

Geekworm KVM-A4 Kit Compatible with PiKVM HDMI CSI for Raspberry Pi Zero 2W/Zero W Only(Not Include Raspberry Pi)

  • 【What is it】This kit allows user to realize a PiKVM / KVM project with Raspberry Pi Zero 2W/Zero W which can control a computer using a web browser!.
  • 【Compatiblity】for use with Raspberry Pi Zero 2W or Raspberry Pi Zero W only, NOT support Raspberry Pi Zero..
  • 【Function】Remotely turn on/ turn off / restart your computer.
  • reinstall the OS using the Virtual CD-ROM or Flash Drive.
  • Simulate a keyboard, mouse, and a monitor and presented in a web browser, etc..
  • 【How to Power】Power Input: 5.1Vdc +/-5% , ≥3A.
  • Power Via USB Type-C port of X630-A4. (DON'T power via Raspberry Pi's micro USB port, because it is occupied as USB OTG.) Recommend to use Geekworm UL listed 20W 5V 4A USB Type-C power adapter (ASIN:B09J856PND)..
  • 【Cooling Solution】Come with C296 aluminum alloy heatsink for heat dissipation of Raspberry Pi Zero 2 W. C296 also compatible with Raspberry Pi Zero W by using thermal pads of different thicknesses..
  • 【What Included】1 x X630-A4 V1.1 Expansion Board with Accessories, 1 x X630-A5 V1.0 Adapter Board with Accessories, 1 x X630 HDMI to CSI-2 Module with Accessories, 1 x Ethernet Cable(1m length), 1 x0.96 inch OLED Module.
  • 【Extra Needed】Raspberry Pi Zero 2W/Ze....
Check Stock

Data Visualization with Python for Beginners: Visualize Your Data using Pandas, Matplotlib and Seaborn (Machine Learning & Data Science for Beginners)

  • HIGH RESOLUTION – The 10.1 inch Raspberry Pi touchscreen LCD monitor (supports 10-Point touch) features high resolution of 1280*800 pixels and true-color image, giving you a truly immersive viewing experience..
  • PLUG AND PLAY – Just connect the control board and the screen by an HDMI cable and it can work immediately, needless of driver..
  • REAR FIXING – Adjustable fixing slots design for fixing most single board computers, widely compatible with Raspberry Pi 4B, 3B+, Zero, Banana Pi M5, Rock Pi X Model B, LattePanda V1, Orange Pi 4B and etc..
  • LESS WIRING – Configured driver board with multiple interfaces provides stable 5V/3A power output for the needs of the compatible boards, all the cables are designed with suitable length, neat and tidy when connecting..
  • NOT JUST A TOUCHSCREEN – Please refer to our online detailed toturial, where you can find the the 3D design drawing provided for diying your own case. Besides, we also share a variety of different plug-in and interesting projects when play with raspberry pi..
Check Stock

Vilros Raspberry Pi Zero- Zero W Compatible Case (Black)

  • Features 3 Covers, Sealed Open GPIO and Camera Module Compatible.
  • Includes a 40mm Raspberry Pi Zero / Pi Zero W Compatible Camera Cable and 2×20-pin Strip Dual Male Header.
  • Case ONLY Does NOT include Raspberry Pi Board Or Cables.
Check Stock

Geekworm Raspberry Pi Zero 2 W 18650 UPS Expansion Board X306 & USB HUB for Raspberry Pi Zero 2W/Zero W(Not Include Raspberry Pi)

  • 【Compatibility】Compatible with Raspberry Pi Zero 2 W & Pi Zero W, NOT support Raspberry Pi Zero..
  • 【One-Cell 18650 UPS HAT】Ideal Uninterruptible Power Supply (UPS) solution for Raspberry Pi Zero W/2W, Max 5.1V 4000mA Power Backup with 18650 single cell battery holder.
  • 【3-Port USB HUB】On-board three USB 2.0 Ports.
  • Gain 3 USB2.0, downstream ports which offer High-Speed (480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps).
  • 【How to Power】Power via USB Type-C 5V Power In port of X306.
  • (Recommend to use Geekworm UL listed 20W 5V 4A USB Type-C power adapter (ASIN:B09J856PND) ).
  • 【Cooling Solution】Recommend to use with C296 aluminum heatsink(ASIN: B09QMBCXLB) for Raspberry Pi Zero 2 W. C296 also compatible with Raspberry Pi Zero W by using thermal pads of different thicknesses..
  • 【Packing List】1 x X306 V1.1 Expansion Board.
  • Note: not inlcude Raspberry Pi board,18650 battery, GPIO Header & power adapter..
  • 【User Manual】Installation guide and user manual refer to Geekworm WiKi search X306..
Check Stock

Geekworm Raspberry Pi Zero 2 W SATA Storage, X301 2.5\ SATA HDD/SSD NAS Expansion Board & USB HUB Compatible with Raspberry Pi Zero 2 W / Zero W / Zero WH (Not Include Raspberry Pi & SSD/HDD)

  • 【Compatibility】Compatible with Raspberry Pi Zero 2 W & Pi Zero W / WH, not support Raspberry Pi Zero..
  • 【2.5" SATA HDD/SSD Shield & USB HUB】Ideal NAS storage solution for Raspberry Pi Zero 2 W/Zero W/WH to support 2.5" SATA HDD/SSD. With 3-port USB HUB..
  • 【How to Power】Power via USB Type-C 5V Power In port of X301.
  • (Recommend to use Geekworm UL listed 20W 5V 4A USB Type-C power adapter (ASIN:B09J856PND) ).
  • 【Cooling Solution】Recommend to use with C296 aluminum heatsink(ASIN: B09QMBCXLB) for Raspberry Pi Zero 2 W. C296 also compatible with Raspberry Pi Zero W by using thermal pads of different thicknesses..
  • 【Packing List】1 x X301 V1.0 Expansion Board.
  • Note: not inlcude Raspberry Pi board, SSGD/HDD & power adapter..
  • 【User Manual】Installation guide & document refer to Geekworm WiKi search X301..
Check Stock

Orange Pi 5 8GB Rockchip RK3588S 8 Core 64 Bit Single Board Computer, 2.4GHz Frequency Open Source Development Board Mini PC Desktop Run Orange Pi OS, Android12, Debian11 (Pi 5 8GB)

  • Orange Pi 5 uses Rockchip RK3588S new generation 8-core 64-bit processor, quad-core A76+quad-core A55, with 8nm process design, up to 2.4GHz main frequency, integrated ARM Mali-G610 GPU, embedded high-performance 3D/2D image acceleration module, built-in NPU with 6Tops computing power, with 8GB (LPDDR4/4x), and up to 8K display processing capability..
  • Orange Pi 5 Single Board Computer provides abundant interfaces, including HDMI output, GPIO interface, M.2 PCIe2.0, Type-C, Gigabit LAN port, 2*USB2.0, 1*USB3.0, etc..
  • Orange Pi 5 microcontroller open source board mini computer can be widely used in tablets, edge computing, artificial intelligence, cloud computing, AR/VR, intelligent security, smart home and other fields, covering AIoT various industries..
  • Orange Pi 5 Mini PC supports Orange Pi OS, the official operating system developed by Orange Pi, as well as Android12 and Debian11..
  • Orange Pi Single Board Computers can builed a computer, a wireless server, Games, music and sounds, HD video, a speaker, Android, Scratch.Pretty much anything else, because Orange Pi is open source..
Check Stock

Raspberry Pi Zero Screen with Backlight Knob, iUniker 3.5 inch 60+ fps 480x320 Resolution Raspberry Pi Zero Touchscreen High Speed Pi Zero W Screen for Raspberry Pi Zero W 2/Pi Zero W/Zero 1.3

  • Fastest 3.5 inch Touchscreen for Raspberry Pi Zero WH / Zero w/ Zero W 2, Super HD 480x320 Resolution, 60+ fps.
  • Perfect fit your Pi Zero WH / Zero w/ Zero W 2, PORTABLE MONITOR.
  • Customized Circuit Board for 3.5-inch, high speed Raspberry Pi touchscreen.
  • Notice: Only Fit for Raspberry Pi Zero and Zero W/ Zero W 2.
Check Stock

Geekworm Raspberry Pi Zero/Zero W BadUSB USB-A Addon Board USB Connector V1.1 RPi0 to U Disk Expansion Board + Transparent Acrylic Case Kit

  • This addon board connects to a Raspberry Pi Zero (RPi0) or Zero W (Wireless) via pogo pins to provide a full sized, USB Type-A connector..
  • You can change Raspberry pi zero or Raspberry pi zero W as a U disk via P4wnP1 P4wnP1 project, and you use it as BadUSB device also..
  • With this type of setup you can have a portable device to execute Responder or PoisonTap type attacks..
  • P4wnP1 is a highly customizable USB attack platform, based on a low cost Raspberry Pi Zero or Raspberry Pi Zero W (required for HID backdoor)..
Check Stock