Reviews Optical Ferrule Flange

Monoprice S/PDIF (Toslink) Digital Optical Audio Cable, 6ft Black

  • Full sized male TOSLINK optical audio connectors at both ends.
  • Molded strain relief connectors reduce strain where the cable and connectors meet.
  • Gold plated ferrule resists corrosion and provides maximum protection for the connector tip.
  • Precision polished fiber tips for maximum signal transfer.
  • Plastic tip protectors attached to each end to protect the optical cable when not in use.
Check Stock

FiberCablesDirect - 3M OM2 LC SC Fiber Patch Cable | 1Gb Duplex 50/125 LC to SC Multimode Jumper 3 Meter (9.84ft) | Length Options: 0.5M-300M | 1gb 10gb mmf upc sfp+ 1gbase mmd dplx pvc ofnr om2-lc-sc

  • ...einforced, PVC jacket. | Education, Corporate, Military/Defense, Government, Healthcare, Finance and General Commercial, Computer Networking Applications..
  • Fiber Patch Cable Details: 3 Meter (9.84 feet), Duplex (2 fiber strands), 2.0 mm, Outer Diameter, Zip-Cord Reinforced, LC to SC Terminated, Multimode Fiber (MMF) Optical Patch Cable / Jumper Cord..
  • Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Modality Details for OM2 Ethernet Over Multimode Fiber: 500/500 MHz-km @850/1300 nm (OM2 - Laser-rated for GbE LANs) | 1Gb Ethernet Distance is 550 Meters at 850/1300 nm | 10Gb Ethernet Distance is 82 Meters at 850/1300 nm..
Check Stock

FiberCablesDirect - 12M OM1 LC LC Fiber Patch Cable | 1G Plenum Duplex 62.5/125 LC to LC Multimode Jumper 12 Meter (39.37ft) | Length Options: 0.5M-300M | Made In USA | 1/10g mmf sfp 1gbase ofnp lc-lc

  • Fiber Cable Description: OM1 LC to LC Plenum Fiber Patch Cable 12 Meter | OFNP Duplex LC LC Multimode Fiber (MMF) Patch Cable 62.5/125 Corning optical fiber core/cladding. Ceramic ferrule LC fiber connectors. High bandwidth fiber for high speed, low loss, data transmission. Orange, 2.0mm outer diameter, zip-cord reinforced, jacket. | Education, Corporate, Military/Defense, Government, Healthcare, Finance and General Commercial, Computer Networking Applications..
  • Fiber Patch Cable Details: 12 Meter (39.37 feet), Duplex (2 fiber), 2.0 mm, Outer Diameter, Zip-Cord Reinforced, LC to LC Terminated, Multimode Fiber (MMF) Optical Patch Cable / Jumper Cord..
  • Core / Cladding: Corning 62.5µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic cor....
Check Stock

Importer520 2 Packs Optical 3.5mm Female Mini Jack Plug to Digital Toslink M Audio Adapter

  • Premium High Quality Optical Toslink Gold Plated Connector.
  • Used for connecting devices with Toslink interface like amplifier, Blu-ray player etc..
  • Gold Plated Ferrule Prevents Corrosion And Provides For Maximum Protection Of The Fiber Tip..
  • Dust cap protects connector from contamination when not in use..
Check Stock

FiberCablesDirect - 1M OM1 LC LC Fiber Patch Cable | 1Gb Duplex 62.5/125 LC to LC Multimode Jumper 1 Meter (3.28ft) | Length Options: 0.5M - 300M | 1gb 10gb mmf lc-upc sfp 1gbase mmd dx pvc ofnr lc-lc

  • ...Finance and General Commercial, Computer Networking Applications..
  • Fiber Patch Cable Details: 1 Meter (3.28 feet), Duplex (2 fiber strands), 2.0mm Outer Diameter, Zip-Cord Reinforced, LC to LC Terminated (Max Connector Loss: 0.50 dB, Typical Connector Loss: 0.30 dB, Typical Return Loss -25 dB), Multimode Fiber (MMF) Optical Patch Cable / Jumper Cord..
  • Core / Cladding: Corning 62.5µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Modality Details for OM1 Ethernet Over Multimode Fiber: 1Gb Ethernet Distance of 300 Meters at 850 nm / 600 Meters at 1310 nm. 10Gb Ethernet Distance of 33 Meters at 850/1300 nm. OM1 Bandwidth is 160-200/500 MHz-km @850/1300 nm..
  • Durable Construction, Commercial Grade, Cost Effective and Built to Last | 100% Lifetime Warranty on All Fiber Cables Direct Products. Superior packaging for safe delivery anywhere in the world, using any available carrier and selected....
Check Stock

FiberCablesDirect 4Pk 1M OS2 LC LC Single Mode Fiber Patch Cables - 4 Pack | Duplex 9/125 LC to LC Singlemode Jumper Cord 1 Meter (3.28ft) | Pack Options: 2, 4, 6, 10, 12, 24 | Patch-Cord lc-lc

  • 4-Pack Fiber Cable Description: OS2 LC to LC Fiber Patch Cables, 1 Meter | Duplex LC LC Singlemode Fiber Patch Cable 9/125 Corning optical fiber core/cladding. Ceramic ferrule LC to LC fiber patch cable connectors. High bandwidth optical fiber for high speed, low loss, data transmission. Yellow 2.0mm outer diameter, PVC, OFNR jacket with zip-cord. | Education, Corporate, Military/Defense, Government, Healthcare, Finance and General Commercial, Computer Networking Applications..
  • Fiber Patch Cable Details: 4 pack – 1 Meter (3.28ft), SMF, Zip-Cord Reinforced, Singlemode LC to LC Fiber Patch Cable, Fiber Jumper Cords..
  • Fiber Cable Assembly: OFNR, Yellow Colored, 2.0mm outer diameter, riser rated, os2 fiber patch cable..
  • Core / Cladding: 9/125µm Corning Optical Fiber – 9 micron diameter fiber core / 125 micron diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Patch Cable Rating: OFNR Riser Rated Singlemode Duplex Fiber Opt....
Check Stock

Compression Sleeve Puller Tool Remove Ferrule & Nut Of Pipe, Ferrule Puller For 1/2” Copper Water Compression Sleeve & 1/2-Inch Copper Tubing, Plumbing Tools Compression Ring Removal Tool

  • 【No Damage To Walls & Copper & Supply Lines】This ferrule puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This compression sleeve puller removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this tool and make your life easy. Designed by plumbing professionals. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. Re-designed bullet nose will not pull off and is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Even such as the existing valve was severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut....
Check Stock

Compression Sleeve Puller (4661) - Remove Nut & Ferrule Of Pipe - Ferrule Puller For 1/2” Copper Water Compression Sleeve - 1/2-Inch Copper Tubing - Plumbing Tools Compression Ring Removal Tool

  • Saves A Lot Of Time--This ferrule puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. Saves a lot of time around cutting old pipes..
  • Make Your Life Easy--This compression sleeve puller removes 1/2-inch copper water compression sleeve. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple..
  • Operating Steps--Method 1: Only remove the ferrule---Let the ferrule in between the red notched end of the tool (notched clamping ferrule). Method 2: Both remove the compression nut and ferrule---Place red notched end of tool behind compression nut. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle..
  • Resistant & Wear Resistant.--Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe.Easy and fast solve the problem of compression valves failing with small leaks.Ideal for working on frozen or corroded supply stops,corrosion resistant &....
Check Stock

Rishine Yoga Pants with Pockets for Women, High Waist Tight Fitness Leggings Workout Elastic Quick Drying Sweatpants Black

  • Break the traditional installation method, ferrule type installation is environmental protection and reusable, easy to operate, convenient and free to disassemble..
  • When the ferrule and the screw and the female sleeve are inserted into the pipe body, when the nut is tightened, the outer side of the front end of the ferrule is attached to the taper surface of the connector body, and the inner blade is evenly glued to.
  • The double ferrule straight-through connector is a relatively common national standard connector, which acts as a connection between steel pipes. Has simple and firm connection with good sealing, no welding, high pressure resistance and vibration resista.
  • Especially suitable for complicated pipeline connections that cannot be welded, and pipeline systems that can pass gas, liquid, oil and general corrosion..
  • The ferrule connector is composed of three parts: the connector body, the ferrule and the nut..
Check Stock

ULTECHNOVO 10pcs Propane Natural Gas Connector 8mm Gas Pipe Fittings Brass Tube Fitting Adapter for Home Kitchen

  • Break the traditional installation method, ferrule type installation is environmental protection and reusable, easy to operate, convenient and free to disassemble..
  • When the ferrule and the screw and the female sleeve are inserted into the pipe body, when the nut is tightened, the outer side of the front end of the ferrule is attached to the taper surface of the connector body, and the inner blade is evenly glued to.
  • The double ferrule straight-through connector is a relatively common national standard connector, which acts as a connection between steel pipes. Has simple and firm connection with good sealing, no welding, high pressure resistance and vibration resista.
  • Especially suitable for complicated pipeline connections that cannot be welded, and pipeline systems that can pass gas, liquid, oil and general corrosion..
  • The ferrule connector is composed of three parts: the connector body, the ferrule and the nut..
Check Stock