Reviews Optic Fiber Splice Tray

6 Fiber Indoor Distribution Fiber Optic Cable, Multimode, 50/125 Micron, OM3, 10 Gbit, Aqua, Riser Rated, Spool, 1000 feet, CableWholesale

  • HIGH SPEED OPTIC CABLE: This Aqua 1000 Feet Spool of Fiber Optic Distribution Cable can be used for Indoor purposes. It is the right choice for you if you have large installation requirement of Short Run Range at 10 Gigabit Speed. It is used in vertical tray application without environmental air. The cable easily runs between floors through cable risers or in elevator shafts..
  • HIGH QUALITY FIBER OPTIC: Composed of 6 multimode fibers (50 micron core), wrapped inside Water-Proof Aramid Yarn and aqua PVC outerjacket, the cable is prevented from external damages and last for decades. This fiber optic cable is solidly constructed, UL rated and RoHS Compliant..
  • UNIVERSAL COMPATIBILITY AND COMPLIANCE: This Graded-Step Core Fiber optic is optimized to work with various fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cable is Riser Rated and is compliant with UL-1666, TIA/EIA 455-220A and IEC 60793-1-49. It also maintains compliance with legacy and LED based systems per TIA/EIA 455-204 and IEC 607-1-41..
  • SELF-EXTINGUISHING: Highly safe and Vertical Burn Tested. The wire prevents flames from travelling up the cable preventing fire damage to the facility..
  • LIFETIME WARRANTY: We are proud to offer lifetime warranty on our cables, ....
Check Stock

CableWholesale 2 Fiber Indoor/Outdoor Fiber Optic Cable, Multimode, 50/125 Micron, OM3, 10 Gbit, Black, Riser Rated, Spool, 1000 feet

  • HIGH SPEED OPTIC CABLE: This Black 1000 Feet Spool of Fiber Optic Distribution Cable can be used for both Indoor/Outdoor purposes. It is the right choice for you if you have large installation requirement of short range runs at 10 Gigabits Speed. It is used in vertical tray application without environmental air. The cable easily runs between floors through cable risers or in elevator shafts..
  • HIGH QUALITY FIBER OPTIC WITH TIGHT BUFFER PROTECTION: Composed of 2 multimode fibers (50 micron core), wrapped inside Water-Proof Aramid Yarn and black PVC outerjacket, the cable is prevented from external damages and last for decades. This fiber optic cable is solidly constructed and meets EU RoHS and REACH Directive Standards..
  • UNIVERSAL COMPATIBILITY AND COMPLIANCE: This Graded-Step Core Fiber optic is optimized to work with various fiber optic equipment using light wave lengths of 850nm (nanometers) or 1300nm. The cable is Riser Rated (CMR) and is compliant with UL-1666, TIA/EIA 455-220A and IEC 60793-1-49. It also maintains compliance with legacy and LED based systems per TIA/EIA 455-204 and IEC 607-1-41..
  • SELF-EXTINGUISHING COMPONENTS FOR SAFETY: Highly safe and Vertical Burn Tested. The wire prevents flames from travelling up the cable preventing fire damag....
Check Stock

18 in 1 FTTH Fiber Optic Tool Kit with FC-6S Cleaver Optical Power Meter Visual Fault Locator Finder Cable Cutter Stripper 5km

  • PRECISE CLEAVING: Provides a cleave with a cutting angle of less than 0.5° for optimal fiber preparation for fusion splicing.
  • BUILT-IN FIBER HOLDER: The fiber cleaver can hold 250µm and 900µm fiber with a readable scale for accurate cleave lengths from 5 to 20mm and also has a built-in trash can for easy disposal.
  • VERSATILE USE: Ideal for field splicing applications, splicing trucks, laboratories, fiber technicians, fiber splicers, and anyone that needs to cleave a fiber optic cable prior to performing a fusion splice.
  • HIGH DURABILITY: Lightweight and rugged design for longer life and increased durability.
  • REPLACEMENT BLADES: Replacement blades (Part#: FC-500RB) available.
Check Stock

Fiber Optic Wands (Box of 48) - Fiber Optic Wand with 3 Light Modes (White)

  • White Fiber Optic Wands - Bulk Box of 48 Fiber Optic Wands.
  • WHITE FIBER OPTICS: Elegant white glowing fiber optic strands make these fiber optic wands popular for wedding send-offs, anniversary celebrations and white dress events. These Fiber Optic Light Sticks are 13 1/2 Inches in length. This package includes 48 bright fiber optic light stick wands..
  • 3 LIGHT MODES: Each White Fiber Optic Wand has 3 different light modes that include Steady Light Mode, Fast Flashing Mode and a Slower Flashing Mode..
  • BATTERIES INCLUDED: White Glowing Fiber Optic Wands each come with pre-installed batteries and are ready to go right from the package. Simply remove the battery protection tab and press the button to turn the White Fiber Optic Wand on..
  • USES: Fiber optic wands for Wedding Send Off, LED Sparkle Sticks, Festivals, Christmas Party Light Wands, New Years Glow Wands, Concerts, Sporting Events, Glow Party Light Sticks and Entertainment. Fantastic for Glow Party Celebrations and as light up sparkler glow wands for wedding send off..
Check Stock

Fiber Optic Jacket Stripper Coaxial Cable Stripping Cutter Tool Cable Cutter Crimper 45-163 + 45-162

  • ADJUSTABLE BLADES - This fiber optic buffer tube stripper has adjustable blades that you can set for any depth to ensure nick-free jacket entry into fiber optic buffer tubes.
  • EASY TO USE - This fiber optic stripping tool provides a comfortable and secure grip that helps make the fiber optic stripping process easy and efficient.
  • FIBER OPTIC STRIPPER - CATV UTP/STP Fiber optic stripper used for stripping simplex fiber and a variety of fiber optic cable. 45-162: for (0-1/8") / (0-3.2mm) Coaxial Cable, 45-163: for (1/8-7/32") / (3.2mm - 5.6mm) Coaxial Cable..
  • WIDELY APPLICABLE - Fiber optic tools can also be used to screen twisted pair cable, Twisted stranded cable, CATV cable, CB cable, SO, SJ, SJT and other types of flexible power cord.
  • UNIQUE DESIGN - 45-162 / 163 coaxial stripper is easy to carry and use. It is very suitable for family or daily use..
Check Stock

FC-6S Optical Fiber Cleaver Stripping Cutter Tool Cleaves for SUMITOMO with 36000 Cleaves and Coating Diameter: 250μm - 900μm 12 Position Blade Cold Connection Tools Fiber Equipment Used in FTTH

  • FC-6S Optical Fiber Cleaver Stripping Cutter Tool Cleaves Used in FTTH, Applicable fibers: Single-Mode or Multimode Silica optical fiber.★ Cold Connection Tool Equipment Bare fiber diameter:125um,Coating diameter:250-900um.
  • Cleaving angle: 0.5-0.8 degrees with single fiber..
  • Replicable Blade: Contained 16 Position Rotatable blades, Blade life: Provides approximately 48000 times (100*16*3) cleaves.★ Durability & Compact body: High hardness aluminum alloy materials, Lightweight and rugged design for longer life and increased durability..
  • Scientific Design: The fiber cleaver Built-In Fiber Holder can hold 250μm and 900μm fiber with a readable scale for accurate cleave lengths from 5 to 20mm and also has a built-in trash can for easy disposal..
  • High Precise Cleaving: Provides a cleave with a cutting angle of less than 0.5°for optimal fiber preparation for fusion splicing, Coating Diameter: 250um ~ 900um buffer fiber. Large & small adjustable knife, easy to operate. Non-slip bottom,easy to use..
  • Wide Application: Ideal for field splicing applications, splicing trucks, laboratories, fiber technicians, fiber splicers, and anyone that needs to cleave a fiber optic cable prior to performing a fusion splice..
Check Stock

Winzwon Car Led Lights Interior 4 Pcs 48 Led Strip Light for Car with USB Port APP Control for iPhone Android Smart Phone Infinite DIY Colors Music Microphone Control

  • ▸【10 Meters (32.81ft) Optic Fiber Band Car Ambient Lights Interior】 Sewing edge: 3.0mm. Led Power: 1W (DC 12V)..
  • ▸【Flexible & Cuttable Optic Fiber Cable】 With 0.5mm thickness fin easily fix the fiber optic into the gag of door panel. With 1mm clip makes the fiber optic coincide with the gap of door panel, firm, not easily fall off. The optic fiber pipe can be cut for your needs..
  • ▸【Simple Fiber Optic Installation】 Step 1: Using the scraper to fix the fiber optic into the gap of door panel. Step 2: When cutting, make sure that 12mm is fully inserted into the light source, and then cut the fin. Step 3: Fix it with a screwdriver, take care not to tighten it, otherwise it will not transmit light..
  • ▸【Usage】 For all kinds led fiber optic illumination engine and decoration such as optical fiber hanging lamps, ar interior decoration, Artistic adornment in graphical and 3D artistic design.
  • Interior fiber optic light decoration of KTV, pubs, coffee houses, hotels and restaurants and so on..
  • ▸【Safe to Use】 IP68 Waterproof, Environmental protection, low power consumption, high brightness, extremely low heat, touchable and safe for children. Package included: only 6mts optic fiber (not including the LED light sources)..
Check Stock

FTTH Fiber Optic Tool Kit 18 in 1 with Fiber Optical Power Meter and 1KMVisual Fault Locator and Cable Cutter Stripper Tool 6C Fiber Cleave Multi-Function Equipment Tool

  • aluminum alloy visual fault locator fiber optic cable tester meter for CATV test Universally connector for test different ST,SC,FC interfaces.
  • Handheld fiber optical power meter FC SC cable tester, Wavelength range: 800~1700,Power measurement range: -70~+10.
  • 6C High Precision Fiber Cleaver is an instrument for high precision fiber cutting.It is a multi-purpose optical fiber cutter, the product uses the 16 cutting points and has a longer service life ..
  • FTTH fiber optic drop cable stripper is used to peel 250FTTH fiber optic drop cable stripper is used to peel 250FTTH fiber optic drop cable stripper is used to peel 250 coating of 125 fiber optic coating of fiber optic coating of fiber optic.
Check Stock

WANLUTECH OTDR Tester CCTV Tester, 1310/1550nm OTDR Fiber Optic Tester 8'' Touchscreen Built-in DMM OPM OLS VFL Event Map Support TVI CVI AHD IP CVBS Camera Test PoE/HDMI in/RJ45 Cable TDR Test

  • ...uilt-in 8G TF card memory, can store a large amount of curve data..
  • ✅【Network & Camera Test】WANLUTECH MT-8000 is not only an OTDR tester, but also a CCTV tester.It can measure the optical fiber length, transmission attenuation of optical fiber, attenuation of the splice, and failure location, etc. As well, built in camera tester for maintenance and installation of IP analog, HD coaxial cameras.It also comes with a digital cable tracer.Support searching for BNC cables, network cables and telephone cables from a mess of cables..
Check Stock

Fiber Cutter Stable Performance High Automatic Blade Return Lightweight Fiber Cutter (Orange)

  • Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
  • High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
  • Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do term use..
  • Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
  • Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..
Check Stock