Reviews Operation System

Crazy Sales CNC Lathe Controller, Numerical Control System, High Precision for Program Editing Program Reading(Four axis)

  • You can directly use the USB cable to power the system, which is convenient for the transmission of the boot screen and the program, learning and operation.
  • Isolated IO port means that with input and output ports isolated from the system, the output port capacity can be up to 1A.
  • Direct output terminal interface on the back reduces the transfer board, the terminals on the back can be directly wired, clear and convenient, which saves costs.
  • With 20 control commands, external manual supports control motor CW /CCW, start, pause, alarm, emergency stop, etc..
  • Supports automatic operation including dry running and single-step running, CNC lathe controller 's manual operation including motor CW /CCW, back to program 0, back to mechanical 0 and output control..
Check Stock

Low Noise CNC Lathe Controller, Simple Operation Numerical Control System, for Program Editing Program Reading(Dual axis)

  • You can directly use the USB cable to power the system, which is convenient for the transmission of the boot screen and the program, learning and operation.
  • Isolated IO port means that with input and output ports isolated from the system, the output port capacity can be up to 1A.
  • Direct output terminal interface on the back reduces the transfer board, the terminals on the back can be directly wired, clear and convenient, which saves costs.
  • With 20 control commands, external manual supports control motor CW /CCW, start, pause, alarm, emergency stop, etc..
  • Supports automatic operation including dry running and single-step running, CNC lathe controller 's manual operation including motor CW /CCW, back to program 0, back to mechanical 0 and output control..
Check Stock

Straight Shank Tool Holder, 45-46HRC Hardness 1-7mm Clamping Range 40Cr and Carbon Steel CNC Milling Extension Rod for Lathe Device(C16-ER11A-100L)

  • Supports automatic operation including dry running and single step operation, manual operation of the CNC lathe control including motor CW/CCW, back to program 0, back to mechanical 0 and output control..
  • The interface of the direct output terminals on the back reduces the transmission board. The terminals on the back can be directly wired, clear and convenient, which saves costs.
  • Isolated I/O port means that with input and output ports isolated from the system, the output port capacity can be up to 1A.
  • You can power the system directly using the USB cable. This is practical for the transfer of the start screen and the program as well as for learning and operation.
  • With 20 control commands, the external manual supports the control motor CW/CCW, start, pause, alarm, emergency stop etc. The parameters of the CNC lathe control include system parameters, system self-test, I/O settings, user and manufacturer password management etc. and it supports also editing, reading, deleting and saving programs..
Check Stock

Mechanical Tool Aluminum Alloy Synchronous Wheel XL Type 25 Teeth Power Transmission Accessories for Milling Machine for Drilling Machine for CNC Engine Lathe(25 Teeth 5mm Hole XL synchronous Wheel)

  • Supports automatic operation including dry running and single step operation, manual operation of the CNC lathe control including motor CW/CCW, back to program 0, back to mechanical 0 and output control..
  • The interface of the direct output terminals on the back reduces the transmission board. The terminals on the back can be directly wired, clear and convenient, which saves costs.
  • Isolated I/O port means that with input and output ports isolated from the system, the output port capacity can be up to 1A.
  • You can power the system directly using the USB cable. This is practical for the transfer of the start screen and the program as well as for learning and operation.
  • With 20 control commands, the external manual supports the control motor CW/CCW, start, pause, alarm, emergency stop etc. The parameters of the CNC lathe control include system parameters, system self-test, I/O settings, user and manufacturer password management etc. and it supports also editing, reading, deleting and saving programs..
Check Stock

Pontoon [Explicit]

  • 【Easy Operation】Features 360 degree steering rotation for reverse without gear shifting. Twist grip throttle handle and engine stop button for improving response and saving time..
  • 【High Performance】Max.speed(r/min): 4500-5500,Displacement: 169CC,Gear ratio: 2.08(27:13),Control System: Tiller control,Starting System: Manual start,Control System: #93 gasoline.Recommended Propeller range: 3 -9"1/4''x8",Recommended Lubricant: 2 Stroke Lubricating oil,Mixing ratio: Fuel:oil=50:1,Trim and tilt system: Manual Tilt,Standard fuel tank capacity: 24L.
  • 【12HP 2 Stroke Outboard Boat Motor】Using 2 Stroke Power, 12HP boat motor: Air Cooling Technology To Improve The Reliability Of The Whole Machine.Convenient Use,Easy Operation And Convenient Maintenance: Travel Safer,More Reliable,More Corrosion Resistant,More Beautiful,More Durable,More Energy Efficient,More Environmentally Friendly..
  • 【Durable】Superior outboard anti corrosion system and anodes for increased durability. Durable cast aluminum construction for superior corrosion protection, suitable for both freshwater and saltwater..
Check Stock

CNC Lathe Control, 150 kHz Frequency Controller with Maximum Pulse Output Automatic 0 Operation 32-bit CPU Numerical Control System Metalworking Equipment(Four axis)

  • You can directly use the USB cable to power the system, which is convenient for the transmission of the boot screen and the program, learning and operation.
  • Isolated IO port means that with input and output ports isolated from the system, the output port capacity can be up to 1A.
  • Direct output terminal interface on the back reduces the transfer board, the terminals on the back can be directly wired, clear and convenient, which saves costs.
  • With 20 control commands, external manual supports control motor CW /CCW, start, pause, alarm, emergency stop, etc..
  • Supports automatic operation including dry running and single-step running, CNC lathe controller 's manual operation including motor CW /CCW, back to program 0, back to mechanical 0 and output control..
Check Stock

CNC Lathe Control, 150 kHz Frequency Controller with Maximum Pulse Output Automatic 0 Operation 32-bit CPU Numerical Control System Metalworking Equipment(Single axis)

  • Direct output terminal interface on the back reduces the transfer board, the terminals on the back can be directly wired, clear and convenient, which saves costs.
  • You can directly use the USB cable to power the system, which is convenient for the transmission of the boot screen and the program, learning and operation.
  • Isolated IO port means that with input and output ports isolated from the system, the output port capacity can be up to 1A.
  • With 20 control commands, external manual supports control motor CW /CCW, start, pause, alarm, emergency stop, etc..
  • Supports automatic operation including dry running and single-step running, CNC lathe controller 's manual operation including motor CW /CCW, back to program 0, back to mechanical 0 and output control..
Check Stock

Makita LS1219L 12\ Dual-Bevel Sliding Compound Miter Saw with Laser

  • Unique 2-steel rail sliding system design offers single slide-glide operation.
  • reduced saw footprint allows operation flush against a wall.
  • Increased capacity for up to 8" Crown molding (vertically nested), 6-3/4" baseboard (vertical), and 15" crosscuts at 90.
  • In-front bevel lock for convenient operation.
  • Dual dust collection ports provide excellent dust extraction performance.
  • Innovative direct drive motor and guard system is engineered for increased vertical cutting capacity (6-3/4").
Check Stock

Air King BFQ 110 BFQ110 Exhaust Fan, 100-CFM

  • White, polymeric grill measures 10 x 10-Inch, with durable high-impact plastic housing for quiet operation and enhanced performance.
  • Operates at 100 CFM at 3.5 scones, Features a special snap-in installation system for easy in-ceiling installation.
  • Comes with 4-Inch plastic duct collar with back draft damper for quiet operation and draft protection.
  • Can handle continuous operation, is rated for ceilings insulated to R-40, Culus-listed, HVI 2100-certified, Title 24 compliant, ASHRAE 62.2 approved, and UL-listed for installation over a tub or shower on a GFCI circuit.
  • Easily installs using the included snap-in mounting system, High performance ventilation at a budget friendly price.
  • Plastic housing is quiet and will not rust, perfect for areas near salt water or with high moisture, Right or left hand ducting.
  • Easily installs using the included snap-in mounting system.
  • High performance ventilation at a budget friendly price.
  • Plastic housing is quiet and will not rust, perfect for areas near salt water or with high moisture.
Check Stock

RW-4 RW-8 RW-15 RW-20 Powerhead Wave Making Pump Aquarium Fish Tank Jebao Jecod RW-4 US

  • [Unique control System] multiple wave style and function, meet different wave patters..
  • [Wireless control] To synchronize the wave makers operation through one controller, multiple control..
  • [Low voltage] Low voltage DC brushless electronic motor, provide a safe using environment..
  • [Easy operation] Easy operation display to achieve multiple dynamic effect. 180 degree to adjust the outlet flow direction..
  • [Wide range voltage input] suitable for various power grid system, avoid the voltage fluctuation to impact the wave effect..
Check Stock