Reviews Oils Fluids - BestBuyersPro.com

TRUEGARD Hydraulic Oil AW 32 55-Gallon Drum

6,000 HOUR SEVERE SERVICE - Extremely long life fluid with very long oxidation life. Three times the life of most other fluids..
ANTI-WEAR BOOSTER PACK - Contains a built-in severe service, anti-wear booster pack. Three times the zinc of most other hydraulic oils..
HIGH VISCOSITY INDEX - Ultimate durability in all types of service. It does not overheat, it prevents hydraulic cavitation, maintains fluid seals on pistons, and does not shear..
DIRECT OEM FLUID REPLACEMENT for CAT HYDO 10 and CAT HYDO 10 Advanced OEM fluids..
ZERO FOAMING - Virtually zero foaming on all industry-standard tests and ultra-rapid air release. SAVES 40%- 80% on fluid costs annually versus regular or economy hydraulic oils..

For use across a wide temperature range from -30 degrees F to 250 degrees F, Good/Excellent resistance to many petroleum oils/greases, hydraulic fluids, alcohol, mineral oil and grease.
Oil resistant applications of all types. Low temperature military uses. Off-road equipment. Automotive, marine, aircraft fuel systems.
Compatible with Aliphatic Hydrocarbons (propane, butane, petroleum oil, mineral oils and greases, diesel fuel and fuel oil).
Not Compatible with product fuels with a high aromatic content.
Chlorinated hydrocarbons (Trichloroethylene).
Buna N or Nitrile has good mechanical properties when compared with other elastomers and high wear resistance. Good/Excellent resistance to many petroleum oils/greases, hydraulic fluids, alcohol, mineral oil and grease.

6,000 HOUR SEVERE SERVICE - Extremely long life fluid with very long oxidation life. Three times the life of most other fluids..
ANTI-WEAR BOOSTER PACK - Contains a built-in severe service, anti-wear booster pack. Three times the zinc of most other hydraulic oils..
HIGH VISCOSITY INDEX - Ultimate durability in all types of service. It does not overheat, it prevents hydraulic cavitation, maintains fluid seals on pistons, and does not shear..
DIRECT OEM FLUID REPLACEMENT for CAT HYDO 10 and CAT HYDO 10 Advanced OEM fluids..
ZERO FOAMING - Virtually zero foaming on all industry-standard tests and ultra-rapid air release. SAVES 40%- 80% on fluid costs annually versus regular or economy hydraulic oils..

Translucent High-Density polyethylene construction.
Polyethylene Dust cap to keep out debris.
Excellent for transferring Engine Oils, Transmission Oil, Wiper Fluids, other Automotive Fluids.

Sensor-safe, low odor, and non-corrosive..
Maximum vibration resistance, with outstanding resistance to oils, cooling fluids, and shop fluids. 15% more flexible than Ultra grey..
Maximum temperature resistance: -65F to 700f(-54 DegreeC to 371 DegreeC) intermittent. 40% higher Temp. Than Ultra grey..
The most Advanced, high Temp RTV silicone gasket maker Available..

20 mL polypropylene syringes with secure Luer Lock applicator nozzles and caps for drop by drop application of oils, lubricants, adhesives, inks, paint, perfume, flux, and essential oils. Each syringe has a clearly marked ml scale for accurate measurement of fluids which makes it ideal for measuring additives for 2 cycle engine fuel mixes..
Each applicator nozzle comes sealed with a break-away cap on the end. Simply break the cap off, reverse it and use it to seal the end of the applicator tube. The applicator tube connects to the syringe body with a secure Luer Lock twist-on connection..
The syringes feature a polypropylene body and plunger with a vinyl seal. Using volatile solvents and corrosive chemicals such as, but not limited to, lacquer thinner and acetone should be avoided, and a 24-hour compatibility test is advised for any fluids that fit this category. Appropriate safety gear such as gloves and eye protection should be used at all times..
These syringes are NON-STERILE and are intended for industrial and hobby use. The ability of the syringe to work easily is directly dependent on the viscosity of the fluid. Thin fluids work well, thick ones can become problematic..
The set includes six (6) syringes and six (6) nozzles with break-away caps..

MANUAL FLUID VACUUM PUMP: Drain and fill automotive fluids and oils directly from the neck or reservoir.
Our manual oil pump extractor features two....
EXTREMELY VERSATILE: Designed to be chemical and oil resistant for multiple applications.
Use our fluid extractor automotive tool on transmission,....
EASY TO USE: Our manual oil transfer pump is easy to use.
Open the reservoir or neck on for fluid or oil extraction/filling and place the hose into....
DIAGNOSTIC TOOL: Checking the health of your fluids and oils is easy with our oil evacuator pump.
The translucent 7oz cylinder dual scale body is....
NO LEAK OPERATION: Our manual extraction pump features two gaskets to keep your oil and fluid extraction jobs leak and mess free.

RELIABLE ADHESION. This high temp silicone sealant works on all metals, including passive substrates (e.g. stainless steel, aluminum, plated surfaces). Resists cracking, shrinking & migrating..
FLEXES WITH MOVEMENT. Enhances load bearing & shock absorbing characteristics of the bond area. Eliminates the need for preformed, paper, rubber & cork gaskets..
INCREASED OIL RESISTANCE. Tolerates contamination by oils (e.g. motor oils, corrosion protection oils, cutting fluids)..
IMMEDIATE CURING. Operating strength of 15 PSI within 1 minute of application. Equipment can return to service immediately!.
LOCTITE READY GASKET replaces almost any cut gasket or coat pre-cut gaskets to increase reliability..

PUMPS A VARIETY OF FLUIDS - For use with non-corrosive fluids, automotive, agricultural and industrial fluids such as motor oil, transmission fluid, gear oil, engine coolant, silicone oils, and more (not suitable for gasoline)..
FITS STANDARD DRUMS - Two-tier threaded bung fits standard 2-inch and 1.5-inch metal and plastic drums.
IMPRESSIVE OUTPUT - The 1340 lever-action pump produces 14 oz. per stroke..
NO DRIPPING - The outlet discharge spout has a built-in aluminum die cast non-drip attachment and can be removed to allow attachment of a garden hose..
DURABLE DESIGN - Premium powder-coated steel pump body with an aluminum die cast pump head for durability..

Extremely slick, dry film lubricant coating.
Remarkably durable compared to many other lubricant materials.
Can be used with petrochemical oils, greases, synthetic oils, silicone lubricants, and hydraulic fluids.