Reviews Oil Well Pump Sucker

Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover

  • 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
  • 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area..
  • 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time..
  • 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while....
Check Stock

Mogaopi Desoldering Wick, Desoldering Pump, Solder Sucker, Solder Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length) Solder Wire, Replacement Tip, Desoldering Vacuum Pump Solder Removal Tool

  • ... 2 pcs Desoldering Wire, 1pcs Solder Wire, 1pcs Desoldering Pump, 1pcs Replacement Tip, 1pcs Protective Tube(15cm Length), a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts..
  • Desoldering Wick with Copper Braid - Solder wire, replacement tip, 2pcs solder braid (3.5mm/2.0mm Width, 1.5m Length). 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder..
  • 【One-handed solder sucker with powerful suction】: Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome..
  • ABS Body with Non-slip Sponge and Nylon Nozzle Solder Wick - The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold. Right or Left handed design allows easy one-handed use..
  • 【Widely used Solder Remover】:The Desoldering Wick & ....
Check Stock

TOWOT Desoldering Pump Solder Sucker,2PCS Desoldering Vacuum Pump Solder Remover Tool

  • Solder Sucker with Super Suction: With a desoldering pump designed with a double ring and a "vacuum" button, you can easily remove the solder on the circuit board by tilting it up and pressing the button with one hand..
  • High-Quality Materials: The desoldering vacuum pump is made of high-quality ABS material, coated with a sponge, non-slip and heat-absorbing, nylon nozzles, anti-static and heat-resistant. Comfortable grip and durable..
  • Widely Used: Desoldering pumps can be used to correct small board errors on the PCB, re-soldering and desoldering, removing relays and other components from the printed circuit board, etc. To meet your various soldering needs..
  • Best assistant: Solder pump adopts high-efficiency tin scraping method, which is easy to remove tin debris from the suction nozzle and not easy to block. The solder sucker can be used for both broad and small places, hard to reach areas..
  • Value Package: 2PCS desoldering pump , commonly used soldering tools, improve your work efficiency. 30 days no reason to return or exchange, please feel free to contact us if you have any questions!.
Check Stock

TOWOT Desoldering Pump Solder Sucker,3PCS Desoldering Vacuum Pump Solder Remover Tool

  • Solder Sucker with Super Suction: With a desoldering pump designed with a double ring and a "vacuum" button, you can easily remove the solder on the circuit board by tilting it up and pressing the button with one hand..
  • High-Quality Materials: The desoldering vacuum pump is made of high-quality ABS material, coated with a sponge, non-slip and heat-absorbing, nylon nozzles, anti-static and heat-resistant. Comfortable grip and durable..
  • Widely Used: Desoldering pumps can be used to correct small board errors on the PCB, re-soldering and desoldering, removing relays and other components from the printed circuit board, etc. To meet your various soldering needs..
  • Best assistant: Solder pump adopts high-efficiency tin scraping method, which is easy to remove tin debris from the suction nozzle and not easy to block. The solder sucker can be used for both broad and small places, hard to reach areas..
  • Value Package: 3PCS desoldering pump , commonly used soldering tools, improve your work efficiency. 30 days no reason to return or exchange, please feel free to contact us if you have any questions!.
Check Stock

HighTop Automatic Desoldering Pump Vacuum Solder Sucker Tool Portable AC110V 30W Electric Desoldering Gun Repair Solder Removal Tool Solder Sucker Iron Tin for DIY with 3 Soldering Suction Tips

  • 【 Strong suction】 This desoldering pump with Strong suction . hollow tip design makes desoldering through-hole components a breeze ..
  • 【 Perfect desoldering tool】This desoldering tool for thick-film integrated circuits and large components with big welding joints.It pulls the solder right away leaving a clean solder pad..
  • 【Heat up Quickly 】Solder sucker Power source 110V 30W with US Plug let it warm up 5 minutes , and press the side button for suction Note :The item is not full-automatic, you need to use heating equipment together as assist.
  • 【 Price is cheaper and 3 Soldering Suction Tips】Desoldering suction pump is less expensive, but it does its job well enough.
  • 【Widely Used As You Want】soldering sucker iron Tool is widely used for welding circuit board, appliance repair, Home DIY hobby, jewelry welding. You can take it anywhere and you will be able to find the tools you need in the carry bag.
  • 【DIY】 it is a stand alone unit. Simply plug it in, let it warm up, and press the side button for suction.
  • 【Easy Operate】hollow tip design makes desoldering through-hole components a breeze.
Check Stock

3 Pcs Solder Sucker Desoldering Vacuum Pump Solder Removal Tool

  • 【High Quality and Powerful Sunction】The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively and you can use your thumb to reset and suck..
  • 【One-Handed Use Design】 The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready..
  • 【 Sturdy and Perfect Tool】Worke good to remove existing solder from a circuit board, heated up the solder pushed the button and bam,all solder sucked up,super easy to use for desoldering..
  • 【Great Solder Removal Tool】 The solder sucker can be used for broad place, a must have excellent solder sucker which fits nicely in your tool box..
  • 【Lifetime Satisfaction Guarantee】If you're not happy we're not happy! If we can't make it right and you are not satisfied for any reason, we will gladly and promptly refund your purchase price. We promise! Click "Add to Cart" now..
Check Stock

Teenitor Solder Sucker Desoldering Vacuum Pump Solder Removal Tool 3pcs/Pack Desoldering Pump Soldering Sucker Tool

  • UNPARALLELED SUCTION POWER - Good little solder sucker, have a good bit of suction,you can just hang onto it and use your thumb to reset and suck. The ideal tool for intricate soldering jobs..
  • ONE-HANDED OPERATION - Simple design allows easy one-handed use,lightweight and compact,suck the solder away easily. Say goodbye to tedious two-handed solder extraction and .quickly and easily removing solder.
  • DURABILITY AND LONGEVITY - Very sturdy,will worke good to remove existing solder from a circuit board. Made with high-quality materials and designed to withstand heavy usage, our Solder Sucker ensures longevity and performance, saving you time and money in the long run..
  • ERGONOMIC DESIGN - Heated up the solder pushed the button and bam,all solder sucked up,super easy to use for desoldering. The comfortable, non-slip handle and lightweight body make our Solder Sucker easy to handle, ensuring maximum control and precision..
  • VERSATILE APPLICATIONS - A must have excellent solder sucker which fits nicely in your tool box. Our solder sucker desoldering pump is not just limited to soldering. It can also be used for desoldering, removing hair, lint, and dust, and even for cleaning delicate electronics. The ultimate multi-purpose tool for any DIY enthusiast..
Check Stock

VIRALLOY Solder Sucker No Clog Desoldering Pump Perfect Desoldering Tool for Solder Remover with Strong Vacuum Suction Heat Resistant Taper Nozzle for Smooth Solder Inrush & Pre-cut Silicone Tubes

  • ✅ No Clog Design: The VIRALLOY Solder Sucker Desoldering Pump has a unique design that prevents clogging of the nozzle tip. This allows you to quickly remove solder without having to stop and clean out the nozzle tip.
  • ✅ Streamlined: The solder removal tool quickly extracts molten solder and leaves a clean working area.
  • ✅ Sturdy: This solder pump sucker is built with premium 6061 aircraft-grade aluminum for maximum durability.
  • ✅ Self-Cleaning: Pressing plunger cleans the nozzle unit ejecting solder waste from the desolder pump.
  • ✅ Convenient: Aluminum desolder tool designed to be easily used with one hand, leaving the other free to manipulate the board or heat source.
Check Stock

LampVPath (Pack of 4) All Aluminum Alloy Solder Sucker Desoldering Pump, Vacuum Solder Sucker Removal Tool for Desoldering

  • 4 pcs solder suckers are included in the package..
  • The body frame of the desoldering solder sucker is aluminum, the buttons and head of the desoldering pump is made of hard plastic..
  • This solder sucker tool is one-handed use designed: it can be handled easily with one hand, whatever left or right hand, just hold the desolder pump and only use your thumb to set position and trigger to operate..
  • This solder remover has the powerful suction, the high pressure vacuum can remove solder from a printed circuit board effectively..
  • This solder removal tool is lightweight and compact. Weight: 29g/1.02oz.
  • Size(Length*Diameter):7.32Inch/18.6CM*0.75Inch/1.9CM.
Check Stock

TABIGER Desoldering Wick & Desoldering Pump, 3 Pcs Solder Sucker & 2 Pcs Solder Wick(2.5mm Width, 1.5m Length), Solder Remover Kit for Desoldering

  • 【ONE-HANDED USE DESIGN】 The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready..
  • 【HIGH QUALITY AND POWERFUL SUNCTION】 The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively..
  • 【ALLOY BRAIDED SOLDER WICK】 Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas..
  • 【DURABLE DESOLDERING IRON TOOL】 The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time..
  • 【A MUST-HAVE SOLDER REMOVAL KIT】 The solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards..
Check Stock