Reviews Oil Top Drive Machine

JUKI MO-6714S Industrial 4-Thread Overlock Sewing Machine

  • ✅Thank you! see below full info. on this machine,--- Get your sewing job done real fast with the Juki DDL-8700H sewing machine that can do up to 5500 stitches per minute. This Juki sewing machine has a large 11-inch arm space that lets you work with even large quilts. The stitch length of this 5500 SPM sewing machine goes up to 5mm which gives you a lot of freedom in doing your job..
  • ✅The sewing machine complies with the "Juki Group Green Procurement Guidelines" on the use of hazardous substances, will be delivered in 3 boxes. 1) machine head, & some accessories* 2) servo motor & v belt 3) table top/legs/drawer/*2 spool-Thread Stand Bobbin Winder Oil Pan/Knee Lifter 1 Bobbins 1 Needles Instruction Manual Screw Driver Machine Oil 2-Euro Hinges & 2 Euro Rubber Mounts Table Rest Pin Safety Belt Guard.
  • ✅1) machine head, & some accessories* 2) servo motor & v belt 3) table top/legs/drawer/*2 spool-Thread Stand Bobbin Winder Oil Pan/Knee Lifter 1 Bobbins 1 Needles Instruction Manual Screw Driver Machine Oil 2-Euro Hinges & 2 Euro Rubber Mounts Table Rest Pin Safety Belt Guard.
Check Stock

Motivx Tools MX2326-US 86.6mm 16 Flute Precision CNC Machined Aluminum Oil Filter Wrench Compatible with Most BMW and Volvo Engines with 86mm Cartridge Style Oil Filter Caps

  • This 86.6mm 16 flute oil filter wrench is compatible with BMW and Volvo engines that have a smooth top oil filter cap. It will not fit caps with a 6 point nut on top. Not recommended for 2014 and newer Volvo 2.0 liter 4 cylinder turbo engines..
  • This oil filter wrench is proudly made in the USA. It is precision CNC machined from solid aluminum and includes a manufacturers lifetime warranty..
  • The main body of the wrench is made from 6061-T6 aluminum and anodized grey while the drive hub is made from 7075-T6 aircraft aluminum for ultimate strength and anodized red for better visibility..
  • The wrench can be operated with a 3/8” drive ratchet or extension, or a 24mm socket..
Check Stock

4HP Outboard Motor Boat Engine, 4 Stroke Heavy Duty Outboard Motor Fishing Boat Engine with Water Cooling System (4-Stroke 4HP)

  • ...marched with inflatable boats, rubber boats or fishing boats. ( Tips:The running-in period is about 10 hours or one month. Do not drive at high throttle during the running-in period.
  • Change the engine oil and gear oil after the running-in period, and the second change time is about 100 hours or six months later.
  • The machine must be erected in a reliable place when not in use.).
Check Stock

Car Diffuser, Vyaime Essential Oil Diffuser for Car Home, USB Aromatherapy Diffuser Car Humidifier with 7 Colors Lights Auto Shut-Off for Office Travel Vehicle(BlackGrey)

  • Upgraded Version Car Oil Diffuser: New 2nd version, real aromatherapy essential oil diffuser, ultrasonic technology, no sponge wicks needed and make more fine fragrance & vapor. Fit in car cup holder, one button on top for handy operating when drive, perfect device to improve air quality and enjoy aromatherapy spa in car, much helpful during long drive or traffic jam.
  • Compact And Compatible: Palm sized USB aromatherapy diffuser will not occupy your much space, pack this portable diffusers in carry-on and take it anywhere. This lightweight oil diffusers will be compatible with various decor, enjoy humidification, fragrance and better breath in office, conference room, outdoors, living room, bedroom, baby room, spa romm, yoga and more.
  • Smart Mist Mode: The humidifiers can work on continuous or intermittent mode, mists and pauses every 30s, keep run in at least 5 hours covering the whole driving time. It will auto shut-off once water runs out, freeing you the concern of dry burning. Weak noise so you will ignore it's spraying when drive, quiet and snug experience in your daily journey.
  • Safe USB Power: USB power supply is easier charging, connected to lap top, desk top computer, power bank or simple cellphone charger adapter. USB is also safe power due....
Check Stock

GEARWRENCH 8 Pc. Sensor and Sending Socket Set - 41720

  • Designed for the removal and installation of oxygen sensors, oil pressure sending units, and vacuum switches.
  • Includes 3/8" drive 7/8" slotted socket for PVS, TVS and O2 sending units.
  • Includes 3/8" Drive 7/8" (22mm) socket for Oxygen Sensor Units.
  • Includes 3/8" Drive 1-1/16" Deep socket for Oil Pressure Sending units.
  • Includes 3/8" Drive 7/8" (22mm) Low Profile Offset socket for O2 Sensor Unit.
  • Includes 1/2" Drive 1-13/16" socket for Oil Sending Unit.
  • Includes 1/2" Drive 1-1/16" socket for Thermal Sensor units.
  • Durable blow mold case for safe storage and tool retention.
Check Stock

WYNNsky Oxygen Sensor Remover Set, Oxygen Sensor & Oil Pressure Sending Unit Master Sensor Socket Set, 7 Pieces O2 Sensor Socket Set

  • ...l inspection or replacement of heated and non-heated oxygen sensors fitted to the following vehicle Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda. These sockets feature cut-away sections allow some sockets to fit over wiring harnesses, complete with the black phosphate finish for a durable design..
  • 3/8’’ Drive × 7/8’’ ×1/2’’ Oxygen Sensor Socket/Vacuum Switch Socket removes and installs vacuum switch with a 7/8’’ hex and some oxygen sensors.
  • 3/8’’ Drive × 7/8’’ × 3-1/8‘’ oxygen sensor socket removes and installs oxygen sensors in domestic and many import vehicles. Slot in socket for wire clearance..
  • 1/2’’ Drive ×1-3/16’’ ×3-1/2’’ vacuum switch socket removes oil pressure sending units on late 80’s to mid 90’s GM models.
  • 1/2’’ Drive ×1-1/16’’ × 3-1/4’’ thermal sensor switch socket removes and installs thermal sensor switch on 1973-1977 CM vehicles.
  • 3/8’’ Drive ×1’’ and 1-1/16’’ ×3’’ remove oil pressure sending units. Deep design fits switches up to 2-5/8’’..
  • 1/2’’ drive ×7/8’’ ×2’’ heated oxygen sensor sockets slot in socket accommodates connectors on heated oxygen sensors.
  • 3/8’’ Drive × 7/8’’ ×1-1/4’’ low profile design for use in ti....
Check Stock

Top Race Hobby Grade Remote Control Hydraulic Excavator, All Included Battery, Hydraulic Oil, Transmitter, Ready to Run 1:14 Scale TR-311

  • Hobby Grade Remote Control Hydraulic Excavator by Top Race TR-311.
  • powerful hobby grade machine that works with real hydraulics and oil this would be the first step from battery powered rc trucks to oil powered.
  • 1 of kind in the market of rc excavators, at a 1:14 scale this machine can do almost anything just like a real excavator, this Top Race excavator is so powerful it can pull 200 Lbs with its brushless motors.
  • The weight of this Top Race Truck is about 26 Lbs. and comes wioth a beautiful hard carry case, Excavator uses a complex remote, and an 7.4V 10000 Mah battery and hydraulic oil all included with your excavator..
  • CAUTION: This is not a toy if you have no experience in the hobby line of rc trucks and excavators please do NOT buy this machine , this machine needs experience and caution to operate..
Check Stock

Juki LU-1508NS Industrial Walking Foot Sewing Machine, Vertical Axis Hook, Servo Motor

  • ✅The Juki DDL-8700 is a single-needle, straight stitch, industrial sewing machine. Manufactured by Juki, a world leader in sewing quality and technology, this machine is perfect for sewing light to medium weight fabrics (not intended for leather or other heavy materials)..
  • ✅Included accessories in the machine DDL-8700 head: : Bobbin Winder ___Thread Stand ___Machine Oil ___ Instruction Manual ___ Oil Pan ___Knee Lifter ___V Belt.
  • ✅Juki DDL-8700 Single Needle Lockstitch Industrial Sewing Machine ( NOT a walking foot).
  • ✅Up to 4500 stitches per minute Identical to and replaces DDL-8500 models Replaces popular DDL-MS and DDL-888 models, but has more speed Single-needle Lockstitch Maximum foot lift: 13 mm Maximum stitch length: 5 mm Maximum stitches: 6 stitches per inch. Needles: 9-18 DBX1 (16x231) up to size 19 Sewing Speed max.: 5,500 spm Stitch Length max.: 5 mm Presser Foot Lift by hand, max.: 5.5 mm.
  • by knee, max. 13 mm Needle Bar Stroke 30.7 mm Hook: auto-lubricating full rotary hook Industrial Sewing Machi.
  • ✅It comes complete with sewing machine table and Electronic DC Servo Motor 3/4 H.P, 1 PHASE, 110 VOLT, 0 ~3300 RPM,(drawer, belt, tools, led lamp and instruction manual PDF format ) brand new ✅ Includes: Thread Stand Bobbin Winder O....
Check Stock

BISupply Vehicle Service Ramp Set – 6.6in Car Lift, 5 Ton Heavy Duty Truck Ramps for Vehicle Maintenance, 2 Pack

  • AUTO RAMP SET FOR VEHICLE MAINTENANCE: Use the BISupply 2 Pack Vehicle Ramps Oil Change Service Ramps to work on the underside of your vehicle easily and comfortably.
  • Generous 10,000-pound (4,536 kg) weight capacity per tire ramp allows you to safely change your oil, transmission fluid, drive belt, or other vehicle parts on your cars, pickups, SUVs, and vans.
  • Coming in at 19.5 pounds each (8.8 kg), these car jack ramps are designed for easy transportation.
  • SAFE STABILITY WHILE WORKING: Because of their larger surface area, ease of use, and ability to keep your vehicle level, car service ramps are often considered to be safer and more efficient than car stands and jacks for vehicle maintenance.
  • The traction dot design helps you to easily guide your vehicle up the RV ramps and to keep the tires in place.
  • It is suggested to use wheel chocks for extra security.
  • OPTIMAL CLEARANCE: Gradual incline lifts your truck or car up 6.6-inch (16.8 cm) from the ground.
  • This impressive lift height ensures reliable lift while providing convenient access to the underside of your vehicle for routine maintenance.
  • 11.3-inch (28.7 cm) wide automobile ramps fit extra wide tires.
  • EASY TO USE: Evenly distribute the weight of your vehicle with these auto ramps for changing oil an....
Check Stock

Juki Industrial Lockstitch DDL Series Servo Motor, Table, LED Lamp.Assembly Required. DIY (DDL-5550 Made in Japan)

  • l ✅.ASSEMBLY REQUIRED, please note machine comes unanssembled **This model is NOT a walking foot !**✅Juki DDL-8700 High-speed Lock-stitch Sewing Machine for apparel material..
  • ✅**This model is NOT a walking foot !**Use Replacement Spare Parts and Attachments which are interchangeable with JUKI DDL 8300 - 8500 - 8700 - 5550N series..
  • ✅Application: Medium-weight Max. sewing speed: 5,500 Stitches per Minute Max. stitch length: 5mm Needle bar stroke: 30.7mm Lift of the presser foot by hand: 5.5mm Lift of the presser foot: 13mm Needle (at the time of delivery): DB×1 (#14) #9~#18 / 134 (Nm90) Feed dog: 4-row (3-row) Hook: Automatic-lubricating full-rotary hook Lubrication: Automatic Lubricating oil: JUKI New Defrix Oil No.1 (equivalent to ISO VG7).
  • ✅SINGLE NEEDLE LOCKSTITCH AUTO-LUBRICATION OF HOOK HORIZONTAL AXIS HOOK AND BOBBIN ADJUSTABLE REVERSE FEED.
  • ✅It comes complete with sewing machine table and Electronic DC Servo Motor 1/2 H.P, 1 PHASE, 110 VOLT, 0 ~3300 RPM (Model DMS-550), everything (drawer, belt, tools,lamp and instruction manual) brand new,Thread Stand *Bobbin Winder *Oil Pan/Knee Lifter *Extra Bobbins *Extra Needles *Instruction Manual *Screw Driver* Machine Oil *Table top (size 48" x 20") *Heavy Duty Legs, *Table Top,*servo motor *....
Check Stock