Reviews Oil Pump Pickup Tube Hanger

Ford 7T4Z7H200A - Gasket

  • Genuine Ford part that fits your specific vehicle.
  • Manufactured to meet specifications for fit, form, and function.
Check Stock

TERA PUMP Portable Power Water / Fuel Transfer Battery Pump with Auto-Stop Sensor ( 2.4 GPM )

  • Upgrade 55 Gallon Drum Pump: 32mm Larger Oil outlet tube diameter for quicker oil transfer, Oil outlet pipe length 39 Inch, Overall Length 51 Inch, that can be adjusted to fit 15 - 55 gallon drums..
  • Heavy Duty Barrel Pump: Constructed with Aluminium alloy Steel, heavy duty & rugged, anti-corrosion and anti-rust for more durability..
  • Leak-Free Oil Pump: Our barrel pump is consisted of 3 piece segmented suction tube with screw thread, good sealing effectively prevent oil leakage..
  • Easy to Use Hand Pump: Great Filter at the bottom of the suction tube separate the oil and the oil dirt effectively. Hand Drum Pump Flow Rate 200-250ML (About 16 GPM ) . Support clockwise direction rotary..
  • Widely Used: This rotary barrel pump is suitable for pumping gasoline, kerosene, oil, diesel, hydraulic fluid lubricating oil, other non-corrosive liquids, NOT use for water!.
Check Stock

Racing Power Company R9729 Orange Drag Race Oil Pan for Big Block Chevy

  • Brand New Weiand Oil Pan Kit, 7 Quarts, Gold Zinc Finish, Fits 1986-2002 Small Block Chevy Drag Racing Engines (Holley Part #5003WND).
  • Fits: 1986-2002 Small Block Chevy Drag Racing Engines | Includes: Application specific oil pan | Oil pan gasket | Oil pump pickup | Pan mounting bolt kit.
  • Features: Trap door baffles keep oil under control during hard acceleration | Increased oil capacity to keep high performance engine oil systems fed properly | Kit includes Pan, Pump Pickup, Pan Gasket, and pan mounting bolt kit.
  • Specs: Application: 1986-2002 Small Block Chevy | Brand: Weiand | Crank Scraper Included: No | Dipstick Location: Passenger | Emission Code: 5 | Finish: Gold Zinc | Material: Stamped Steel | Oil Pan Capacity: 7 Quarts | Oil Pan Depth: 8.125" | Oil Pan Type: Fabricated | Product Type: Oil Pan Kit | Sump Location: Rear | Windage Tray Included: No.
  • NOTE: Kit designed to work with standard volume oil pumps..
Check Stock

Improved Racing EGM-500 LS Engine Oil Pump Pickup Tube Brace/Girdle

  • Machined from lightweight 6061-T6 aluminum, black anodized and laser-marked.
  • Distributes even clamping force around pickup tube flange by acting as an extension of the flange.
  • High-strength Class 10.9 M6 flange screws, zinc plated.
  • DOES NOT fit any LS oil pickup tube with welded flanges (GM Truck tube part # 12608593, Holley 302-1 and similar). DOES NOT fit pickup tubes with two screw holes on their flange (Holley 302-2 tube and similar)..
Check Stock

ICT Billet LS Billet Oil Pump Pickup Girdle Tube Pipe Hold Down Brace Support LS1 LS3 LS2 LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33 LS2 LH6 L92 L76 LY2 LY5 LY6 LC9 L98 L99 551910

  • Most LS oil pickups are secured to the oil pump using only 1 bolt on one side of the flange. This girdle straddles the flange and secures the pickup tube to the oil pump with 2 bolts for maximum clamping capacity..
  • Compatible with all LS series engines 1997-2014.
  • Made in the Wichita, KS from aerospace grade, USA billet aluminum.
  • Will not work with pick up tube with flange retainer tab (see photo)**.
Check Stock

Aluminum 15 to 55 Gallon Drum Pump Rotary Hand Liquid Transfer Heavy Duty Rotary Barrel Pump Hand Drum Pump for Kerosene Gasoline Oil Fuel Diesel Hydraulic Fluid

  • Hand Drum Pump: The overall height of the pump is 51inch, the length of the oil outlet pipe is 39 inch, and the inner diameter of the oil outlet is 1.1" (28mm). oil outlet pipe can be adjusted to fit 15 to 55 gallon drums. Tip: only for oils. Note: Do not use it to pump water,it is not suitable..
  • Quality Aluminum: Our drum pump is made of high-quality all aluminum material, which is highly anti-corrosion and anti-rust, durable and lasts longer. Our 55 gallon drum pump supports clockwise transfer handle instead of counterclockwise transfer handle..
  • Applicable Type of Oil: Extractable liquid: Diesel oil, kerosene, engine oil, hydraulic oil, Gear oil, edible oil (but not edible grade). Liquids that cannot be extracted: Gasoline, water, urea, acid-base liquid, corrosive liquid, chemical liquid, edible liquid, etc. cannot be extracted..
  • Great Filter: Our hand liquid transfer drum pump distribution has a fine filter. You only need to install it at the bottom of the suction tube, which can effectively separate the oil dirt and oil, so as to ensure that pure oil is pumped..
  • Good Sealing: 3 piece segmented suction tube, easy to adjust the length of suction tube according to the actual situation, and easy to store and carry at the same time.suction tube with screw....
Check Stock

Vevitts 80w Oil Change Extractor Pump 12V Oil Extractor Pump for Changing Diesel Fluid Scavenge Suction Oil Transfer Pump Kits for Jet Ski, Truck, RV, ATV, Boat (Red)

  • 【Instructions for use】1. Please pay attention to the direction of the inlet and outlet, the positive and negative poles and the locking hose lock before use.
  • 2. Please start the vehicle and heat the engine oil to 40-60 degrees for about 5 minutes, otherwise, the oil change pump may have low suction or get stuck. 3. CAN NOT be used to extract water, gear oil (too viscous) or flammable liquid (fuel, gasoline,kerosene,etc.)..
  • 【Complete Diesel Change Pump Kit】The oil transfer pump is mini but powerful. With 4.6ft Outlet tube & 4ft Inlet tube, the 8.2ft long battery clamps makes the extractor pump kit possible for being used at large range. The 2 hoops are used to tighten the tubes to avoid oil spilling..
  • 【12V 80w Oil Extractor Pump】Oil change pump, a great helper for quick and clean oil changing and transfer, all parameter is verified by multiple test. Diesel Flow Rate: 3.5L/min, Engine Oil Flow Rate(40-60℃): 1L/min, Inlet Tube Length: 1.2m/47.2in, Outlet Tube Length: 1.4m/55.1in, Voltage: 12V, Maximum current: 5A..
  • 【Premium Quality】We use pure copper for motors.Good conductivity, corrosion resistance and rust resistance, effectively avoid leakage or short circuit. Instead of manual operation, it can help you change oil quickly and cleanly....
Check Stock

KATUMO Gasoline Siphone Hose, Gas Oil Water Fuel Transfer Siphon Pump, Portable Widely Use Hand Fuel Pump, Fuel Transfer Pump with 2 Durable PVC Hoses

  • ✓ The Wekster multi-use self priming siphon liquid transfer pump kit includes 2 long hoses with a dipstick tube, safely extracting & inserting liquids like oil gas and water. And an air pumping hose and adapter for inflating air into tires etc..
  • ✓ SPECS: Gas Syphon Pump with intake & discharge tubes: 9” - 2 Hoses (with black connectors): each 50”/127cm, OD: 1/2” ID: 11/32” – Dipstick tube: 48”, OD: 1/4” ID: 1/8” – Air pressure tube: 15”, OD: 7/16” ID: 1/8”.
  • ✓ QUALITY: Durable hard plastic fluid pump provides perfect pressure with rapid siphoning transfer, and thick plastic hoses to ensure no leakage or slops - Rubber dipstick tube transfers oil without melting from heat – High-quality acid & water chemicals resistant equipment..
  • ✓ DESIGN: The gas siphon hand pump has Smooth action handle with 2 long flexible red hoses that reaches anywhere – Extractor dipstick tube sucks oil from any vehicle - Easy Assemble/Disassemble of the fuel siphon pump is great for efficient cleaning..
  • ✓ USES: Easy large hand vacuum pump with intake & discharge transfer system for motor oil changes, overfilled tanks, off season storage, refueling empty tank from gasoline container, draining transmission petrol fuel, diesel & gas from cars....
Check Stock

12v 80w Electric Oil Change Transfer Pump Extractor Kits for Boat/Car/Lawn Mower Marine/Jet Ski/Truck/RV/ATV Changing Diesel Fluid Scavenge Suction

  • 80w OIL CHANGE EXTRACTOR - The engine oil transfer pump is 80w. Extracting motor oil from vehicles quickly and cleanly. It can be used for changing oil 3L/min. Not compatible with water and petrol, gasoline, kerosene..
  • EASY ENGINE OIL CHANGE - The 12v oil extractor pump comes with 2 extractor tubes, easy for a top down oil change by single ON/OFF switch controll. Pumps oil out throw dip stick, no need to lay under the machines or vehicles. The oil will simply draw out the motor through the oil dipstick bore..
  • MULTIFUNCTIONAL OIL EXTRACTOR PUMP - The oil change pump kit fits for Car, Boat, Jet ski, Motorcycle, Scooter, Marine, Quad Bike, Truck, Forklift, Generator, Tractor, Riding Mower, Snowmower, etc, siphoning & transfering diesel, oil to other Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc..
  • PORTABLE OIL PUMP CHANGE EXTRACTOR - The oil transfer pump is mini but powerful. With 5ft Outlet tube & 4ft Inlet tube, the 8.2ft long battery clamps makes the extractor pump kit possible for being used at large range. The 2 hoops are used to tighten the tubes to avoid oil spilling..
  • FOR DIFFERENTIAL FLUID TRANSMISSION - This high efficient self-priming oil extractor pump is easy to pump various fluids and oils. Place the inlet/outlet ho....
Check Stock

DEMOTOR PERFORMANCE For 80-85 SBC Chevy Retro Finned Polished Aluminum Oil Pan 305 350 Small Block

  • Polished finned aluminum oil pan for small block Chevy.
  • This oil pan fits 1980-1985 2 piece rear main Chevy 305 327 350 engines.
  • Stock style 4 quart pan capacity with stock pickup.
  • The dipstick is on the passenger side and you can use the original oil pump pickup.
Check Stock