Reviews Oil Pump Installation

GPI - L5132 High Viscosity Oil Pump, 32 QPM, 230AC/115V Oil Transfer Pump for Viscous Fluids That Features a 0.75” Ball Valve Nozzle, 8 Foot Hose, 3 Foot Power Cord with Three-Prong Plug (142100-02)

  • ...f fluids without the risk of overheating. The weight centering inlet base of the pump reduces the tank stress and the pressure relief valve offers the easy strainer access..
  • EASY-TO-USE: Accompanied by a pre-installed 3 foot power cord with a three-prong grounded NEMA plug, this oil pump greatly reduces assembly and installation time. The pump includes an 8 foot long dispensing hose and a suction pipe telescoping 15”to 40”..
  • 1-YEAR WARRANTY: Built with high-quality parts, this CSA approved hydraulic oil transfer pump comes with a 1-year manufacturer’s warranty that gives you extra peace of mind. The 1HP motor is a UL recognized component and is the main source for this liquid transfer pump. GPI’s oil pumps are built to last and perform to deliver its maximum efficiency..
Check Stock

Upgrade Oil Change Pump Extractor, 12V 60W Motor Oil Diesel Fluid Transfer Pump Quick Oil Extractor Pump Scavenge Suction for Car Boat Motorbike Tractor Truck RV ATV

  • HIGH EFFICIENT: This oil transfer pump is an ideal equipment for quick easy and clean safety oil-changes. Flow Rate: 3L/min flow rate for engine oil, 4L/min for diesel. Voltage: 12V, maximum current: 5A, maximum power: 60W..
  • APPLICATION: This oil pump can change engine oil and diesel for cars, tractor, boat, motorbike, truck, RV and ATV and other 12V vehicles..
  • EASY INSTALLATION: You just need to place the inlet/outlet hoses at the appropriate positions, tighten the hose clamps, connect the power clamps anode and cathode to the car battery properly and press the button. Oil will be extracted by itself..
  • NOTE: To pump oil properly, please start the vehicle to heat up the oil (to 40~60 degrees)about 15 minutes. Otherwise, the oil change pump may have low suction or jammed..
  • WARNING: This oil pump is not use to extract water, gearbox-oil(too viscous) or flammable liquids (fuel, petrol etc)..
Check Stock

Lotyes Quick Oil Change Pump, DC 12V 60W Oil Diesel Fluid Pump Extractor Transfer Pump & Tubes Kit for Car, Boat, Motorbike, Truck, RV, ATV and Other Vehicles

  • ...ual operation and works by connecting the clamps to the vehicles 12V battery. It's high efficiency, rapid and saving effort..
  • Clean and Tidy: An ideal equipment for quick and clean oil changes. No more mess tools needed, the hoses and hose clamps in the package can prevent leakage during the extraction process..
  • Easy installation: Install the oil extractor inlet and outlet hose, tighten the hose clamps, connect the power clamps to the vehicles battery and switch the button on..
  • Versatility: This oil transfer pump can change engine oil and diesel for cars, boat, motorbike, truck, RV and ATV and Other Vehicles. WARNING: THIS PRODUCT CAN NOT USE TO EXTRACT WATER, GEARBOX OIL OR FLAMMABLE LIQUIDS(SUCH AS FUEL,PETROL,GASOLINE,ETC)..
  • What You Get: Lotyes oil extractor pump, outlet hose, inlet hose, hose clamps, battery clamps, user guide. We are certain that you will love the design and high quality of the product. Because you are our number 1 priority, we are offering premium customer support and money-back service for a risk-free purchase..
Check Stock

Lubeworks Oil Transfer Drum Pump Double Action 3:1 Fast Flow Rate 7.4gpm / 28lpm for SAE130 Oils/Fluids

  • ...r Multiple Fluid types of medium to high viscosity at a short to medium distance, typical fluids handled include: motor oil, synthetic oil hydraulic, gear oil, automatic transmission fluid and suitable up to SAE130 grade oil.
  • PROPER USE and SAFETY - All our pumps come with a 2" inch Adjustable Bung adapter, for easy installation for barrel mounted applications.
  • This pump can be barrel, cart or wall mounted.
  • A Wall Mount Kit or Extension Tube Kit are Sold SEPARATELY.
  • Follow manual for setup and always use the proper additional equipment as listed in the manual when installing pump and always wear protective glasses/goggles or gear when operating equipment.
Check Stock

Lubeworks Oil Transfer Drum Pump Double Action 1:1 Fast High Flow Rate 8.5GPM / 32LPM for SAE130 Oils/Fluids

  • ... for Multiple Fluid types of medium to high viscosity at a short to medium distance, typical fluids handled include: motor oil, synthetic oil hydraulic, gear oil, automatic transmission fluid and suitable up to SAE80 grade oil.
  • PROPER USE & SAFETY - All our pumps come with a 2" inch Adjustable Bung adapter, for easy installation for barrel mounted applications.
  • This pump can be barrel, cart or wall-mounted.
  • A Wall Mount Kit or Extension Tube Kit are Sold SEPARATELY.
  • Follow manual for setup and always use the proper additional equipment as listed in the manual when installing pump and always wear protective glasses/goggles or gear when operating equipment.
Check Stock

Hilmor 1948121 HVAC Vacuum Pump 5 Cfm

  • VACUUM PUMP: Great for HVAC/R installation, maintenance, and repairs, as well as more general industerial use. A blank-off valve isolates the pump from the system for accurate readings..
  • HASSLE FREE MAINTENANCE: Easy oil changes without loosing vacuum. Sloped and channeled housing, with an oversized oil fill port, allows oil to drain faster. In addition, sight glass allows oil to be checked at anytime..
  • COMPACT: Light and portable design makes it easy to take onsite. Two durable hoist points for hands-free carrying. Compatible with the Hilmor HVAC/R Carrying Strap (sold seperately)..
  • SPECIFICATIONS: 13.6" x 5.5" x 10.7", 24 lbs, 1/2 HP, 120v.
Check Stock

YAMATIC 3/4\ Shaft Horizontal Pressure Washer Pump - 3000 PSI @ 2.5 GPM - Original Engineering OEM Pump for Most Brand gas engine power washer

  • Extend the life of your pressure washer: Save money by replacing your pump instead of buying a whole new power washer. This easy-to-install kit is great for power washers that can support 3700 PSI at 2.5 GPM to wash walls, fences, sidewalks, vehicles, and more.
  • Easy Installation: This replacement pump features a garden hose inlet and threaded M22 connection high pressure hose outlet. The SAE standard bolt pattern that fits most* gas-powered pressure washers. Each kit includes a siphon tube with filter, mounting bolts, shaft key, and instruction booklet to get your machine back in action as quickly as possible. (*Check your pressure washer's inlet and outlet orientation to ensure compatibility).
  • Adjustable power: This pump includes PowerBoost Technology that delivers higher pressure at the nozzle for a more efficient cleaning experience. There is also a hand turn knob that lets you reduce power at your convenience for tasks that require lower pressure.
  • Know when to change your oil: The sight glass and advanced oil seal technology eliminates the need for a dipstick. With visibility to the oil level and the oil itself, you can easily see when oil levels are low or if water has clouded the oil.
  • Get the right pump for your machine: this pump is designed for g....
Check Stock

Leadrise 12V Electric Fuel Pump Universal Inline Fuel Pump Universal Low Pressure Gas Diesel Fuel Pump 2.5-4psi HEP-02A

  • ★【SPECIFICATIONS: 】 Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch ).
  • ★【Electric Fuel Pump Performance:】 Low Pressure Fuel Pump, build-in check valve design to prevent back flow, light-weight and small size, Using a plunger-type of fuel supply way, suction stronger, oil supply more stable..
  • ★【12 Volt Fuel Pump: 】Upgrade check valve provides optimum traffic, reducing the noise of the pump so we can operate quietly. The Oil Absorption Capacity is Strong Enough to Ensure the Supply of Fuel.
  • ★【Easy to Install:】Universal Electric Fuel Pump 2 bolt fixing, 2 wires design, build-in check valve designed to prevent back flow. It can be used as booster, standby unit or as a completely independent fuel pump installation and mounted anywhere..
  • ★【WIDE APPLICATION:】Electric fuel pump Fit all 12 Volt Cars such as Toyota, Ford, Honda, Mazda, and any other suitable car Trucks , Boats & Generators..
Check Stock

AAA 90036 Horizontal Triplex Plunger Replacement Pressure Washer Pump Kit, 3200 PSI, 2.8 GPM, 3/4' Shaft, Includes Hardware and Siphon Tube, for Industrial Gas Powered Machines, Black

  • Extend the life of your pressure washer: Save money by replacing your pump instead of buying a whole new power washer. This easy-to-install kit is great for power washers that can support 3200 PSI at 2.8 GPM to wash walls, fences, sidewalks, vehicles, and more.
  • Easy Installation: This replacement pump features a garden hose inlet and threaded M22 connection high pressure hose outlet. The SAE standard bolt pattern that fits most* gas-powered pressure washers. Each kit includes a siphon tube with filter, mounting bolts, shaft key, and instruction booklet to get your machine back in action as quickly as possible. (*Check your pressure washer's inlet and outlet orientation to ensure compatibility).
  • Adjustable power: This pump includes PowerBoost Technology that delivers higher pressure at the nozzle for a more efficient cleaning experience. There is also a hand turn knob that lets you reduce power at your convenience for tasks that require lower pressure.
  • Know when to change your oil: The sight glass and advanced oil seal technology eliminates the need for a dipstick. With visibility to the oil level and the oil itself, you can easily see when oil levels are low or if water has clouded the oil.
  • Get the right pump for your machine: this pump is designed for g....
Check Stock

Mplus M176 Oil Pump Kit Replace for 1991-2008 for Ford, for Lincoln, for Mercury 4.6L 5.4L 6.8L V8 SOHC 16V 21mm Inlet Only for Windsor, Romeo Engine

  • Car Fitment-1992-2008 for Ford Crown Victoria / 1996-2004 for Ford Mustang GT / 1997-2004 for Ford Expedition / 1997-2008 for Ford F Series Trucks / 1997-2004 for Ford F 150 Trucks / 1997-2008 Ford E Series Vans and more, please confirm this item fits for your vehicle before purchasing (Check Fitment Data Above or see description below).
  • OE Part Number-F5A2-6600B, 5L3Z-6600-A, 5L3Z-6600-AA. Mplus Oil Pump are certified to ISO/TS16949:2009 and ISO14001..
  • High Performance-Our Aluminum die cast technology allows for size and weight reduction.Lubricates critical components to maximize the life of the engine. Mplus Oil Pump aims to deliver ideal oil pressure to the engine without creating excess load..
  • Installation Tips - Most oil pump sits right at the front of the engine and is driven by a gear on the crankshaft. You need to remove the oil pan firstly and then replace the bad oil pump from underneath. You could also ask help for a professional mechanic..
  • Buy with Confidence- Our local US-based team and inventory offer 24-hours professional after-service and fast shipping. We also offers 2 years or 40000 miles warranty, please buy with confidence..
Check Stock