Reviews Oil Pressure Control Valve

Injector Pressure Regulator Valve - IPR Valve - Compatible with Ford Trucks - Powerstroke 6.0L Diesel - E-350, Excursion, F-250, F-350 Super Duty - Replaces 5C3Z9C968CA, CM-5126, 5C3Z-9C968CA, AP63417

  • Replacement Injector Pressure Regulator Valve - regulates the oil bypass circuit of the high pressure oil pump. It is an electromagnetic valve that opens and closes to allow high pressure oil into the injectors. This enables the PCM to control fuel delivery by increasing the speed in which the IPR valve operates thus, being a critical component in your vehicle system..
  • Compatible Replacement for Ford 6.0L Vehicles - 2005 E350 Club Wagon | 2005 - 2010 E350 Super Duty | 2005 Excursion | 2005, 2006, 2007 F250 Super Duty | 2005, 2006, 2007 F350 Super Duty |. The injector pressure regulator valve can be located after removing the intake and the fuel filter housing above the engine which can be seen attached to the high pressure oil pump (HPOP)..
  • Replaces Part# 5C3Z9C968CA, 1846057C1, CM-5126, 5C3Z-9C968-CA, AP63417 - commonly found on popular F-250, F-350 Super Duty, E-350 and Excursion models with 6.0L V8 Diesel Powerstoke Engines including years 05, 06, 07, 08, 09, 10. If you are experiencing no or hard starting when the engine is hot or after stalling and usually starts when it is cold or your vehicle is idling erratically or jerking then you may have a problem with your IPR valve..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, this inj....
Check Stock

6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool, High Pressure Oil Rail Adapters Leak Test Kit and 6.0 IPR Valve Socket with Seal Kit Fit for Ford 6.0L Powerstroke Diesel Engine

  • Fitment: IPR Valve Air Test Fitting and Oil Rail Adapters perfectly fit for Ford 6.0L powerstroke diesel high pressure oil system.
  • 6.0 IPR Valve Socket compatible with Ford 6.0L and other diesel engines, and Seal Kit fits for 2003-2010 Ford 6.0L V8 Diesel Turbocharged Modles.
  • High Quality: High Quality Machined from Brass or Steel with excellent mechanical and physical properties, these tool kit show their high tightness, corrosion resistance and durability.
  • Oil Rail Adapters: Both brass adapters use standard 1/4" NPT air hose connection, which allow observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitate testing of the High Pressure Oil System for leaks using shop air.
  • IPR Valve Air Test Fitting : This tool has 1/4 inch pipe threads to accept standard air fittings.
  • It takes the place of the IPR valve meaning that the system can be completely sealed so that even the smallest leaks can be detected.
  • 6.0 IPR Valve Socket with Seal Kit: Use with 3/8" square drive, 12 point design socket can tightly locate your IPR valve in a very tight location, also built to bottom out on the hex so it does not put torque on the connector in case it can be reused (Include IPR Valve Seal Kit OE Number 3C3Z9H52....
Check Stock

Moen UTS2912EPBG Flara M-CORE 2-Series 1-Handle Shower Trim Kit, Valve Required, Brushed Gold

  • ...ng 3 Showering Devices, transfer valve cartridge must be modified. Simple Cartridge Modification changes the valves flow from two outlets to three outlets. See Transfer Valve Instructions for additional information..
  • IMPORTANT: When using 2 Showering Devices, designated outlet 3 must be CAPPED. Caps sold separately..
  • PRESSURE-BALANCING CAPABILITY: M-CORE valves, with 3-Series trim, have pressure-balancing capabilities designed to control temperature fluctuations in the event of water pressure changes in the home.
  • VOLUME CONTROL: Features volume control, allowing you to adjust the flow of water for greater functionality.
  • STREAMLINED INSTALLATION: Features an integrated mounting bracket that secures the valve directly to a brace, streamlining the installation process and saving time.
  • BUILT TO LAST: Backed by Moen’s Limited Lifetime Warranty.
Check Stock

Benefast VTEC Solenoid Spool Valve w/Timing Oil Pressure Switch & Gasket Compatible with Honda Accord CR-V Element Civic Acura RSX Acura TSX Replacement# 15810-RAA-A01 15810-RAA-A03

  • The VTEC (Variable Valve Timing and Lift Electronic Control) system increases the amount of intake valve lift for increased power. It accomplishes this by turning a control solenoid 'ON' to allow oil pressure into the VTEC control passages to apply pins that will lock the intake rockers. When the oil pressure is present, the pressure switch signal will go high. When the control solenoid is turned 'OFF', the oil pressure is dumped and the oil pressure switch signal will go low..
  • If the pressure switch signal is not logical for the commanded state of the control solenoid, a DTC will set and the PCM will go into a 'fuel-cut' mode limiting engine rpm and performance. The PCM simply doesn't 'know' what the state of the intake valves are, so you end up with the symptoms you describe..
  • This VTEC Solenoid Fits for the Following Vehicles: Honda Accord 2003-2007, Honda Civic 2002-2005, Honda CR-V 2002-2009, Honda Element 2003-2011, Acura RDX 2002-2012, RSX 2002-2006, Acura TSX 2004 2005 2006 2007 2008..
  • Customers can find the product you need accurately according to the OE number. Replacement part number: 15810-RAA-A01, 15810-RAA-A02, 15810-RAA-A03, 15810-PNE-G01, 917-224, 917224, 15810RAAA01, 15810RAAA03, 15810RAAA02, 15810PNEG01..
Check Stock

Moen UT3611ORB Voss Collection M-CORE 3-Series 2-Handle Shower Trim with Integrated Transfer, Valve Required, Oil-Rubbed Bronze

  • UNIQUE FINISH: Oil-Rubbed Bronze finish delivers a rich, dark brown, Old World finish with striking light and dark accents.
  • VALVE REQUIRED: This trim kit requires M-CORE Mixing Valve with Integrated Transfer Valve U232 or U362, with preferred installation option, to complete installation.
  • FOR USE WITH TWO OR THREE SHOWERING DEVICES: Integrated M-CORE Transfer Valves can control 2 or 3 showering devices, a simple transfer cartridge modification changes the valve’s flow from two outlets to three outlets.
  • IMPORTANT: When using 3 Showering Devices, transfer valve cartridge must be modified. Simple Cartridge Modification changes the valves flow from two outlets to three outlets. See Transfer Valve Instructions for additional information..
  • IMPORTANT: When using 2 Showering Devices, designated outlet 3 must be CAPPED. Caps sold separately..
  • PRESSURE-BALANCING CAPABILITY: M-CORE valves, with 3-Series trim, have pressure-balancing capabilities designed to control temperature fluctuations in the event of water pressure changes in the home.
  • VOLUME CONTROL: Features volume control, allowing you to adjust the flow of water for greater functionality.
Check Stock

Carbon Steel Mini Needle Valve - with Round Knob 1/4\ NPT 6000 PSI DAIRAZAN

  • 【Size】Male Thread 1/4" NPT x 1/4" NPT for connecting female threaded pipe fittings..
  • 【Material】Made of solid brass for strength, corrosion resistance, ductility at high temperatures, and low magnetic permeability. It is nickel plated so that it is anti-rust and corrosion resistant..
  • 【High Quality】High pressure brass needle valve, stable smooth delicate tightness practical. The brass needle valve is clean and bright inside, and the ruler can be controlled accurately. Its exquisite processing, can withstand greater pressure than other types of valves, strong connection, high pressure resistance, good sealing performance and repeatable installation..
  • 【Easy to Use】The product is easy to install and maintain, and it is safe and reliable to work. If you need a long time and stable control, it is best to use it with a regulator..
  • 【Widely Applications】Needle valve is an important part of the instrument measurement pipeline system, used to adjust the flow to the instrument or other industrial applications, open or cut off the pipeline path. Generally used in water, steam, gas, oil and other media with smaller flow and higher pressure. It is often used in industrial automatic control piping systems such as ships, oil refining, chemical, electri....
Check Stock

Chief G Series Hydraulic Directional Control Valve with Joystick, Hydraulic Flow Control Valve with 2 Spool 3-pos Spring Center - 10 GPM, 3625 PSI, SAE 8 Work, SAE 10 Inlet/Outlet Ports, 10 lb, 220910

  • Hydraulic Spool Valve: Equipped with 1 spool and 1/2" BSPP P port, A port, B port. 3/4" BSPP T port, N port. The maximum pressure of this hydraulic is 3625 PSI, and the maximum flow can reach 21 GPM. The opening and disconnection of hydraulic oil are controlled by connecting the valve to the oil line..
  • Automatically Reset: The standard spool is spring-returned and can be reset to the neutral position. In addition, there is a spring at the bottom of the handle that makes the joystick easy to control..
  • Great Inner Valve: The check valve in the valve body ensures that the hydraulic oil does not return, and the overflow valve in the valve body can adjust the working pressure of the hydraulic system..
  • Compact Structure: 1 spool hydraulic valve is made of aluminum and iron, and the solid structure can provide long-term service. The compact design allows it to install in narrow areas and maximizes its control capabilities..
  • Widely Used: It is used in hydraulic systems in agriculture, horticulture, forestry, construction, and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, construction machines, loaders, excavators, sweepers, industrial machines, and for other applications hydraulically controlled..
Check Stock

AlphaWorks Preset Digital Oil Control Valve Meter Nozzle 10 GPM / 35 LPM Elite Heavy Duty Air Operated Pneumatic 1/2\ Inch NPT Inlet Pressure Range 7-1000 PSI / 0.5-70 BAR Flexible Spout (Not for Gas)

  • ...ndards & provide dependable performance. Manufactured to OSHA & ISO Regulations, making this a solid choice for the everyday Hard Working American!.
  • GEARHEAD SPECS - This AlphaWorks Preset Digital Control Valve has a Max Flow rate of 10GPM / 35LPM, at a precision of ±0.5%, handling Viscosity of 8-5000mPas, w/ a Max Pressure Range of 7Mpa 0.5-50BAR / 7-1000PSI. An Inlet Connection of 1/2" NPT Female connecting to industry standard oil hose reels & battery powered w/ 1x Alkaline Cell 9v Battery, all together weighting 3.3 lbs, including the Digital Preset LCD Meter & Flexible Spout..
  • SUPERIOR PRODUCT INTEGRITY - This Preset LCD Digital Meter Control Valve has a 4-digit easy to read screen, w/low battery indicator to avoid sudden shut-off & can measure/dispense in various calibrations of Liters, Gallons, Pints & Quarts. Made of aluminum frame+exterior ergonomic oil & waterproof polypropylene shell & shockproof rubber, to ensure strength & durability. Our compact design has zero back pressure capability, delivering consistent measurements & smooth dispensing during operation..
  • SAFETY & BEST APPLICATION - Our Control Valves include rubber protection to absorb shock or an impact resistant polypropylene body, both delivering prolonged lifetime in workshops. A....
Check Stock

AlphaWorks Digital Oil Control Valve Meter Nozzle 10 GPM / 35 LPM PRO Heavy Duty Air Operated Pneumatic 1/2 inch NPT Inlet Pressure Range 7-725 Psi 5-50 Bar with Flexible Spout Not for Gasoline

  • ...dards & provide dependable performance. Manufactured to OSHA & ISO Regulations, making this a solid choice for the everyday Hard Working American!.
  • GEARHEAD SPECS - This AlphaWorks Digital Control Valve has a Max Flow rate of 10GPM / 35LPM, at a precision of ±0.5%, handling Viscosity of 8-5000mPas, w/ a Max Pressure Range of 5Mpa 0.5-50BAR / 7-725PSI. An Inlet Connection of 1/2" NPT Female connecting to industry standard oil hose reels & battery powered w/ 1x 3V CR2 Battery, all together weighting 2.86 lbs, including the Digital LCD Meter & flexible spout..
  • SUPERIOR PRODUCT INTEGRITY - This LCD Digital Meter Control Valve has a 5-digit easy to read screen, w/ low battery indicator to avoid sudden shut-off & the ability to measure/dispense in various calibrations of Liters, Gallons, Pints & Quarts. Made of high quality aircraft aluminum to ensure the strength & durability, while designed to be oil & waterproof. We engineered a compact design w/ zero back pressure capability, delivering consistent measurements & smooth dispensing during operation..
  • SAFETY & BEST APPLICATION - Our Control Valves include rubber protection to absorb shock or an impact resistant polypropylene body, both delivering prolonged lifetime in....
Check Stock

6.0 Injector Pressure Regulator IPR Valve Socket & Air Test Fitting Tool Kit & Fuel Rail Adapters for 2003-2010 Ford 6.0L for Powerstroke E-350/ E-450, Excursion, F-250/F-350/F-450/F-550

  • Fitment -- Fit for 2003 - 2010 Ford Super Duty F250 F350 F450 F550.
  • 2003-2010 Ford Excursion, 2004-2010 Ford E-350 E-450 with 6.0L V8 diesel turbocharged engines..
  • IPR Valve Socket -- Replace the worn out injector pressure regulator (IPR) valve, designed to remove/replace your injector pressure regulator (IPR) effectively and quickly!.
  • IPR Valve Air Test Fitting Tool -- Used to quickly verify that an engine has no high pressure oil leaks before installing the engine into the vehicle where repairs are much more difficult..
  • Fuel Rail Adapters -- High Quality CNC Machined from Billet Brass, allows observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitates testing of the High Pressure Oil System for leaks using shop air..
  • 100% Satisfaction Guarantee -- If you're not 100% satisfied with our Kits, simply return it for a full refund in 30 days, Premium Support & 12 Months Warranty..
Check Stock