Reviews Oil Pipe Joint

2.5" Lap Joint Band Clamp Exhaust Clamps Pipe Repair Parts Stainless Steel

  • Universal fitment, Joins 2.5" OD Pipe to 2.5" ID Pipe, made of 304 stainless steel. There are 5 sizes for choose, it can meet your various needs. reducing costs and time Significantly..
  • The lap joint clamps 2.5" are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat back systems, racing exhaust, and show cars..
  • Conforms to pipe and flex tubing, exhaust pipe connector come with an "I" block provides a full 360 °equal distribution of stretching forces, without distorting the pipe, to create the best seal available without distorting pipe, This exhaust band clamp is specifically designed for exhaust pipes connection..
  • No welding design makes lap joint clamp fast, easy and accurate installation. It is removable and reusable. just need to put one of the nut bar on one side and insert the bolts, put another nut bar on, then screw the nuts, works done..
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 2.5" lap joint band clamp, you can feel free to conta....
Check Stock

ESPEEDER 3.0 Lap Joint Band Clamp Exhaust Clamps Pipe Repair Parts Stainless Steel

  • Universal fitment, Joins 3.0" OD Pipe to 3.0" ID Pipe, made of 304 stainless steel. There are 5 sizes for choose, it can meet your various needs.....
  • The lap joint clamps 3.0" are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat....
  • Conforms to pipe and flex tubing, exhaust pipe connector come with an "I" block provides a full 360 °equal distribution of stretching forces, without....
  • No welding design makes lap joint clamp fast, easy and accurate installation. It is removable and reusable. just need to put one of the nut bar on one....
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 3.0" lap joint band clamp, you can feel free to contact us via....
Check Stock

SINTLY 3/8\ NPT to 6AN Flare Male AN6 Straight Fitting Union Flare Adapter Aluminum Black 2Pcs

  • 【Tips】To obtain a proper seal in the NPT joint, you need to use a sealant compound or PTFE tape. The thread is sealed by wedging. The NPT connection cannot be reused. When accessories are reused, this can cause wear or increase the possibility of leakage..
  • 【37 Degree Flare Fitting Taper】：The 6an male flare to 3/8" NPT fitting has one male side AN is a 37-degree flare fitting taper and the other male side NPT is a 60 degree tapered threads. These adapter hose fittings are designed to quickly make professional 37° AN connections from NPT tapered pipe threads. Designed for smooth flow that gives better fluid flow, tight security, and leaks free.
  • 【Application】-6AN to 3/8" NPT straight flare to pipe adapter is widely used in kinds of liquids, oil, Water, Air, Fuel lines, E85, gas, etc. Bulkhead Fitting is perfect to apply in automotive, industrial, boat/marine, etc. The male flare fitting fit all oil cooler / fuel tank / fuel pump/fluid Line/turbo..
  • 【Material ＆ Features】Made of High-Performance Lightweight 6061-T6 Billet Aluminum Material. All threads are designed for the maximum percentage of engagement. One side is AN standard and the other is NPT National Pipe Taper Thread. Each straight fitting is completed with a black anodized fini....
Check Stock

ESPEEDER 2.0" Lap Joint Band Clamp Exhaust Clamps Pipe Parts Stainless Steel 2Pcs

  • Universal fitment, Joins 2.0" OD Pipe to 2.0" ID Pipe, made of 304 stainless steel. There are 5 sizes for choose, it can meet your various needs. Come with 2Pcs/Package. reducing costs and time Significantly..
  • The lap joint clamps 2.0 are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat back systems, racing exhaust, and show cars..
  • Conforms to pipe and flex tubing, exhaust pipe connector come with an "I" block provides a full 360 °equal distribution of stretching forces, without distorting the pipe, to create the best seal available without distorting pipe, This exhaust band clamp is specifically designed for exhaust pipes connection..
  • No welding design makes lap joint clamp fast, easy and accurate installation. It is removable and reusable. just need to put one of the nut bar on one side and insert the bolts, put another nut bar on, then screw the nuts, works done..
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 2.0" lap joint band clamp, you can ....
Check Stock

EVIL ENERGY 2.25' 2 1/4 Lap Joint Exhaust Band Clamp Exhaust Repair Preformed 304 Stainless Steel 2pcs

  • Joins 2.25 inch OD Pipe to 2.25 inch ID Pipe. Lap joint exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as pipes, muffler and catalytic converters. Width of strap: 2.94inch (74.8mm). Torque: 63 N·m. Package: 2pcs..
  • Connection Type: ID-OD slip fit connection, preferably with compression slit. This lap joint clamp commonly to join different size pipe..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion..
  • Material: 304 stainless steel strap, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Lap Joint band clamp requires that the sections being clamped have sufficient lengths of straight pipe leading into it. It is removable and reusable, easy to install without welding..
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

Universal Electric Fuel Pump Kit for All 12V Cars Trucks Boats Carburetor Lawn Mower, DC 12V (3-6PSI) Fuel Pump+ 2M 5/16" ID Fuel Line + Fuel Filters + 10pcs Hose Clamp

  • Output Pressure is 3-6 psi, Pressure : 0.032-0 .045 MPA.
  • which can reach 80-100 (liters/hour) per hour, and the oil absorption capacity is strong enough to ensure the supply of fuel..
  • - : Fits 5/16 "Oil Pipe, 5/16" Joint Or Connector At Each End, Transparent Plastic Shell, Orange Inner Filter, With Metal Brass End Caps On The Top And Bottom Of The Filter, Filter Out Impurities And Precipitation In Gasoline, Reduce Parts Wear And Protect The Engine, Direct Installation, Simple And Convenient..
  • : You Will Get A Universal 12V (3-6PSI) Electric Fuel Transfer Pump + 2m/79-Inch Reinforced Fuel Pipe + 5/16-Inch Fuel Filter + 10 Hose Clamps. The kit fit all 12 Volt Cars (such as Toyota, Ford, Honda, Mazda, and any other suitable car), Trucks, Boats & Generators, Lawnmower..
  • : The wall thickness is 3.2mm. The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. Oil resistant, cold-resistant and ethanol tolerance..
  • : If you are not satisfied with our electric fuel pump kit, p....
Check Stock

TECHTONGDA Automatic Transmission Fluid Flush Machine Oil Changer Cleaning Machine DC12V 0-60PSI

  • 1. This is a universal equipment which is an ideal tool for cleaning and changing the oil of any type of automatic transmission..
  • 2. It can be connected with the pipeline of the gearbox radiator with the quick joint, so that it can complete the cleaning and oil change of the gearbox and the heat pipe road within 20 minutes, and the change rate of the gearbox oil is close to 100%..
  • 3. It is designed with adjustable pressure, and users can set different pressure and flow rate according to different models..
  • 4. Equipped with two flow meters for oil inlet and return, can always keep the same amount of oil in the gearbox..
  • 5. With automatic heating device, not only make the transmission oil being exchaged under constant temperature environment, but also provides a circulating cleaning mode, which can completely remove the metal debris and oil sludge inside the transmission without dismantling the transmission..
Check Stock

Acouto Motorcycle Clutch Cable Linkage Line Plastic + Metal Fit for Yamaha Banshee 350 YFZ350 1987-2006

  • Main Usage: Hydraulic brake or clutch oil line pipe modification and replacement.
  • Compatibility: Motorcycle Dirt Bike ATV Moped Scooter,etc..
  • Quantity and specification: 1 x Oil Tube Line with φ10mm joint, Total length: 1.2m/3.93ft, 2 x Banjo Bolt with M10x1.25 thread.
  • High quality: Lightweight, Non-Flammable, Low Permeability, Solvent Resistant.
  • Notice: Please measure the length of your line accurately before choosing the appropriate model..
Check Stock

316 Stainless Steel Compression Tube Fitting Union Straight Adapter Tube Double Ferrule Pipe Fitting Adapter for Pipe 2Pcs Ф1/2

  • 【316 Stainless Steel】 The double ferrule pipe fitting adapter adopt high-quality stainless steel 316 material,the inspection indicators are in line with the standard guaranteed spectrometer..
  • 【Good peformance without welding】The product has simple and firm connection, good sealing, no need for welding, high pressure resistance and vibration resistance..
  • 【Easy to clean】The surface of the joint is finely polished by a special process, the hand feels good and delicate, and the interior is clean and bright..
  • 【Suitable for complicated pipeline connections】Suitable for some complicated pipeline connections that cannot be welded, and can pass through gas, liquid, oil and general corrosion pipeline systems..
  • 【Comply with national standard】 The double ferrule straight‑through joint is a relatively common national standard joint, which serves as a connection between steel pipes..
Check Stock

an-do-er Saxophone Sax Cleaning Tool Brush Cloth Thumb Rest Cushion Reed Case Cleaning Kit

  • Sax swab:Weighted (small steel) on rope at both ends.Keep away stuck,pull it through the bell and out of the neck joint freely(random color cloths)..
  • Sax necking swab:Enter the pipe body through the pendant to clean the moisture in the pipe,the operation is easy and natural(random color cloths)..
  • Key oil:Maintain the key levers,the keys will be more flexible while playing.It can effectively reduce the wear between the shaft and the shaft sleeve,increase the service life of the instrument..
  • Mouthpiece brush:Easy to clean the dirt in the mouthpiece..
  • Toothbrush:Clean the stains on the surface of the reeds..
Check Stock