Reviews Oil Pan Thread Repair

ABN 131-Piece Metric Thread Repair Set – Damaged Helicoil-Type Thread Master Repair Kit for Automotive Repairs

  • [Create Stronger Internal Threads]: The ABN Helicoil Rethreading Tool Kit Metric Stripped Thread Repair Kit is a course threads M5 to M12 restorer 131-piece set made of chrome-vanadium with stainless steel coils to restore damaged threads in steel, cast iron, and aluminum spark plug engine repairs, stripped oil pan drain plugs, and more.
  • [Contents]: Thread restorer kit metric set includes 5 insert installation tools, 5 lug break pin tools, 5 twist drill bits, 1 hex key, 5 thread taps, 110 wire thread inserts, carrying case, and instructions.
  • [Perfect Sizes]: Twist drill bit sizes 5.2mm, 6.3mm, 8.3mm, 10.5mm, 12.5mm.
  • Screw tap and thread insert sizes M5x0.8x6.7mm, M6x1.0x8.0mm, M8x1.25x10.8mm, M10x1.5x13.5mm, M12x1.75x16.3mm (where M12 means thread outer diameter = 12mm, 1.75 means pitch of thread = 1.75mm).
  • [Quick Organization]: Steel carrying case with latch and molded plastic inside tray insert to keep universal thread repair tool pieces separated and easy to access.
  • Includes bottom recesses for organizing the coils in included plastic bags.
  • [Easy to Use]: Remove your damaged thread by using an included twist drill bit.
  • Load the thread insert into installation tool.
Check Stock

Small Block Chevy Overhaul Gasket Set, 350 Chevy, 67-'85

  • Application Range: It fits 1957-1979 small block 283, 307, 327, 350 and 383 V8 engines with a 2 piece rear main seal and left hand oil pan dipsticks. It includes all the necessary gaskets and seals for one complete engine repair..
  • Application Range: It fits 1957-1979 small block Chevy 283, 307, 327, 350 and 383 V8 engines with a 2 piece rear main seal and left hand oil pan dipsticks. It includes all the necessary gaskets and seals for one complete engine repair..
  • Premium Quality: Gaskets provide a reliable means of repairng your engine for your daily street cruiser, tow vehicle, street rod, circle track, dirt track, and drag strip performance racing engines.
  • Gasket set includes the following pieces: Cylinder head gaskets, intake manifold gaskets, valve cover gaskets, exhaust manifold gaskets, timing cover gasket, timing cover seal, oil pan gaskets, water pump gaskets, fuel pump gasket, thermostat water outlet housing gaskets, distributor gasket, o ring valve stem seals, and rear main seal..
Check Stock

Stahlbus Oil Drain Valve Plug M14x1.5x12mm Steel - Clean, Easy, NO Tool Oil Change - Includes Oil Drain Plug, Washer, Cap, Connector, Silicone Hose

  • Clean, Fast, Easy Oil Change - No messy oil spills.
  • Reduced Burning Risk From Oil & Pan - No need to touch the pan or drain bolt.
  • Oil Change without Tools - Unscrew the cap, quarter turn of the connector, and wala!.
  • Never Lose a Drain Plug During Oil Change - Stahlbus' original designed drain plug stays on the oil pan for life, even during oil changes!.
  • Never Never Have a Thread Issue on Oil Pan or Plug Once Installed - Stahlbus' original designed drain plug stays on the oil pan for life, even during oil changes!.
Check Stock

JUKI MO-6714S Industrial 4-Thread Overlock Sewing Machine

  • ✅Thank you! see below full info. on this machine,--- Get your sewing job done real fast with the Juki DDL-8700H sewing machine that can do up to 5500 stitches per minute. This Juki sewing machine has a large 11-inch arm space that lets you work with even large quilts. The stitch length of this 5500 SPM sewing machine goes up to 5mm which gives you a lot of freedom in doing your job..
  • ✅The sewing machine complies with the "Juki Group Green Procurement Guidelines" on the use of hazardous substances, will be delivered in 3 boxes. 1) machine head, & some accessories* 2) servo motor & v belt 3) table top/legs/drawer/*2 spool-Thread Stand Bobbin Winder Oil Pan/Knee Lifter 1 Bobbins 1 Needles Instruction Manual Screw Driver Machine Oil 2-Euro Hinges & 2 Euro Rubber Mounts Table Rest Pin Safety Belt Guard.
  • ✅1) machine head, & some accessories* 2) servo motor & v belt 3) table top/legs/drawer/*2 spool-Thread Stand Bobbin Winder Oil Pan/Knee Lifter 1 Bobbins 1 Needles Instruction Manual Screw Driver Machine Oil 2-Euro Hinges & 2 Euro Rubber Mounts Table Rest Pin Safety Belt Guard.
Check Stock

Lisle 19852 Truck and Trailer Wheel Pan

  • Catches Oil from Wheel Hubs After Removing Cap.
  • The pan fits rims with 13 3/4" ID and larger.
  • handle compartments hold hub nuts out of the oil.
Check Stock

Juki LU-1508NS Industrial Walking Foot Sewing Machine, Vertical Axis Hook, Servo Motor

  • ...e-needle, straight stitch, industrial sewing machine. Manufactured by Juki, a world leader in sewing quality and technology, this machine is perfect for sewing light to medium weight fabrics (not intended for leather or other heavy materials)..
  • ✅Included accessories in the machine DDL-8700 head: : Bobbin Winder ___Thread Stand ___Machine Oil ___ Instruction Manual ___ Oil Pan ___Knee Lifter ___V Belt.
  • ✅Juki DDL-8700 Single Needle Lockstitch Industrial Sewing Machine ( NOT a walking foot).
  • ✅Up to 4500 stitches per minute Identical to and replaces DDL-8500 models Replaces popular DDL-MS and DDL-888 models, but has more speed Single-needle Lockstitch Maximum foot lift: 13 mm Maximum stitch length: 5 mm Maximum stitches: 6 stitches per inch. Needles: 9-18 DBX1 (16x231) up to size 19 Sewing Speed max.: 5,500 spm Stitch Length max.: 5 mm Presser Foot Lift by hand, max.: 5.5 mm.
  • by knee, max. 13 mm Needle Bar Stroke 30.7 mm Hook: auto-lubricating full rotary hook Industrial Sewing Machi.
  • ✅It comes complete with sewing machine table and Electronic DC Servo Motor 3/4 H.P, 1 PHASE, 110 VOLT, 0 ~3300 RPM,(drawer, belt, tools, led lamp and instruction manual PDF format ) brand new ✅ Includes: Thread Stand Bobbin Winder Oil Pan/Knee Lifter 5 Extra Bobb....
Check Stock

hoodlaces Brand Polyester Replacement Hoodie String - Drawstring - Shoelace with Free Threading Tool (Pink, 1)

  • Swivel nozzle and pump assembly with 54-foot hose deliver 50 percent more oil per stroke than competitor models for a longer die life.
  • Ergonomically designed pipe threading oil pump features 2-finger trigger to reduce hand fatigue during extended periods of use.
  • Heavy-duty, leak-proof, crack-proof 1-gallon (3.75 liter) oil reservoir improves productivity by reducing the need for frequent refills.
  • Thread oiler's integrated design eliminates messy leaks at the hose-reservoir connection.
  • Patent-pending twist-and-lock drip pan fits squarely on the reservoir to capture spillage and drips from thread oiler.
Check Stock

90430-12031 Oil Drain Plug Gaskets Qiilu 50pcs Engine Oil Drain Plug Gaskets Crush Washer Oil Drain Plug for Toyota for Lexus Metal Aluminium Alloy OEM Parts Replacement

  • ...lug on the oil pan to prevent oil leakage, otherwise your engine environment will be damaged. Install this gasket to ensure that the oil drain plug is properly sealed on the oil pan.
  • Practical Accessory---- Ensure that the drain plug is not tightened too tightly and jams, thus damaging the drain plug and the oil pan thread. Proper fit with the drain plug ensures a tight seals. Our crush washer oil drain plugs are snug and flush, providing a tighter and firmer fit than plastic or rubber seals.
Check Stock

Empi 00-9909-0 Oil Change Gasket Kit 2 Kits

  • DESIGNED FOR IMPERFECT SEALING SURFACES -- Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces.
  • SUPERIOR SEAL -- Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan.
  • PREVENTS OVERTIGHTENING -- Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable).
  • OE-STYLE REPLACEMENT GASKET -- Engineered for OE-style molded rubber gasket replacement.
  • EVERY PART FOR THE REPAIR -- Fel-Pro gasket sets include every part needed for the repair unless otherwise noted.
Check Stock

Seymour STR-662 1\ STA-LOK Repair Kit

  • Easy to use,convenient to operate,saves effort and time in use..
  • Using thread insert to convert mm---inch screw hole, it is convenient and fast..
  • The steel wire screw sleeve is assembled in the screw hole of aluminum alloy and other materials, which can form standard internal thread with high strength, wear resistance and high accuracy..
  • When there is thread machining error or repair of damaged internal thread hole, using steel wire screw sleeve as repair means, it can be used to repair the thread hole economically and effectively.You can also use the same screw after repair..
  • Typical applications: high-voltage switchgear, microwave communication, auto parts, air separation equipment, radiator, etc.
  • Parts thread hole repair, such as injection molding machine template thread hole repair.
  • Imported equipment or machinery thread dam.
Check Stock