Reviews Oil For Direct Injection Turbo Engines

Liqui Moly 2207 0W-20 Special Tec AA Motor Oil, 1 L

  • Fully synthetic low viscosity premium class motor oil, developed to meet the high demands of modern Asian and American gasoline engines..
  • The innovative additive technology guarantees best wear protection and engine cleanliness, lowest oil and fuel consumption and highest engine efficiency..
  • Ideally suited for engines with direct injection (GDI) and turbochargers.
  • Use with extended oil change intervals as per manufacturer..
Check Stock

BG 44K Fuel System Cleaner and Bg109 EPR Engine Performance Restoration 11 Fl Oz

  • Directions: add full contents to gas tank at least every 3,000 miles.
  • treats up to 42 gallons, highly recommended for all direct injection and turbo engines..
  • Severe formulation cleans the entire fuel delivery system and helps aid the phase separation occuring in fuel..
  • Helps aid loss of fuel economy, poor accelertion, engine hesitation and knock.
  • Helps remove intake and exhaust stem gum.
Check Stock

EBJ Replacement for Curtis DC Controller 1204-027 PMC 36V 275Amp Series Motor Controller Compatible Replacement for EZGO Golf Cart 1204-009 1205-117 NEW

  • 【Fitment】Universal Adjustable Boost Controller fit for turbo engines.
  • 【Function】O2 sensor voltage A/F value can be displayed. Displays A/F ratio as RICH or LEAN via 2 colors LED. This Turbo Device is equipped with a parking Brake safety function which will keep the car from moving forward when idling in the count down function..
  • 【High Performance】This Turbo Device is equipped with a parking Brake safety function which will keep the car from moving forward when idling in the count down function. Installation instruction is include,please read carefully when you install.
  • 【Direct Replacement & Easy Installation】Direct replacement, plug and play with no modification needed. Made by OEM approved manufacturer, meets or exceeds OE standard, easy to install.
  • 【Quality Guaranteed】Provides 1-Year Warranty and friendly customer service, solve your questions in time.
Check Stock

Viewer Questions: Fuel System Requirements When Converting From Gas to Diesel

  • 【Accurate Fuel Injection】Air-cooled diesel engine four-stroke single cylinder adopts direct injection fuel system with good atomization to achieve accurate fuel injection and save fuel for you. Commodity parameters:Crankshaft: Horizontal,Size: 13.2 * 14.96 * 16.3 inches,Net weight : 59.5 lb,Material: aluminum alloy box,System: direct injection fuel system,Rated power: 3.6kw,Displacement (L): 0.247,Fuel tank volume (L): 2.5,Engine speed: 3600r / min..
  • 【Speed Control Handle】Diesel motor engine can be positioned at any speed, equipped with throttle cable mount, you can install the throttle cable as needed..
  • 【Fast Heat Dissipation】4 Stroke single cylinder air cooled vertical engine has an air-cooled diesel engine made of aluminum alloy with reinforced and thickened treatment, which makes it have good heat dissipation and protect the machine..
  • 【Small Space Occupation】Tiller crude oil engine has compact structure and small size, occupying less space than other engines..
  • 【Wide Range of Application】Heavy duty single cylinder air- cooled diesel motor engine is suitable f....
Check Stock

Pennzoil Platinum Euro Full Synthetic 0W-40 Motor Oil (1-Quart, Single)

  • Made from Pennzoil's patented gas-to-liquid PurePlus Technology combined with a high-performance additive system for complete protection.
  • Nothing keeps your engine closer to factory clean (based on Sequence VH and M-111 sludge test).
  • No other leading motor oil provides better protection from friction (based on Sequence IVA wear test).
  • Provides better fuel economy (meets the requirements of MB 229.5 which includes Fuel Economy Improvement (FEI) requirement as determined in industry standard gasoline engines).
  • Formulated to deliver faster low-temperature oil flow and protection in extreme heat.
  • Helps protect engines from loss of horsepower.
  • Provides protection against low-speed pre-ignition (LSPI) for modern turbocharged direct-injection gasoline engines (based on Sequence IX LSPI test run at an independent laboratory).
  • Exceeds the following industry requirements: API SP and all previous categories.
  • Meets or exceeds the requirements of the following OEM specifications: Mercedes-Benz MB-Approval 226.5, MB-Approval 229.3, MB-Approval 229.5.
Check Stock

Tuningsworld Turbo Charger for Subaru Impreza WRX STI EJ20 EJ25 2002-2006, TD05-20G Upgrade Turbocharger 420 Horsepower

  • Applications: Fit for Subaru IMPREZA WRX / STI EJ20 EJ25 engine 2002-2006.
  • Upgrade Your Stock Turbo: This replacement turbo for Subaru can boost horsepower up to 420BHP. Cooling Type: Water and Oil Cooled.
  • 420 Horse Power: TD05-20G Turbo replaces the TD04 for a TD05H turbine wheel, upgraded to improve the exhaust efficiency and gain more power than the stock turbo.
  • Attention: All for WRX Wagon engines and automatic sedan engines came with a TD04,all manual WRX sedans including STI versions had a TD05 model. If your original turbo is TD04 model, some modification(connections, bolts, fixed screws etc.) is required..
Check Stock

Pennzoil 550042102 Axle 80-W90 (GL-5) - 1 Quart

  • ...EI) requirement as determined in industry standard gasoline engines).
  • Formulated to deliver faster low-temperature oil flow and protection in extreme heat.
  • Helps protect engines from loss of horsepower.
  • Provides protection against low-speed pre-ignition (LSPI) for modern turbocharged direct-injection gasoline engines (based on Sequence IX LSPI test run at an independent laboratory).
  • Exceeds the following industry requirements: API SP and all previous categories.
  • Meets or exceeds the requirements of the following industry specifications: Fiat 9.55535-Z2,.
  • Chrysler MS-10725, Chrysler MS-10850, Chrysler MS-12991.
  • Mercedes-Benz MB-Approval 226.5, MB-Approval 229.3, MB-Approval 229.5.
Check Stock

6.5L Turbo Diesel PMD Fuel Pump Driver Module for 1994-2002 Chevy GMC, FSD 19209057 12562836

  • PMD Module Fitment - 6.5L fuel pump module driver, PMD, FSD for all 1994-2002 Chevrolet GMC 6.5 liter diesel engines, all detroit diesel engines.
  • Replace # - This 6.5l turbo diesel injection fuel pump drive module replace 12562836, 1929057.
  • Features - This 6.5l pump mounted driver PMD FSD, which can directly replace damaged or malfunctioning modules. It is installed on the diesel injection pump to help control the operation of the pump. Maintains proper fuel pressure over the full operating range of the engine. The fuel injector fuel pump drive worked as expected, noted the improvement in the engine performance immediately..
  • Installation - To install a new 6.5L PMD, the fuel injection pump must be tested for current. Worn fuel pumps burn them on the PMD. In most cases, the main cause of the failure is the exhaustion of the fuel pump. We also sell PMD relocation kits that can be installed in the engine compartment cooler section. Keep in mind that repositioning does not solve the fuel pump failure, it actually increases the resistance of the circuit and may fail more quickly through the length.
  • Service - We offer 6.5l pump mounted driver PMD 90-days shelf life, hassle-free return and money back policy, buy with confidence! If you have any questions ab....
Check Stock

ICP Sensor with Harness Kit, Injection Control Pressure, Compatible with Ford Vehicles - 7.3 Powerstroke E350, F250, F-350 Super Duty - Replaces F6TZ-9F838-A, F4TZ9F838A, 1807329C92, CM5227

  • Replacement Injection Control Pressure Sensor - The ICP sensor or Injection control pressure sensor is found on 's Powerstroke 7.3 L diesel engines. The ICP sensor is responsible for monitoring oil pressure being passed on to the PCM to pressurized fuel injectors using the IPR (Injection Pressure Regulator) for proper vehicle operation..
  • Compatible Replacement for Ford Vehicles With 7.3L Powerstroke Engines - 2003 E-350 Club Wagon | 1995 - 1998 E-350 Econoline | 1995 - 2002 E-350 Econoline Club Wagon | 2000 - 2003 Excursion | 1994 - 1996 F-250 | 1999 - 2003 F-250 Super Duty | 1994 - 1997 F-350 | 1999 - 2003 F-350 Super Duty |. The ICP sensor can easily be located inside the engine bay behind the alternator..
  • Replaces Part# 1807329C92, ICP102, F4TZ-9F838-A, F6TZ-9F838-A, CM5227. This ICP sensor found on 's 7.3L Powerstroke engines are popular for having oil leaks. If you are experiencing oil coming out of the ICP Sensor's electrical connector, weird noises on idle during first starts, hesitation or misfires then you may have a problem with your ICP sensor..
  • OEM Fit, Quality, Finish - While this is NOT a g....
Check Stock

maXpeedingrods TD05 Turbocharger for Subaru Impreza WRX STI EJ20 EJ25 2002-2006, Water + Oil Cooling TD05-20G Turbo Charger

  • 【Fitment 】: Compatible for Subaru IMPREZA WRX / STI EJ20 EJ25 engine 2002 - 2006. Cost-efficient replacement turbo can boost horsepower up to 420BHP.
  • 【Upgrade Version】: TD05-20G Turbo replaces the TD04 for a TD05H turbine wheel, enlarges the turbine housing area to 7 square cm to improve the exhaust efficiency, thus gain more power than the stock turbo.
  • 【Notice】: All for WRX Wagon engines and automatic sedan engines came with a TD04,all manual WRX sedans including STI versions had a TD05 model. If your original turbo is TD04 model, some modification(connections, bolts, fixed screws etc.) is required.
Check Stock