Reviews Oil Filter Wrench Socket Set

Oil Filter Wrench and Drain Tool Set for Toyota Lexus Scion 2.0L to 5.7L Engines with Cartridge Style Oil Filter System Housings Fits Camry, RAV4, Highlander A7716F

  • High Quality: A ABIGAIL Toyota oil filter wrenches are forged from high quality 6061 T5 aluminum, which can bear tremendous pressure when you unscrew the extremely tight Toyota oil filter caps. and the surface is treated with a high quality black anodized finish to prevent corrosion..
  • Design: There are 4 slots on the bottom edge, which are mated perfectly with the tabs on the Toyota 15620-31060 oil filter cover and helps prevent slippage when you unscrew the oil filter housing with tremendous strength by a socket wrench or adjustable spanner..
  • Application: This 64mm 14 flute oil filter wrench fits all Toyota, Lexus, and Scion vehicles equipped with 2.5L to 5.7L engines that use Toyota's cartridge style oil filter system while it does not fit the 1.8L engine or vehicles that use disposable spin-on style oil filters..
  • Installation Instruction: Install the wrench on the filter cap indexing the tabs and unscrew it using either a 27mm socket or 3/8” drive ratchet. If the cap is severely over tightened we recommend using only a 27mm socket to avoid breakage..
  • Service: 100% satisfaction guarantee, If you have any issues with the oil filter wrench, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you s....
Check Stock

Heavy Duty Oil Filter Wrench for Toyota,Lexus,RAV4,Camry,Tundra,Highlander,Sienna and More-Cup Style Oil Filter Cap Removal Socket Tool for 2.5-5.7L Engine with 64mm Cartridge Style Oil Filter Housing

  • High Quality: A ABIGAIL Toyota oil filter wrenches are forged from high quality 6061 T5 aluminum, which can bear tremendous pressure when you unscrew the extremely tight Toyota oil filter caps. and the surface is treated with a high quality black anodized finish to prevent corrosion..
  • Design: There are 4 slots on the bottom edge, which are mated perfectly with the tabs on the Toyota 15620-31060 oil filter cover and helps prevent slippage when you unscrew the oil filter housing with tremendous strength by a socket wrench or adjustable spanner..
  • Application: This 64mm 14 flute oil filter wrench fits all Toyota, Lexus, and Scion vehicles equipped with 2.5L to 5.7L engines that use Toyota's cartridge style oil filter system while it does not fit the 1.8L engine or vehicles that use disposable spin-on style oil filters..
  • Installation Instruction: Install the wrench on the filter cap indexing the tabs and unscrew it using either a 27mm socket or 3/8” drive ratchet. If the cap is severely over tightened we recommend using only a 27mm socket to avoid breakage..
  • Service: 100% satisfaction guarantee, If you have any issues with the oil filter wrench, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you s....
Check Stock

TOYOTA Genuine OEM 00279-0WQTE-01 Oil (4 QUARTS)

  • STRONG AND DURABLE: This oil filter wrench is made of high-quality aluminum alloy, ensuring strength and durability. The surface of the oil filter cap removal tool is treated with a high quality black anodized finish, anti-rust and anti-corrosion to prolong the service life of the tool..
  • APPLICATION: Install the 64mm 14 flute cup style oil filter wrench on the filter cover, it can clamp and provide maximum torque with multiple contact points to rotate the extremely tight oil filter cover, and cooperate with a 27mm socket or 3/8” (10mm)drive ratchet wrench to loosen it..
  • APPLICABLE MODELS: Oil filter cover removal tool is suitable for most car models, such as Toyota, Lexus, RAV4, Camry, Tundra, Highlander, Sienna and More vehicles equipped with 2.5L to 5.7L engine that that use Toyota's cartridge style oil filter system. But the filter wrench does not fit the car with disposable conventional spin-on filters and 1.8L engine oil filter cap..
  • DESIGN: The bottom edge of the oil filter wrench has 4 slots for a perfect match with the vehicles using 15620-31060, 15620-36010, 15620-36020 oil filter housing covers. The tooth-like s....
Check Stock

Caldera Oil Filter Wrench For 1.8Liter Toyota, Lexus, and Scion Vehicles - Compatible with 64mm Oil Filter Cartridges and Caps On Corolla, Prius, Matrix, CT200h, iQ, and XD

  • This 64mm oil filter wrench fits Toyota, Lexus, and Scion vehicles with 1.8 liter engines and cartridge style oil filters.
  • Compatible with Toyota Corolla, Prius, Prius V, Matrix, Scion iQ, xD, and the Lexus CT200h.
  • Crafted from high strength aluminum, this oil filter wrench is designed to withstand high amounts of torque when removing tough oil filter caps.
  • The 14 flute design of this oil filter tool ensures a tight no-play, non-slip grip on 64mm Toyota, Lexus, and Scion oil filter housings.
  • The 1.8 liter oil filter wrench can be used with both a 3/8 inch drive ratchet and a 27mm socket. Use 3/8 inch drive for tightening, and 27mm socket for loosening.
Check Stock

36mm Oil Filter Socket Fits BMW, Ford, Mercedes, Mini, VW, Audi, Volvo, Porsche Vehicles and All With 36mm Oil Filter Caps, Heavy Duty Oil Filter Wrench 3/8' Drive 6-Point Oil Filter Removal Tool

  • High Quality: A ABIGAIL oil filter wrenches are made from super durable chrome vanadium steel, which can bear tremendous pressure when you unscrew the extremely tight oil filter caps. and the surface is treated with a finished matte chrome to prevent corrosion..
  • Application: This low profile oil filter socket is designed to fit vehicles equipped with a cartridge-style oil filter housing. Compatible with Ford F250 6.0, F250 6.4, various BMW, Mini, Volvo, Audi, VW, Porsche vehicles. Also can function as a fuel filter socket, compatible with some Duramax engines..
  • Low Profile Design: The oil filter socket is slim and thin which allows easier access to confined spaces. And the special 6-points hex wall holds securely on the oil filter without slippage..
  • Function: 36mm oil filter removal tool features 6-point hex to prevent rounding-off the filter canister. The 6 flat sides allow the oil filter wrench to grip the filter cartridge tightly and prevents binding..
  • Service: 100% satisfaction guarantee, If you have any issues with the oil filter wrench, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

GUGUGI 10 Pack Automotive Vinyl Wrap Felt Squeegee Soft Scraper Car Wrapping Tool Kits with Micro Fiber Felt for Auto Vinyl Wrap, Window Tint, Wallpaper Installation, 5Inch

  • 5PCS SET -- You will get 16mm & 17mm Engine Mount Socket Wrench, 18mm & 21mm Rear Camber Adjusting Wrench, 24mm Oil Filter Removal Wrench, all marked with the number. 12 point, tilt angle design, used with 3/8'' drive..
  • WHY NEED IT -- 1) 16mm/17mm wrench used for removing nuts from engine fixing screw. 2) Offset 18mm/21mm wrench for adjusting rear axle camber. 3) 24mm oil filter removal wrench for models with common rail engines with DSG gearboxes, help you change oil without removing the battery..
  • 1) 16MM & 17MM Engine Fixing Screws Wrench compatible with Mercedes Benz W124 W126 W140 W170 W201 W202 W203 W204 W210 W211 W219 W220 W221 models..
Check Stock

Keadic 2 Pcs Universal Oil Filter Wrench Set with Adjustable 3 Leg Oil Filter Remover Tools from 2-1/8 to 4-1/2’’ 54-115mm and 3/8 72 Tooth Quick Release Ratchet Torque Spanner Mechanical Tools

  • 【High Value Oil Filter Wrench Kit】You will get 1 pcs 3 jaws adjustable filter wrench and 3/8" drive 72 tooth quick release ratchet. The ratchet....
  • 【Durable Material & Long Service Time】Compared with other oil filter wrench on market, our oil filter removal tools are made of 45# carbon steel....
  • 【Oil filter Claw 】The 3-Jaw 2-Way Oil Filter Wrench could be adjusted to fit most oil filters from 2-1/2 to 4.5 inches (65 to 110 mm) in diameter.....
  • 【72-Tooth Drive Socket Wrench】Required Only a 5 degree swing arc. Precision ratchet design for increased productivity；Ergonomic TPR handle for a....
  • 【Universal Application】Compact structure and fits in tight spaces. Perfect remover the filters from 2-1/8 To 4-1/2 inch in all kinds of vehicles....
Check Stock

ABN Oil Filter Cap Wrench Metric 7-Piece Socket Set Tool Kit 24mm to 38mm for BMW Mercedes VW Paper Cartridge Housing

  • NO GUESSING: The ABN Oil Filter Wrench 7-Piece Socket Set Tool Kit includes 24mm, 27mm, 29mm, 30mm, 32mm, 36mm, and 38mm oil filter socket sizes so....
  • VARIETY OF VEHICLES: Fits vehicles with newer oil filter design.
  • Mercedes, Cadillac, Buick, Saturn, SAAB, Dodge, Ford, Mini Cooper, and some BMW and....
  • QUICK REMOVAL: Low profile short well 6-point design with a 3/8-inch socket drive for a ratchet or extension.
  • BUILT TO LAST: Constructed from chrome-vanadium (CR-V) steel for maximum strength and corrosion-resistance.
  • EASY STORAGE: Heavy-duty 8.5” x 4.5” x 2” inch (21.6cm x 11.4cm x 5.1cm) plastic blow-molded carrying case for easy transportation, safe....
Check Stock

Oil Filter Cap Removal Tool Aluminum Cup Wrench 64mm 14 Flute for Toyota Lexus Scion 2.5L to 5.7L Engines with Cartridge Style Oil Filter Housings Fits Camry, RAV4, Highlander, Sienna, Tundra and More

  • This aluminum cup wrench is a perfect removal tool for Toyota, Lexus, and Scion vehicles equipped with 2.5L to 5.7L engines that use Toyota's cartridge-style engine oil filter housing, while it does not fit the 1.8L engine or vehicles that use disposable spin-on style oil filters.
  • This extended life oil filter wrench is forged from high quality 6061 T5 aluminum, which can bear tremendous pressure when you unscrew the extremely tight Toyota oil filter caps.
  • The surface of this oil filter wrench is treated with high quality black anodized finish to prevent corrosion.
  • There are 4 slots on the bottom edge, which are mated perfectly with the tabs on the Toyota 15620-31060 oil filter cover and helps prevent slippage when you unscrew the oil filter housing with tremendous strength by a socket wrench or adjustable spanner.
  • What you will get are 1 metal cup wrench for removing oil filter and 100% satisfaction customer care.
Check Stock

Hromee Fuel Filter Cap Removal Tool and Installer 7 Pieces Low Profile Oil Canister Socket Set 24mm 27mm, 29mm, 30mm, 32mm, 36mm and 38mm

  • 7 PIECES - This fuel filter socket set includes 7 low profile sockets in sizes: 24mm, 27mm, 29mm, 30mm, 32mm, 36mm and 38mm so you can work on a variety of cars. A blow-molded plastic storage case to keep them organized..
  • FUNCTION - Used to remove and install the fuel filter cap when you replacing the old one. The socket is suitable for the oil filters with canister housing and plastic cap. Designed for use with any 3/8-inch drive sized ratchet or wrench..
  • SPEACIAL DESIGN - These low profile sockets are designed to help better access oil and some fuel filter caps in confined spaces. The 6-point hex design provides multiple contact points to engage the housing cap securely for maximum removal torque..
  • DURABLE - Made from durable chrome vanadium steel (CR-V) which provides longer lifetime and greater durability. The black phosphate coating surface ensures rust and corrosion resistant. The sizes are marked on the product body to make you pick up easily..
  • COMPATIBLE VEHICLES - Sockets Includes oil filter wrench sockets for foreign and domestic applications, fit Mercedes-Benz, Ford, Renault, Nissan, Dodge, Hyundai, Kia, Mini, Fiat, BMW, Audi, GM, Saturn, Pontiac, Chevrolet, Saab, and other vehicles..
Check Stock