Reviews Oil Filter Relocation Adapter

Engine Oil Cooler and Filter Housing Adapter Kit - Replaces 68105583AF, 68105583AE - Compatible with Chrysler, Dodge & Jeep 3.6L V6 Vehicles - 200, Town & Country, Grand Caravan, Wrangler, Ram

  • Replacement Engine Oil Cooler & Filter Housing Adapter Kit - With Intake Manifold Plenum Gasket Set - Keeps the engine oil clean as it circulates through the engine. This replacement Oil Filter Housing Adapter Kit also comes with a new oil filter pre-installed for a complete and worry free installation. If you are experiencing oil leaks above the transmission or near the cooler housing where the oil filter is then you may have a problem with your oil filter housing adapter..
  • Compatible Replacement for Dodge, Chrysler & Jeep Vehicles With 3.6L Pentastar V6 Engine - 2014 - 2017 200 | 2014 - 2017 300 | 2014 - 2016 Town & Country | 2014 Avenger | 2014 - 2017 Challenger | 2014 - 2017 Charger | 2014 - 2015 Durango | 2014 - 2016 Grand Caravan | 2014 - 2016 Cherokee 3.2L | 2014 - 2015 Grand Cherokee | 2014 - 2017 Ram 1500 | & more. See below for full vehicle list..
  • Replaces Part# 68105583AF, 68105583AE, 68105583AA, 68105583AB, 68105583AC, 68105583AD usually found on popular , Journey, Wrangler, Ram Promaster 1500, 2500, 3500 including year models 14, 15, 16, 17. The oil filter housing can easily be located above the engine and can be accessed by removing the intake manifold. It is best and practical to replace the whole housing rather than waste time....
Check Stock

GlowShift Oil Filter Sandwich Plate Thread Adapter - 20mm x 1.5 Thread - Install up to (4) 1/8-27 NPT Oil Pressure & Temperature Sensors - Includes O-Ring & Port Plugs

  • GlowShift Oil Filter Sandwich Adapter Allows Users to Install (4) 1/8-27 NPT Oil Pressure and/or Oil Temperature Sensors to the Oil Filter of Your Vehicle - Installs Between the Engine Block & Oil Filter.
  • Features (1) Aluminum Sandwich Plate Adapter with (4) 1/8-27 NPT Female Thread Ports, (1) M20 x 1.5 Thread, (4) 1/8-27 NPT Flush Mount Port Plugs & (1) O-Ring for a Leak-Free Seal.
  • Note: This Oil Filter Adapter is Only Compatible if the Gasket Diameter of Your Oil Filter is 3" or Less.
  • Includes Step-By-Step Installation Instructions.
  • GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.
Check Stock

Casart Bio Pressure Filter UVC 120V/60HZ Koi 1500-2500 Gal for Garden, Pool Fishpond Pump Filter Pond Filter

  • 【Quality Material & Excellent Performance】Made of high quality ABS material, which features great insulation function.
  • its maximum flow-through is up to 10000 L/H, suitable for decorative ponds of 2500 gallons and fish ponds of 1500 gallons..
  • 【4 Filter Sponges & Cleaning Indicator】Equipped with 4 filter sponges, which can be removed, washed or replaced, the filter ensures the balance of water flow . Yellow and blue sponge density is different to increase filtration efficiency. An indicator will float up to remind you that the filter needs to be cleaned..
  • 【Function Switch & Water Pipe Adapter】The switch on the top can be easily rotated to sewage and drainage through 2 exists, you can adjust it according to your different needs. The water pipe adaptors can match with different diameters of water pipes. There are different sizes of drain holes, which can be adapted to different water pipe widths..
  • 【Easy Solution for a Clear & Healthy Pond】This pressure filter is an effective sealed pressure filter system which uses biotechnology to keep your pond clean and healthy. The convenient handle allow for easy relocation, you can place it on the land or in the water..
Check Stock

SMALLRIG Cold Shoe Adapter Relocation Plate ONLY for Sony A6100 / A6300 / A6400 – BUC2317

  • 【ONLY FOR A6300/A6400】SMALLRIG Cold Shoe Relocation Plate BUC2317 is designed to provide an external cold shoe mount to connect microphone ONLY....
  • 【MICROPHONE RELOCATION】The relocation plate enables you to attach microphone without blocking the LCD screen and the built-in flash. With the cold....
  • 【SHOULDER STRAP HOLE】 The cold shoe relocation plate is equipped with a shoulder strap hole on the right side, which enables to connect different....
  • 【ANTI-SCRATCHING】The lightweight adapter features rubber pad on the bottom of the cold shoe piece to prevent the hot shoe from scratching.
  • 【HIGH QUALITY】Made of aluminum alloy, it’s light in construction yet extremely strong.
Check Stock

JDMON Universal Adjustable 3 Jaw Oil Filter Wrench Remover Tool for Removing Oil filters Range 2.4 inch from 3.8 inch in Diameter Include 1/2”-3/8” and 1/4”-3/8” Drive Adapter

  • Adjustable Fit: The oil filter wrench can remove the oil filter from 2-1/4 inch to 3.8 inch(60mm-95mm) ,fit 1/4 & 1/2 inch square driver ratchet or 3/8 inch wrench which can remove various models of vehicles..
  • High Hardness Material: The oil filter wrench is made of carbon steel which is much stronger than normal material and more durable and handy to remove oil filter.
  • 3 Jaw Design: The tool is designed 3 jaw anti-drop design with firm hold on filter, helping users remove filters quickly, with less slip and without hassle. Claws fit tighter as more torque is applied..
  • Compact Design: This oil filter remover provides a low clearance, helping users dislodge filters even in tight spaces..
  • Added 2 Drive Adapter : Not only the oil filter wrench, but also 2 pcs Drive Adapter are included in box to provide the extra Drive for your oil filter.
Check Stock

HAPPYGRILL Pond Filter 4000 Gallons Pond Pressure Bio Filter with 13W UV Light Fishpond Pump Filter for Garden Pool

  • 【Easy to Clean Your Pond】 This pressure filter is an effective sealed pressure filter system which uses biotechnology to keep your pond clean and healthy. The convenient handle allow for easy relocation, you can place it on the land or in the water..
  • 【Quality Material and Great Performance】 Made of high quality ABS material, which features great insulation function.
  • its maximum flow-through is up to 10000 L/H, suitable for 4000 gallons pond.
  • 【4 Filter Sponges with Cleaning Indicator】 Equipped with 4 filter sponges, which can be removed, washed or replaced, the filter ensures the balance of water flow . Yellow and blue sponge density is different to increase filtration efficiency. An indicator will float up to remind you that the filter needs to be cleaned.
  • 【Functional Switch and Water Pipe Adapter】 The switch on the top can be easily rotated to sewage and drainage through 2 exists, you can adjust it according to your different needs. The water pipe adaptors can match with different diameters of water pipes. There are different sizes of drain holes, which can be adapted to different water pipe widths..
  • 【Warm Tips and Our Service】 The sponge need to be cleaned regularly, it depends on the water quality. If the product is damaged or has ....
Check Stock

Engine Oil Cooler Filter Housing Kit with Gaskets, Cap & Seals - Replaces 55566784, 88179-91400 - Compatible with Buick & Chevy 1.4L Vehicles - Encore, Cruze, Cruze Limited, Sonic, Trax

  • Replacement Engine Oil Cooler & Filter Housing Assembly - With Gaskets, Cap & ACM Seals - Keeps the engine oil clean and cool as it circulates through the engine. This replacement Oil Filter Housing Adapter Kit also comes with a new oil filter pre-installed for a complete and worry free installation. If you are experiencing oil leaks above the transmission or near the cooler housing where the oil filter is then you may have a problem with your oil cooler and filter housing..
  • Compatible Replacement for Buick & Chevrolet Vehicles with 1.4L L4 Engine - 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 Encore | 2011-2015 Cruze | 2016 Cruze Limited | 2012-2018 Sonic | 2013-2021 Trax |. The oil filter housing can easily be located above the engine and can be accessed by removing the intake manifold..
  • Replaces Part# 55566784, 918-428, 650039, 88179-91400, 55593189, 55594651, 55565385, 55565388 usually found on popular Encore, Cruze, Cruze Limited, Sonic Trax including year models 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21. It is best and practical to replace the whole housing rather than waste time trying to find where the leak is as it can be from the cracks on the housing or seals..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM....
Check Stock

WEILEITE 3.6 Engine Oil Cooler Filter Housing

  • *NEW UPGRADED QUALITY & Improved Manufacturing. Products made in better raw material, Seal upgrade, New Fluororubber gaskets are more durable and prevent leaks better. Make the engine oil cooler have a longer service life..
  • A good oil cooler filter adapter will help prevent oil leaking, keep the engine room working at the normal oil temperature and oil pressure, make you have a safe and pleasant journey..
  • This Engine Oil Cooler Filter is Compatible with 2013 Ram 1500 6 Cyl 3.6L.
  • 2012 2012 2013 Ram C/V 6 Cyl 3.6L. Adapter-Engine Oil Filter, OE No. 5184294AE.
  • Replacement for 2011 2012 2013 Chrysler 200,300,Town & Country.
  • Dodge Avenger,Challenger,Charger,Durango,Grand Caravan,Journey.
  • Jeep Grand Cherokee,Wrangler 6 Cyl 3.6L..
  • Any questions please contact us, we are always here to provide professional help! ***All products are produced according to standard specifications and have been quality-verified before leaving the factory. Some customers think that the size of the product is not suitable, it may be that your model is a little different, and you can use it with simple modifications..
Check Stock

Dorman 918-258 Automatic Transmission Oil Cooler Compatible with Select Dodge Models

  • Jeep Models.Only for 3.6L 6 cyl (V6) Engine.(For more detailed models and years, please refer to product details)..
  • OEM:68105583AF,68105583AE,68105583AA,68105583AB,68105583AC,68105583AD,68105583A,MS97204,MS19879,MS97205,MS19878..
  • FUNCTION:The engine oil is filtered through the Oil filter housing adapter assembly,It keeps the engine clean and cool, extend the service life..
  • ADVANTAGES:This replacement Oil Filter Housing Adapter Kit also comes with a new oil filter pre-installed for a complete and worry free installation..
  • SUPPORT:At PTNHZ, if you have any question about our product, please contact us right away, we can handle any problems..
Check Stock

KIPA Oil Filter Adapter Replace for Small Block Chevy V8 Engines SBC BBC Spin On Bypass 305 307 327 350 400 396 402 427 454 # 3952301

  • Top Quality Well-Machined KIPA Oil Filter adatper, keep your vehicle oil cooler intact. Bolts right up and fits.
  • MPN: Directly replacement Part Replace for Part # 3952301.
  • Fitment: This oil filter adapter replaces for the Chevy Small and Big Block V8 Engines SBC BBC 305 307 327 350 400 396 402 427 454. Please do match the OE Part Number and the Adapter structure..
  • It Fits the following engines using a spin on filter wix 51069,AC PF25,Morose 22459 from 1968-1986.
  • Important Notice: Two bolts as pictured comes with the adapter, there is no gasket needed to install this part. If you put a gasket on this product it may come apart and get sucked into your motor causing oil pressure loss and damaging the engine badly if not destroying it..
Check Stock