Reviews Oil Drilling Products

1PC Glass Capillary Viscometer, 1833 kinematic viscometer, Downstream Flat viscometer, Overall Length Between 260 and 270 mm

  • Volume of cup: 44ml, Efflux time(sec): 20-80sec.
  • All 5 models, test viscosity from 10-1800 centistokes (cSt).
  • Meets ASTM D4212 standard quickly measure the viscosity of liquids such as Paint,Ink,Varnishes,Syrup and Oil..
  • The Stainless Steel Cups are molded precisely and the orifices are precision drilled using high-speed CNC drilling..
  • BAOSHISHAN Zahn Cups with solid construction are used to measure the flow behavior of liquids such as paints. Applicable to the construction site to quickly measure the viscosity of the paint to be sprayed.
  • more widely used in electronic products, plastic coatings industry, home made sauce, hydraulic oil and liquid viscosity in lab..
Check Stock

CM Concepts Gas/Liquid Can Replacement Long Spout & Vent Kit-Ultimate Package

  • ...bber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, we provide two oil cans with vent caps,(gas con vent caps-A is used for oil cans without a vent at the end of the oil can,All you need is a simple drilling and installation and you are ready to use.) (gas con vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps.).
  • Simple to install,Each set of products includes,12 Screw Collar Caps(6 Coarse Thread & 6 Fine Thread) 6 yellow Spouts and rubber gaskets, 6 nozzle caps with threads，2 kinds of gas con vent caps . And the drill bit needed to install the gas con vent caps . During the installation and use process, if you need assistance, you can contact us, and we will serve you as quickly as possible..
Check Stock

Machining and Grinding Fluid | Fusion Cool 2240 | General Purpose Coolant for Cutting and Grinding Machine Shop Operations | Semisynthetic 1 Gallon

  • Fusion Cool 2240 is a top cutting oil for drilling metal. This cutting fluid product is perfect for machining of many kinds of metals. Works well for grinding, milling, CNC machining, tapping, turning..
  • Works well for bandsaw cutting, drilling, tap and die, drill bit cutting, worm drive saw, and many more cutting applications..
  • Superior sump life with ultra-low odor and mist. Direct Cross-Over / Replacement for Trim SC 520.
  • Environmental friendly, recyclable coolant.
Check Stock

Eagle UI-50-FS Red Galvanized Steel Type I Gasoline Safety Can with Funnel, 5 gallon Capacity, 13.5\ Height, 12.5\ Diameter,Red/Yellow

  • ...rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, we provide two oil cans with vent caps, (gas can vent caps-A is used for oil cans without a vent at the end of the oil can, You only need simple drilling and installation to use.) (gas can vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps.).
  • Simple to install,4 Each set of products includes,6 Screw Collar Caps(3 Coarse Thread & 3 Fine Thread) 3 yellow Spouts and rubber gaskets, 3 nozzle caps with threads, 2 kinds of gas con vent caps, And the drill bit required to install the gas discharge cap. During the installation and use process, if you need assistance, you can contact us, and we will serve you as quickly as possible..
Check Stock

Aopin Forstner Drill Bits Professional Carbide Woodworking Hole Saw, Cutting Diameter 22mm, 2Pcs (Blue, Silver)

  • Applications: Can be used for drilling holes on wood and wood products perforation, plastic products, furniture, door hinge..
  • Features: Special heat treatment, cemented carbide. Arc design optimizes chip removal. two blade cutter head, Low cutting resistance. the design of the Forstner drill center point can precise positioning without slipping, sturdy round handle..
  • Instructions: Suitable for hand-held electric drills, portable percussion drills, CNC equipment, engraving machines, bench drills, vertical drilling machines, and other woodworking milling and drilling equipment..
  • Package Content: 2 x Carbide Forstner Bits..
Check Stock

Masonry Drill Bits Set (11PCS),Concrete Drill Bit Set for Glass,Tile, Brick, Cement, Concrete, Plastic, Cinder Block, Wood etc with Industrial Strength Carbide Tip,1/8\-1/2\ by amoolo

  • 【 11 PIECES SATISFY ALL YOU DEMAND】Masonry Drill Bit Set includes : 1/8" (3"Length*2), 1/4" (4"Length*2), 1/4" (6"Length*2), 5/16 (6"Length*2), 3/8" (6"Length*2), and 1/2" (6"Length*1)..
  • 【DURABLE INDUSTRIAL GRADE CARBIDE TIPS】amoolo Carbide Drill Bit Set are built for longevity excellent abrasion resistance, will stay sharper and make the drilling much more easier ；Drilling faster holes in bathroom tiles, or wall mirrors..
  • 【CUT PERFECT CIRCLES HOLES】U type slot design with fast drilling dust remove；3-flats shank allows drill bit to be held tightly and stably in power drill；Spiral shank increases cutting speed and prevents slipping,Please cooling with water and control the speed when drilling, then dry the water or apply the oil to prevent rusting after used..
  • 【MULTIPLE APPLICATION】Masonry Tile Drill Bit Set for use with electric or cordless hammer drills, Ideal for fast and efficient drilling through TILE, BRICK, CEMENT, CONCRETE, GLASS, PLASTIC, CINDERBLOCK, WOOD etc.×NOT for tempered glass drilling( (e.g. car glass)).Cannot be used on tempered glass (e.g. car glass)..
  • 【 WARRANTY 】If you are not fully satisfied for any reason, please contact us via Amazon for 100% refund or replacement..
Check Stock

Baorder 6Pcs Auger Drill Bits,High-Carbon Steel Four Slot Wood Drill Bit Set for DIY Woodworking Hole Opening Drilling Tools (14mm, 16mm, 18mm, 20mm, 22mm, 25mm)

  • 【Premium Material】–Auger drill bit made of High Carbon Steel, hardened and tempered for longer useful life.
  • 【Unique Design】–Four slot design for faster chip ejection, full screw-point tip, allows bit to self-feed for ease of drilling.help to improve work efficiency.
  • 【Fit Machine】–Suitable for pistol drill, bench drill, vertical drilling machine hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine, etc.
  • 【Widely Used】–Used for wood products perforation, mounted spherical door shoot tip, drawer, plastic products, wood, plywood, etc.
  • 【What You Get】–6Pcs different size four-slot drill bits : 5/9″(14mm), 7/11″(16mm), 5/7″(18mm), 11/14″(20mm), 13/15″(22mm), 63/64″(25mm), meet your different needs.
Check Stock

Keyfit Tools Power Anchor (8 Pack) Self Drilling Stakes for Pop-Up Portable Ice Fishing Shelter House Self Drilling Stake Anchor

  • Keyfit Tools Power Anchor Self Drilling Stakes for Pop-Up Portable Ice Fishing Shelter House Self Drilling Stake Anchor.
  • Self Drilling Cutting Tip Solid Steel ~ Case Hardened Grade 8 Steel Heat Treated & Tempered For Extreme Durability.
  • Use with or without Secura Strap for Easy Anchoring High Winds No Problem ~10 inch length for Extra Anchoring.
  • USE DRILL ON SLOW SPEED with down force. Let the screw threads cut into the ice making a groove for them selves. Too much speed will strip the ice. Does Not Include Drill.
  • See All The Keyfit Tools Products On Amazon ~Keyfit Tools Patented Products.
Check Stock

5PCS Dry Diamond Drill Bits Set for Granite Ceramic Marble Tile Stone Glass Hard Materials (not for Wood), Round Shank 1/4, 5/16, 3/8, 1/2 inch

  • Specifications : drilling holes diameter of 2PCS 1/4 inch(6mm), 3/8inch (10mm), 5/16inch (8mm) and 1/2inch (12mm).
  • Versatile: Great for drilling clean holes to hard materials especially tile, glass, slate, marble, granite and other stones (not for wood).
  • Dry Drilling Design: Diamond Drill Bit integrated with cooling wax inside which melts while dry drilling and cools the cutting surface lubricating.
  • No need to add water, direct dry drilling（When dry drilling, be careful not to drill continuously. After drilling a hole, wait for the hole opener to cool down before continuing to drill.
  • when adding water, you can drill continuously to prolong the life of the bit）.
  • Compatibility: compatible with most machines such as Hand Drill, Angle Grinder, Bench Drill。（Hand Drill: need more than 48V power model.
  • Angle Grinder: need to adapt to the adapter.
  • Bench Drill: need more than 600W power model）.
  • Worry Free: If you encounter any problems in using the products, please feel free to contact us for satisfactory customer service.
Check Stock

Gas Can Spout Replacement Improved Design Flexible Pour Nozzle Kit with Gasket Stopper Vent Cap Collar Caps for Old Style Water Gas Container Jug Pack of 3

  • ... sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, We offer two types of gas can vent caps, (Gas Can Vent Caps-A) is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use. (Gas Can Vent Caps-B) is used for another oil can with a vent cap at the tail, Can replace old vent caps..
  • Simple to install, Each set of products includes, 4 Screw Collar Caps (2 Coarse Thread &2 Fine Thread) 2 yellow Spouts and rubber gaskets, 2 nozzle caps with threads，2 kinds of gas can vent caps, And the drill bit required to install the gas discharge cap. During the installation and use process, if you need assistance, you can contact us, and we will serve you as quickly as possible..
Check Stock