Reviews Oil Cooler Hose Fitting
PQY 16 Row AN10-10AN Stacked Plate Oil Cooler 6AN 8AN Adapter Universal Engine Transmission Aluminium Alloy
- For Universal Fitment. May require some modifications to fit certain vehicles.For modified street vehicles which are driven hardly with racing track use..
- 16 row oil cooler reduces coolant temperature and extend engine life..
- Cool down engine oil, transmission and rear-differentials like a radiator.Keep the oil temperature low to prevent damage, or even seizure of the engine.Improve lubrication and power performance. Maintain oil viscosity. Save fuel..
- Can used to connect the 8AN / 6AN braided fuel line hose end. Inlet / Outlet Size: AN-10.
- Package include:1x 16Row Stacked Plate 10AN Oil Cooler,2x 10AN Female to 8AN Male Fitting Adapter,2x 10AN Female to 6AN Male Fitting Adapter.
Check StockMR HELLO Thread Adapter Straight Fitting 5/8x24 Anodized Aluminum Black Flare Reducer Hose Union
- Oil Filter Thread Adapter Straight Fitting fit all oil cooler fuel tank fuel pump fluid Line..
- Flare Hose Union Oil Tank Fitting Fits commonly available filters such as:STP S3600 FRAM PH33600 Purolator PSL30001 NAPA 4003 WIX24003.
- Fitting Size:Female 5/8-24 to Male 3/4-16 13/16-16 3/4 NPT.
- Materia:these Automotive Threaded Adapter is made of aluminum 6061.
- NPT threads creates a seal by a wedging action.It is a tapered threads and can give an effective seal for pipes using hydraulic fluids..
Check StockDorman 625-209 Engine Oil Cooler Hose Assembly Compatible with Select Cadillac / Chevrolet / GMC Models
- Ideal replacement - this engine oil cooler hose assembly is a direct replacement for the original hose assembly.
- Quality materials - this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler.
- Easy to install - no special tools required.
- Quality tested - rigorous quality control ensure this hose assembly conforms to product standards.
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check StockSINTLY 3/8\ NPT to 6AN Flare Male AN6 Straight Fitting Union Flare Adapter Aluminum Black 2Pcs
- 【Tips】To obtain a proper seal in the NPT joint, you need to use a sealant compound or PTFE tape. The thread is sealed by wedging. The NPT connection cannot be reused. When accessories are reused, this can cause wear or increase the possibility of leakage..
- 【37 Degree Flare Fitting Taper】:The 6an male flare to 3/8" NPT fitting has one male side AN is a 37-degree flare fitting taper and the other male side NPT is a 60 degree tapered threads. These adapter hose fittings are designed to quickly make professional 37° AN connections from NPT tapered pipe threads. Designed for smooth flow that gives better fluid flow, tight security, and leaks free.
- 【Application】-6AN to 3/8" NPT straight flare to pipe adapter is widely used in kinds of liquids, oil, Water, Air, Fuel lines, E85, gas, etc. Bulkhead Fitting is perfect to apply in automotive, industrial, boat/marine, etc. The male flare fitting fit all oil cooler / fuel tank / fuel pump/fluid Line/turbo..
- 【Material & Features】Made of High-Performance Lightweight 6061-T6 Billet Aluminum Material. All threads are designed for the maximum percentage of engagement. One side is AN standard and the other is NPT National Pipe Taper Thread. Each straight fitting is completed with a black anodized fini....
Check StockLTI Universal 10ft Nylon Stainless Steel Braided 5/8\ AN10 PTFE E85 Fuel Line Hose Injection (BLACK, 10AN)
- ...along with a braided Black Nylon outside which gives them high durability, extreme pressure resistance, and Professional installation is highly recommended..
- 10AN PTFE E85 Fuel Hose Length: 10ft. Inner Diameter: 0.5" (12.95mm). Outside Diameter: 0.62" (16mm) . Please measure before purchase! Fit for AN PTFE hose end fitting ONLY..
- We Provided 12 months warranty from the date of purchased. Free return within 30 days NO QUESTION ASK..
Check Stock8AN 20FT Fuel Line Hose Kit with End Fittings Nylon Stainless Steel Braid Black 1/2' - 11.12mm ID (AN8)
- 【Includes】The 8AN nylon and stainless steel braided CPE fuel line kit includes: 10pcs 8an CPE hose ends (4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends) and 1/2 CPE braided fuel line (Length:20ft/6M).
- 【Materials】The 8AN CPE fuel line Hose mostly used in cooler system and pump, fuel system, transmission system, Can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, coolant, fuel, and etc, but not applicable to E85..
- 【Lifetime】The 8AN CPE hose working temperature range: -40℉ to 257℉ (-40℃ to 125℃). It is compatible with nearly every substance or agent used. Maximum Working Pressure (psi): 500 psi. Bursting Pressure (psi): 2000psi..
- 【CPE Hose】The 8an CPE hose fitting is reused, just replaced a new olive/ferrule when reusing fittings with CPE hose. CPE tube is constructed with a seamless extruded CPE resin inner tube..
- 【Warranty】Three months limited warranty & Free lifetime technical support..
Check StockTransmission Cooler Hose Fitting Fit for Chevy Ford Mopar GM GMC Buick Cadillac Cars and Trucks Stainless Steel Braided Lines Replace TH350/ 700R4/ TH400 -52 Inch
- Fitment - Transmission cooler hose fitting fit for Chevy Ford Mopar GM GMC Buick Cadillac Cars and Trucks..
- Product Size- This stainless steel flexible braided transmission hoses, each 3/8" inner diameter hose is approximately 52" in length, and comes with....
- Replace Number - Transmission cooler hose fitting replace number is TH350 700R4 TH400..
- Compatible with -The universal kit is perfect for your Rat Rod, Hot Rod, Street Rod, Muscle Car, Custom and more.
- Package Include - AN-6 flared to 1/4" NPT billet adaptors, fits most 700R4, TH350, TH400.
- Please check fitting size prior to ordering (Some are 1/4"....
Check StockDialed: The secret math of a perfect mountain bike setup
- [Great Valve Package] In this package, you will get 4pcs brake lever covers and 4pcs compression nuts, 6pcs protective sleeves, 4pcs oliver and 4pcs inserts, 1 roll 2500mm bicycle hydraulic disc brake hose, 1pc bicycle hydraulic hose fitting insert tool and 1pc hydraulic hose cutter, total 25pcs. Complete kit can fully meet your needs, which is ideal for Shimano BH59 System, you don’t need to find and buy other accessories, saving your time and money..
- [Reliable Material] Brake hose is made of high-quality material and nylon coating, which is durable and stable. 2500mm length pipes can be cut according to your needs. Precision made with fine workmanship, high temperature and low temperature resistance, high blasting coefficient and enough safe. Needle driver insertion tool is made of aluminum alloy CNC process, it feels good and durable..
- [Hose Fitting Insert Tool] It is easy to use, super utility needle driver insertion tool. Attached hydraulic hose cutter, sharp and achieve precise and smooth cutting, clean and no burrs. Quick change adapter design, it can match with all needle driver olive and barb on the market, making maintenance easier..
- [How to Use] You can install hose fitting cleanly and gently. First, put the olive into the oil pipe, seco....
Check Stock6AN 5Feet Stainless Steel Nylon Braided Fuel Line Hose Oil Gas Hose Oil Line Hose Silver
- 【Material】Outside Hose Material: Coverd with High Quality Nylon and Stainless Steel Wires.
- Inner Hose Material: CPE Synthetic Material Hose..
- 【CPE Braided Hose】Mostly can be work with coolant, diesel, oil, hydraulic fluid, pump gas, air and fuel. Please notice that the service life might be shorter when it work with fuel..
- 【Application】This braided hose can be used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, and transmission system, oil cooler kit, ect..
- 【Performance】Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
- 【Note】Not recommended installation in corrosive environment, braided fuel line's service life will be influenced..
Check StockRac Performance 8AN to 10AN Expanding Hose Fitting 8AN Female to 10AN Male Flare Extender/Reducer Aluminum 8AN to 10AN - 2Pack Black
- 8AN Female to 10AN Male Flare Hose Union Expander.
- Black anodized finish for great appearance and suitable for most fluids.
- Made of high‑quality lightweight 6061-T6 aluminum material for strong strength.
- Fuel Hose Line Fitting fully compatible with gasoline and alcohol based fuels.
- Universal application for Oil cooler / Gas / Water / Fuel tank / Fuel pump/ Fluid Line/ Air Line.
Check Stock