Reviews Oil Cooler Flange

CELAENO Kitchen Sink Garbage Disposal Flange and Stopper Durable Gunmetal Black/Gray Stainless Steel Sink Flange with Nano Surface Fits 3-1/2 Inch Standard Sink Drain Hole

  • High Quality: This sink flange with stopper is made of top grade 304 stainless steel. Solid construction for durable and long service life..
  • Oil Free Tech: The gunmetal black/Gray kitchen sink flange with Nano Surface works like water on Lotus leaf, non-oil stick, no water trace....
  • Match Condition: Fits 3.5 Inch standard drain opening, the gunmetal black/gray garbage disposal flange and stopper color will be slightly bright than....
  • Easy to Install: You just need to make a tight seal with silicone sealant at the bottom of the flange and the top of the sink drain opening..
  • Easy to Remove Garbage: The garbage disposal flange stopper can block the drain effectively and help you hold water. Pulling up the stopper allows you....
Check Stock

6.0L Powerstroke Oil Cooler Flush Kit,Blue Anodize Adapter Flush Adapter for Ford 2003 2004 2005 2006 2007 2008 2009 2010 Diesel

  • Made of by high quality aluminum and Brass,prevent high oil temperature result in costly fuel systems and engine failure.Instead of spending a high price to replace the 6.0-liter oil cooler, it is more appropriate to spend a little free time to clean it. And our products can be used repeatedly..
  • With our 6.0L Power Stroke Oil Cooler Flush Kit, the oil cooler can be backflushed in less than an hour. By directing the water flow in the opposite direction of normal travel, contaminants are removed and, in most cases, the cooler is restored to new effectiveness..
  • No need to remove the plant cooling manifold. Coolant enters the cooler from the oil cooler, and when disturbed, the quick connection hose between the oil cooler and the cooler will usually start to leak, resulting in rewinding. Our device will not interfere with the original connection..
  • It is advisable to regularly monitor the Delta T (difference between oil temperature and coolant temperature) while operating the engine under load. If the temperature difference exceeds specification we recommend performing an oil cooler flush. Careful attention to this detail can prevent thousands of dollars of engine and fuel system damage. In the case of a cooling system that has experienced extreme neglec....
Check Stock

Club Car Golf Cart OEM Cooler Sandbox Mounting Bracket 103886801

  • Fits Club Car Precedent,TEMPO and Onward with Ice Cooler/Sand Bucket..
  • High-Quality:Thick and sturdy, it is good for stabilizing your Ice Cooler or sand bucket..
  • NOTE:Please confirm whether suitable before purhasing.Only suitable for 2-seater cars, not suitable for 2+2..
Check Stock

Derale 13950 Atomic-Cool Remote Cooler , Black

  • Universal:universal oil cooler,you may need to do some custom modifications and require other hardware to meet your needs.Please measure before purchase to make sure there is enough space for installation..
  • Installation location:choose a place with good and cold air through the oil cooler kit for installation.Instruction included..
  • Function:keep oil temperature low, help to improve the lubricating effect of engine oil, prevent parts damage ,or even seizure of the engine.Usable to cool down engine oil,transmission, and rear-differentials.Besides,this stacked-plate oil cooler design smaller and lightweight suitable for narrow space..
  • Size:10AN 30Row oil cooler,oil capacity:0.74L.Test pressure: 116psi,burst pressure:232psi.Material:aluminium alloy..
  • Package Include:1pc 30row engine oil cooler.2pcs 10an female to 8an male fittings,2pcs 10an female to 6an male fittings.Can be used to connect 8AN / 6AN braided fuel line hose ends..
Check Stock

Drive-up Golf Cart Ice Cooler Kit Caddy for Club Car Precedent Tempo and Onward 102588101 103886801

  • Fits Club Car Precedent,TEMPO and Onward..
  • High-Quality:Cooler fits and keeps things cold just fine.Note:Only suitable for 2-seater cars, not suitable for 2+2..
  • This one is mounted on the front cover. It's easy to put on or take off.It's not in the way of your golf clubs in the back..
  • Having this cooler means that you or your friends can have a refreshing drink anytime..
Check Stock

Transmission Torque Converter Oil Cooler Compatible with 2003-2009 Auto Heat Exchanger Base for Dodge Ram 2500 3500 Cummins Diesel 5.9L 6.7L Replaces OEM 68004317AA 5086946AA 5086946AB 4930582

  • TORQUE CONVERTER OIL COOLER - New replacement torque converter oil cooler for Cummins transmission torque converter cooler compatibility with....
  • HIGHLY PERFORMANCE - Replace a new oil cooler transmission can reduce the oil temperature, reduces oil consumption. Customers can find the....
  • FUNCTIONS - The transmission oil cooler is an essential component of every vehicle, helps the transmission stay cool, even when working harder than....
  • SYMPTOMS OF A FAILED TRANSMISSION OIL COOLER - The proper functioning of it is necessary for a healthy vehicle, and if it is worn, you could be in big....
  • KINDLY REMINDER - Kindly please refer to part number and fitment chart carefully before place order to avoid buying wrong. High quality OEM....
Check Stock

Engine Oil Cooler Kit - Compatible with Ford Trucks - Powerstroke 6.0L V8 F250, F-350, F450, F550 Super Duty, Excursion, E350, E-450 - Replaces Part 904-228, OCK388, 3C3Z 6A642 CA - Gasket Seal Kit

  • Replacement Engine Oil Cooler With Gasket Seals & O-Rings - Is a heat-exchanger which is commonly a radiator type of cooler which cools engine oil from the engine. It removes excess heat from the oil using the engine coolant that flows around as the engine oil passes through the cooler. The engine oil cooler can be located under the intake above the engine..
  • Compatible Replacement for Ford Vehicles - 2004 - 2005 E-350 Club Wagon | 2004 - 2010 E-350 Super Duty | 2004 - 2007 E-450 Super Duty | 2003 - 2005 Excursion | 2003 - 2007 F-250 Super Duty | 2003 - 2007 F-350 Super Duty | 2003 - 2007 F-450 Super Duty | 2003 - 2007 F-550 Super Duty |..
  • Replaces Part# 3C3Z 6A642 CA, 904228, 904-228, 015339, OCK388, 3C3Z-6A642-CA, 3C3Z6A642CA - If you are noticing engine oil in your coolant system, oil or coolant leaking from the oil cooler or engine coolant mixed with your engine oil then your oil cooler might need to be looked at or replaced. This engine oil cooler kit also includes viton gasket seals needed for the proper service on your vehicle..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement and it will fit and work exactly like the factory part. This part is commonly found on popular Powerstroke 6.0 V8 models....
Check Stock

Universal Turbo Turbocharger T3 T4 T04E A/R .50 A/R .63 V-band Oil 1.5-2.5L SCB

  • Exhaust (Downpipe) Flange: V-Band Flange.
  • Exhaust (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns.
  • Horse Power: Boost Horse Power up to 420HP.
Check Stock

Improved Racing EGM-500 LS Engine Oil Pump Pickup Tube Brace/Girdle

  • Machined from lightweight 6061-T6 aluminum, black anodized and laser-marked.
  • Distributes even clamping force around pickup tube flange by acting as an extension of the flange.
  • High-strength Class 10.9 M6 flange screws, zinc plated.
  • DOES NOT fit any LS oil pickup tube with welded flanges (GM Truck tube part # 12608593, Holley 302-1 and similar). DOES NOT fit pickup tubes with two screw holes on their flange (Holley 302-2 tube and similar)..
Check Stock

Transmission Cooler LPD47391 Trans Cooler 40,000 GVW Transmission Cooler Kit with Mounting Hardware Transmission Oil Cooler With Cooler Hose

  • 1.[ Transmission Cooler That Provides The Best Protection for Cars ]: When your vehicle needs an auxiliary transmission oil cooler, it can provide you with the best protection. The trans cooler can be used to cool the engine crankcase, clutch, valve assembly, etc. It is an essential tool for heavy-duty applications..
  • 2.[ Highly Compatible Trans Cooler ]: The transmission cooler kit is suitable for advanced cooling protection and traction applications of cars, vans, light trucks, R.V. below 40,000GVW..
  • 3.[ Part Number For Transmission Oil Cooler ]: LPD47391.
  • 4.[ Transmission Performance Oil Cooler Made of High-quality Materials ]: This transmission cooler is made of high-quality materials. The brazed aluminum structure is characterized by its high temperature resistance, corrosion resistance and long service life. The improved fin spacing is more precise, which can achieve efficient airflow and cooling..
  • 5.[ Transmission Cooler Kit With Complete Accessories ]: This kit includes transmission cooler, bolts, nuts, washers and steel mounting straps, brass fittings, high-quality cooler hoses and hose clamps..
Check Stock