Reviews Ohm Component Speakers

CT Sounds Meso 6.5” 320 Watt 2-Way Premium Component Car Speaker Set

  • Speaker Size: 6.5” 2-way component speaker set, Impedance per speaker: 4 Ohm, Power per set: 160W RMS | 320W MAX.
  • Custom engineered 6.5 inch component speakers built to bring you the highest tonal accuracy by providing a well-balanced of powerful mid-bass and....
  • Take your sound to the next level, the meso 6.5 inch component speakers can be turned up uncontrollably loud with no distortion.
  • Included 25mm silk-dome tweeters are suspended in ferrofluid with a N38H motor assembly to provide an accurate reproduction of your favorite tracks.
  • 2-Way Component Speaker Set Includes: (2) 6.5” Midrange Woofers, (2) 25mm Silk-Dome Tweeters, (2) 12 dB Passive Crossover Networks, Premium Wire for....
Check Stock

CT Sounds Meso 6.5” 500 Watt 3-Way Premium Component Car Speaker Set

  • Speaker size: 6.5” 3-way component speaker set, Impedance per speaker: 4 Ohm, Power per set: 250W RMS | 500W MAX.
  • If you want to play your music loud enough for the entire neighborhood here, the CT Sounds Meso 3-Way component speaker set will do just that, and then some.
  • Take your sound to the next level, the meso 6.5 inch component speakers can be turned up uncontrollably loud with no distortion.
  • Included 3.5” midrange speakers feature a neodymium motor assembly and will have your music heard from several blocks away.
  • Included 25mm silk-dome tweeters are housed in a brushed aluminum bracket to keep your ride looking sharp.
Check Stock

Rockville Commercial Restaurant Amp+(8) 5" White Ceiling Speakers+Wall Control

  • ...uetooth audio streaming. FM radio tuner. USB input to play audio stored on a thumb drive (32gb max). SD card slot to play music stored on an SD Card (32gb max).
  • Separate volume control for MIC1, MIC2, MP3, LINE1, LINE 2 input. Bass and Treble control. 5 segments signal level indication. Built in cooling system keeps component cool at all times. (2) Sets RCA AUX inputs. (2) Mic inputs. RCA REC output. 100V speaker red positive speaker output terminal. 70V speaker red positive speaker output terminal. 8 Ohm red positive speaker output terminal. Shared negative speaker output terminal. Specifications: Distortion:.
  • Signal to Noise Ratio: > 79dB. Power Requirements: 120V / 50-60Hz. A Weighted Signal to Noise (@ 1W) -79.0dBA. A Weighted Signal to Noise (referenced to full 4 ohm power) -95.1dBA. Frequency Response (bandwidth @ 2Vrms out, @ -3.0dB) 8 Ohms.
  • (8) RockvilIe CCL5T White 70V 5" Commercial Ceiling Speakers. Perfect for PA announcements or background music or any other applications where you want many speakers installed. Transformer with terminals for 5 Watts, 2.5 watts, or 1.25 watts. Double Paper Cone. 0.5 voice coil. 1.7 oz ferrite magnet. 5 Woofer. Fireproof screw terminal block. High Quality Spring Loaded Push Terminals. Paintable Flush Mou....
Check Stock

KICKER 46CSS684 6x8 450w Car Audio Component Speakers+2 CSC68 Coaxial Speakers

  • Package Includes: (1) Kicker 46CSS684 6X8" 9450w Car Audio Component Speakers w/ 0.75" Tweeters CSS68, (1) Pair of Kicker 46CSC684 CSC68 6"x8" 6x8 450 Watt 4-Ohm Car Coaxial Speakers CSC684.
  • Features of 46CSS684: KICKER 46CSS684 6X8" 9450w Car Audio Component Speakers w/ 0.75" Tweeters CSS68, Fits nearly every car made, 12dB crossovers with a smaller footprint for easier installation, Three-position tweeter switch for dialing in your highs, EVC (Extended Voice Coil) technology help deliver remarkable bass response, Titanium tweeter construction and neodymium magnets to reveal subtle details, Sunlight-treated poly-foam surround assists with precise linear excursion.
  • Phase plugs in the woofer cones eliminate any distortion, Steel mesh grilles protect your drivers, Three tweeter mounting options including flush, angled and surface pods, Dimension (L x W x H): 12.375 inch x 12 inch x 3.25 inch, Weight: 6 lbs.
  • Features of 46CSC684: Pair KICKER 46CSC684 CSC68 6"x8" 6x8 450 Watt 4-Ohm Car Coaxial Speakers CSC684, Fits nearly every car made, Zero-protrusion tweeters to fit nearly any factory depth, Woofer EVC (Extended Voice Coil) tech assists with precise linear excursion, sunlight-treated poly-foam surround resists heat or direct sunlight.
Check Stock

Massive Audio FC6.3 – 6 Inch / 6.5 Inch 3-Way, 150w/300 Watts Max, 6.5 Inch Mid-Bass, 3 Inch Mid-Range, 25mm Tweeter, 4 Ohm, 12db X-Over, Component Kit Speakers. Pair

  • HIGH QUALITY CAR AUDIO SPEAKERS | Looking for high end car audio speakers that will not break the bank? Our high performance component speakers are some of the very best replacements for your factory or aftermarket speakers! These high fidelity speakers have a mounting depth of only 2.4 Inch and churn out high end sound quality with its 6.5 Inch + 3 Inch Drivers. High-Energy Y30 Magnets assures the sufficient magnet force needed for high sensitivity and accurate sound reproduction..
  • SOLD AS A KIT | GREAT SOUND QUALITY | These Car Audio Speakers outperform most aftermarket component speakers period! These great sounding 6.5 inch Component speakers Feature: 150 Watts RMS / 600 Watts MAX / @ 4 Ohm, 93dB, 50Hz - 20KHz, Fully Isolated Tinsel Leads to Eliminate Crosstalk, High Quality Cloth Spider With Polyester Fiber, and 25mm Silk Diaphragm Tweeter With Ferro Fluid..
  • GUARANTEED TO LAST | Are you frustrated with factory car door speakers that crack, snap and pop or even blow out over time? These heavy duty, high end car audio speakers are guaranteed to last! Built with Custom External 12dB Linkwitz–Riley Crossovers and Custom Designed Pole Piece for Low Distortion and ....
Check Stock

Rockville Commercial Restaurant Bluetooth Amplifier+(6) 3.5' Black Cube Speakers

  • ...uetooth audio streaming. FM radio tuner. USB input to play audio stored on a thumb drive (32gb max). SD card slot to play music stored on an SD Card (32gb max).
  • Separate volume control for MIC1, MIC2, MP3, LINE1, LINE 2 input. Bass and Treble control. 5 segments signal level indication. Built in cooling system keeps component cool at all times. Inputs and Outputs: (2) Sets RCA AUX inputs. (2) Mic inputs. RCA REC output. 100V speaker red positive speaker output terminal. 70V speaker red positive speaker output terminal. 8 Ohm red positive speaker output terminal. Shared negative speaker output terminal. Specifications: Distortion: 79dB. Power Requirements: 120V / 50-60Hz. A Weighted Signal to Noise (@ 1W) -79.0dBA. A Weighted Signal to Noise (referenced to full 4 ohm power) -95.1dBA. Frequency Response (bandwidth @ 2Vrms out, @ -3.0dB) 8 Ohms .
  • (2) mounting brackets with metal bars. (2) safety cables. (8) screws. (1) User manual. Cube by RockvilIe - Pair of Black 3.5 70 Volt Commercial Speakers With Swivel Mounting Bracket. 70 V....
Check Stock

Rockford Fosgate PM300X2 Punch Marine 300 Watt 2-Channel Amplifier

  • The PM300X2 marine grade 2-channel amplifier (2.4" x 7.8" x 9.90") packs a Punch to deliver high output for those demanding stereo applications with 300 Watts of RMS power.
  • Versatile design can be used in either 1 or 2 channel configurations (RMS Power Output: 100 Watts x 2 @ 4-Ohm or 150 Watts x 2 @ 2-Ohm or 300 Watts x 1 @ 4-Ohm Bridged).
  • Compact design with high dynamic power using Class-a/b technology, its perfect to drive a pair of coaxial speakers, component speakers, or a single subwoofer in your marine and motorsports vehicles.
  • High level input capable with Auto Turn-On circuit, On-board Punch EQ with +18dB boost @ 45Hz and 12dB/octave Butterworth crossover make the PM300X2 a serious power house.
  • Famous Rockford Fosgate build quality insures that the PM300X2 will handle everything you throw at it! Full 2-year parts and labor warranty when purchased from an authorized Rockford Fosgate reseller.
Check Stock

JVC KS-AX204 AX2 Series 600 Watt Class AB 4-Channel Car Stereo Amplifier Low Profile

  • GENERAL FEATURES: AX2 Series compact 600 Watt max power 2-chanel car amplifier for single subwoofer or set of coaxial or component speakers.
  • SOLID SOUND QUALITY: 3-way protection circuitry with Bass Boost (off-low-high).
  • EASY INSTALLATION: RCA level and Harness level inputs with easy to fit 7-15/16" x 2" x 7-3/8" form factor.
  • SPECS: RMS Power 40w x 2 (4 ohm), 60w x 2 (2 ohm), 120w x 1 (Bridged 4 ohm) 2-8-ohm load impedance, 80 dB Sound Pressure Level, 8 gauge.
  • OTHER FEATURES: Wired Bass Boost level control for precise sound adjustment.
Check Stock

Fielect 4Pcs DIY Magnetic Speaker 1W 8 Ohm 57mm Diameter Round Shape Replacement Loudspeaker

  • 【Feature】- The 1W speaker component has Unique design, adopted well-performed magnet, imported rubber coil..
  • 【Advantages】- This 8ohm speaker is a high quality speaker as a replacement for your sound system, and high sensitivity, loud voice, good and clear sound quality. Adequate volume, it will be your best choice if you have a good application..
  • 【Application】- Small magnet speaker will be your best choice in DIY speakers and It will work well for home audio-visual equipment and other speakers, it will be your best choice if you have an ideal application..
  • 【Package Contents】- 4Pcs X Magnet Speaker.
Check Stock

Rockville Pair RV68.2C 6×8 / 5×7 Component Speakers+6×8 Coaxial 3-Way Speakers

  • Package Includes: (1) Pair of RockvilIe RV68.2C 6×8 / 5×7 Component Car Speakers 900 Watts/170w RMS CEA. (1) Pair of RockvilIe RV68.3A 6×8″ 3-Way Car Speakers 900 Watts/170 Watts RMS CEA Rated. Includes: (2) 6×8 speakers. (2) tweeters. (2) Crossovers. (2) Grills. Flush and surface Mounting accessories. Speaker wire. Features: RockvilIe RV68.2C 6×8 and 5×7 Component car speakers (pair). Peak Power Rating: 900 Watts per Pair / 450 Watts Each.
  • CEA Compliant RMS Rating: 170 Watts per Pair / 85 Watts Each. Injection Molded Polypropylene woofer cone gives amazing bass and mids. Flex Motion Butyl Rubber Surround. 1.2 PEI dome tweeter with ferrite magnet give amazing highs. Flush and surface mounting tweeter options. Fine-tuned 2-Way Crossover, 12db/Octave Roll Off. Ferro Fluid Cooled Tweeter Magnet. Steel high quality basket. Rubber magnet boot cover. Frequency response: 32-22,000 Hz.
  • Crossover will cut anything lower than 3.5 Khz @ 12 dB / octave slope from the tweeters. Crossover will cut anything higher than 3.5 Khz @ 12 dB / octave slope from the woofers. Sensitivity: 91 dB @ 1w/1m. Mount depth: 2.52″. Impedance: 4 Ohm. Grilles included. Aluminum voice coils. 100% oxygen free copper voice coil windings. Black electro-plated T-yoke and washers. C....
Check Stock