Reviews Ofna Motor Mount

TAMIYA Polishing Compound Fine and Finish SET

  • This item works with: Associated Apex Touring V-Type, RC-12R5.x, TC-3 Nitro Sedan.
  • HPI Electric E10, Sprint 2, Sprint 2 Flux.
  • Kawada Sigma 2 1:10 touring, Sigma DC 1:10 Drift.
  • Kyosho Fazer GP 1/10, GT Inferno Sedan, Spider MK2, TF2 Spider EP.
  • Mugen MTX-3 1:10 Nitro Touring, MTX4R 1:10 Nitro Touring.
  • RJ Speed Digger, Legends, Nitro Dragster, Nitro Funny Car.
  • Tamiya TA01, TA01 FF, TA02, TA02W, TA03, TA04, TA05, TL01.
Check Stock

Codinter Kayak Motor Mount, Trolling Motor Mount Kit for Sit-On-Top Fishing Kayak Scupper Holes/Kayak Mount Tracks

  • 【Two Install Scenes】 This kayak motor mount works with kayak scupper holes and parallel kayak mount tracks, such as sit-on-top kayaks and fishing kayaks, not for declining flush mount fishing rod holders in the kayak.
  • 【No Drilling Requires】 Installing this kayak trolling motor mount kit does not have to drill into your kayak hull, It’s easy to install just simply plug into the scupper holes or mount it on the track, it’s stable and tightened by the supplied ratchet strap.
  • 【Quality Materials】 The materials used to make this kayak motor mount bracket include anodized aluminum, UV stabilized reinforced plastics, and stainless steel fasteners, this kit is extremely durable and built to last for fresh or saltwater use.
  • 【Heavy Duty】 The mounts are designed to fit into kayak scupper holes / tracks that range from 3.54”-31.5” in width, the diameter of the poles is 1 inch. It can be rated to hold up to 66lb (30kgs) thrust trolling motors.
  • 【Motor Mount】 Suitable for mounting electric and petrol trolling motors either right or left hand side.
Check Stock

Solstice Motor Mount for Voyager and Outdoorsman Inflatable Boats

  • VERSATILE CONSTRUCTION: This motor mount assembly is compatible with Solstice Voyager & Outdoorsman inflatable boats (Model #s 30400 30401 30800 31400 31600).
  • MOTOR STRENGTH: The Solstice motor mount can accommodate electric or gas motors rated up to 2.5HP.
  • QUICK INSTALLATION: Simple design makes assembly and installation quick and easy so you can focus on time on the water.
  • HEAVY DUTY CONSTRUCTION: Stainless steel mounting hardware couples with heavy-duty ABS transom plate make for a durable motor mount built to last.
Check Stock

Cen-Tec Systems 97470 Quick Click Dust Collection Separator, Translucent

  • Motor Size: The wall mount dust collector features with 3 horsepower motor voltages of 110V, single phase, 3450RPM.
  • Air Flow: With 2800 CFM air flow, this portable dust collector is more effective than many big stationary units.
  • Bag Filtration: The wall mount dust collector includes 5-micron bag with built-in window to view dust level, featuring the impeller of 12" balanced steel radial.
  • Wall Mounting: The wall mount dust collector features with wall mounting or ground position to fit your job needs.
  • Continuous Use: Fan Cooler motor is designed for long, continuous use of the wall mount dust collector.
Check Stock

Supershop® Intex 68325EP Excursion 5 Inflatable 5 Person Rafting and Fishing Boat with 2 Aluminum Oars, Air Pump and Motor Mount Kit for Mild Rivers and Lakes

  • INFLATABLE BOAT WITH MOTOR MOUNT: The Intex Excursion 5 inflatable boat is suitable for up to 5 adults and has a 1300 pound capacity making it great for boating or fishing with friends down a mild river or on the lake.
  • Includes a motor mount kit that fits up to a 3.5 horsepower motor (not included).
  • FEATURES: 2 inflatable seats with backrests are included for comfort and seating stability provides superior back support for boating and fishing.
  • Fishing and relaxing have never been easier with the 4 built-in fishing rod holders and gear pouch.
  • MOUNTING:  Fittings for a motor mount are included for the flexibility of adding a trolling motor (motor and motor mount sold separately) with 2 grab handles on each bow and an all-around grab line are provided for your convenience, as well as welded on oar locks and oar holders.
  • BOAT DESIGN: Designed with heavy-duty, puncture-resistant PVC for comfort and durability, and an inflatable I-beam floor for rigidity.
  • 3 air chambers including an inner auxiliary chamber inside the main hull for extra buoyancy and safety.
Check Stock

Bonuci 2 Pieces Surf Hat Surf Bucket Hat Surfing Accessories Sun Protection Surfing Cap with Chin Strap for Men Women Water Sports Kayaking Fishing Boating, Black and Gray

  • INFLATABLE BOAT WITH MOTOR MOUNT: The Intex Excursion 5 inflatable boat is suitable for up to 5 adults and has a 1300 pound capacity making it great for boating or fishing with friends down a mild river or on the lake.
  • Includes a motor mount kit that fits up to a 3.5 horsepower motor (not included).
  • FEATURES: 2 inflatable seats with backrests are included for comfort and seating stability provides superior back support for boating and fishing.
  • Fishing and relaxing have never been easier with the 4 built-in fishing rod holders and gear pouch.
  • MOUNTING:  Fittings for a motor mount are included for the flexibility of adding a trolling motor (motor and motor mount sold separately) with 2 grab handles on each bow and an all-around grab line are provided for your convenience, as well as welded on oar locks and oar holders.
  • BOAT DESIGN: Designed with heavy-duty, puncture-resistant PVC for comfort and durability, and an inflatable I-beam floor for rigidity.
  • 3 air chambers including an inner auxiliary chamber inside the main hull for extra buoyancy and safety.
Check Stock

Newport NK180 Kayak Trolling Motor w/ Mounting & Steering Bracket Kit 1.8hp Equivalent Brushless Motor Compatible w/ 24V Lithium, AGM, or Lead Acid Deep Cycle Batteries (Battery Not Included)

  • 24V Brushless Motor: The 1.8hp equivalent Direct Drive motor provides quiet and efficient power delivery without the use of internal gears, powering you along at up to 5 knots!..
  • Aluminum Motor Mount: The 4 bolt motor mount attaches directly to PowerPole ready fishing kayaks, and can be installed on other kayaks using a drill,..
  • Battery Options: The motor can be used with lead acid deep cycle or lithium deep cycle batteries with a nominal output voltage between 24V & 29V. Note: Some lithium batteries output higher than the rated voltage, choose wisely,..
  • Included in Box: Motor, Speed Controller, Emergency Stop Key, Motor Mount w/ quick release, 5ft Battery Cable Kit, Steering Triangle, Height Adjustment Collar, Motor Lift Arm, Steering Cables, 4x Nylon Cords, Raise/Lower & Reverse Lock Handles, Installation Hardware, Owners Manual..
  • Why Choose Newport? Newport has been serving the marine industry since 2009. We stand behind every product we sell with a 2 year warranty, and a customer service team you can actually talk to..
Check Stock

Bullnose Rudder clamp on boat rudder fits a 1.125\ transom trolling motor shaft. Commonly used for, inflatable Pontoon, Pelican Bass Raider 10E, fishing Kayak, Canoe, Jon boat, etc. USA Manufactured

  • PERFECT SOLUTION - Trolling motors are known for lack of steering especially when the wind picks up, the water is choppy or you want to track in a straight line. Simply add a Bullnose Rudder which is designed to give you better control of your watercraft in most windy conditions, help hold a true course at most trolling speeds, and prevent the boat from spinning as much when the motor is off. Patent no. D712,341S.
  • FIT - The Bullnose Rudder is a boat rudder that fits a 1 1/8" (1.125") transom trolling motor shaft. Please note, it will NOT work on a self deploy bow mount trolling motor. It measures 10.5" high x 4.75" wide and fits a 1 1/8" shaft diameter. It's most commonly used for "but not limited to" minn kota trolling motor, motorguide trolling motors, newport vessel trolling motor, etc. Common tiny boats used are, inflatable pontoon, Pelican Bass Raider 10E, fishing kayak, canoes, jon boats, and more..
  • ESSENTIAL - In most cases it helps hold a true course at both a slow and high trolling speeds. Customers have also said, “it prevents the boat from spinning as much when the motor is off”. Most tiny boats will benefit from having some kind of a rudder set up in the back vs not having a rudder at all. Only takes a few minutes to install a....
Check Stock

Mophorn 3HP Dust Collector with 2800 CFM Air Flow Bag Dust Collector 110V Portable Dust Collector 5 Micron Bag Filtration

  • Motor Size: The wall mount dust collector features with 3 horsepower motor voltages of 110V, single phase, 3450RPM.
  • Air Flow: With 2800 CFM air flow, this portable dust collector is more effective than many big stationary units.
  • Bag Filtration: The wall mount dust collector includes 5-micron bag with built-in window to view dust level, featuring the impeller of 12" balanced steel radial.
  • Wall Mounting: The wall mount dust collector features with wall mounting or ground position to fit your job needs.
  • Continuous Use: Fan Cooler motor is designed for long, continuous use of the wall mount dust collector.
Check Stock

Trolling Motor Accessories, Haoguo Paddle Boat Parts, Boat Rudder Fits Most 24-55 Thrust Trolling Motors, Great for Pontoon, Fishing Kayak, Canoe, Jon Boat

  • ...ble to extend the service life and allowing you to focus more on fishing.
  • MORE CONTROL – Turns easily when steering and provides better control in wind and most weather conditions, decreasing the need for oars, it does help to keep your boat on course in the wind, and prevent the boat from spining as much when the motor is off.
  • UNIVERSAL MOUNT – Compatible with most electric trolling motors (24 to 55 thrust). Ideal for use as a canoe rudder, or a inflatable pontoon rudder, kayak rudder, or pelican bass raider 10E rudder. Please note, it will NOT work on a self deploy bow mount trolling motor.
  • EASY INSTALLATION – Complimentary socket wrench for easy installation, it takes only a few minutes to attach the rudder to the shaft of your small watercraft motor and can be mounted in an upright position on the front or back of the shaft. You may even mount it with the short end down (upside down) for shorter motors. A universal design for your needs.
  • BOW MOUNT – Fits the EDGE, Minn Kota, MAXXUM, and FORTREX. The bow mount motor must be a hand cable pull, NOT self deploy. Your bow mount setup needs to have 1ft shaft protruding from the end of the platform allowing enough room to attach the rudder.
Check Stock