Reviews Obd Saver

E-Z-GO Part Number 73138G02 Tow Switch Harness

  • Use the OBD2 Memory Saver Cable to keep all settings in your vehicle while changing its battery.
  • 3-ft cable works with your pocket-sized MICRO-START power supply to keep your vehicle settings.
  • Never again lug around a big, heavy, bulky jumpstarter to keep power to your vehicle's OBD port.
  • Just plug the OBD-II Memory Saver directly into MICRO-START's 12V DC port for power to keep settings.
  • Must-have accessory for Mechanics and home Mechanics. Compatible with XP-10-HD, XP-10, XP-1.
Check Stock

VSTM OBD II Vehicle ECU Emergency Power Supply Cable Memory Saver (3Meter) with Alligator Clip-On 12V Car Battery Cigarette Lighter Power Extension Socket

  • Compared by most of OBD metal pins in market with zinc plating, ours are gold plating. Better reliable on contact and electric transmission. Compared by most of OBD II Memory Saver (or Automotive Computer Memory Saver) in market with 3 ~ 5 ft in cable length, ours with super long 10 ft (3meters) cable. In this way, you can change your car battery, also by get the alternative 12V power source from another car, when you not have a jump starter on hand.
  • 8 amp fuse built into the memory saver, better reliable on overload protection. Powered by any jump starter with a 12V outlet into an OBD II Memory Saver. Interface connector between a 12V DC power source and vehicle's OBD II port. Preserves vehicle codes and electronic presets. Replacing a car battery on older vehicles used to be simple!! You unhook the old battery and install the new one..
  • Late-model vehicles, however, rely on computers that operate everything from the stereo to the transmission. If power is lost to the computer, the settings are lost and have to reset to default. That means the vehicle may feel different when driven, and you may have to enter a security code to access the stereo..
  • Using this simple memory saving device when replacing your car battery will help you avoid these problems. T....
Check Stock

allsun Car Memory Data Saver OBD2 Automotive Emergency Power Supply Battery Adapter Protection Connector Memory Saver Adapter Cable Keep Memory Alive for Cars 2 Alligator Clips Cigarette Lighter

  • Car Memory Saver OBD2, has red clip link back-up battery positive, negative black negative.Prevents electronic memory loss when disconnecting a vehicle's battery preserves vehicle codes and electronic presets..
  • Car Memory Keeper, Alligator clip car charger, you can use this Car Data Saver to keep your car's computer powered through the OBD-II port or the cigarette lighter socket on the car while you replace the car's storage battery. The Car Data Saver needs an additional 12V storage battery as a temporary power source. It is a very useful tool for car service..
  • Memory Saver Automotive, the Emergency Power Interface with super long 6.5 ft (2meters) cable. In this way, you can change your car battery, also by get the alternative 12V power source from another car, when you not have a jump starter on hand..
  • Memory Saver Adapter Cable,as our device with 2 meter cable, it will be a convenient way, should you not have jump starter (or Lead-acid battery) on hand, and the device can also get the 12v power supply from cigarette lighter of another good car. Just insert the Cigarette lighter plug to this car and insert into 16 pin plug to the OBD port of the car you want to replace battery. And now you can replace the battery..
Check Stock

OLLGEN 3M/10ft OBD II Vehicle ECU Emergency Power Supply Cable Memory Saver with Alligator Clip-On 12V Car Battery Cigarette Lighter Power Socket Extension Cable

  • Cigarette Lighter with Alligator to OBD2 16 Pin Male Connector Power Cable :Powered by any jump starter with a 12V outlet into an OBD II Memory Saver.Plug it into the OBD Male connector of the vehicle, plugging the cigarette connector into the clip cords, hooking it up to a 12V battery source.Note:This device can work with any 12V DC power source, including jump starter, DC 12V Lead-acid battery, or another car’s DC 12V power outlet..
  • Super Long 10ft (3meters) Cable: plenty long until you try connecting it to another car's battery or cigarette lighter. In this way, you can change your car battery, also by get the alternative 12V power source from another car, when you not have a jump starter on hand..
  • 8 amp fuse built into the memory saver, better reliable on overload protection. Powered by any jump starter with a 12V outlet into an OBD II Memory Saver. Interface connector between a 12V DC power source and vehicle's OBD II port. Preserves vehicle codes and electronic presets. Replacing a car battery on older vehicles used to be simple!! You unhook the old battery and install the new one..
  • Work no problem as all ODBII ports :It works on any vehicle with OBDII which is 1996 and later (You will be plugging one end into it). It is not needed or required t....
Check Stock

OBD2 Male to Cigarette Lighter Memory Saver Adapter Cable Car OBDII Emergency Power Supply Cable

  • This cable has reverse-connection protection . It is used to charge your car electric system via this cable to preserve the vechile codes and save all information in memory when you need to change the battery .But you can not get power reversely from the car electric system via this cable ..
  • OBD2 16pin to cigar lighter male ,and compatible with all obd ii memory saver.
  • Thick cable 18awg gauge , and length 10ft/3m.
  • Reverse connection protection and 8 amp fuse in-built. This obd2 male connector can work with both 12v and 24v obd2 female port ..
  • Connect the obd2 male connetor to the car you want to replace the battery for . The cigaretter lighter connector will be connect to a battery power charger or a good car which is starting ..
Check Stock

OBD II Vehicle ECU Emergency Power Supply Cable Memory Saver

  • ...rt. The device will start beeping. Last,replace the vehicle battery then unplug the device from the OBD II port..
  • 【Not worry】 We provide perfect after-sales service. If you have any questions during the use, you can leave the question on this page or send an email to us. We will give you a perfect solution. Saver Cable has a one-year warranty..
Check Stock

vgate OBD II Memory Saver Connector with Two 2 Alligator Clips

  • 【Avoid Information Loss】- Prevents electronic memory loss when disconnecting a vehicle's battery. Keep the car computer memory dashboard information, acoustics, memory seats, digital clock etc. Preserves vehicle codes and electronic presets..
  • 【Design】- Red clip link back-up battery positive, negative black negative. Interface connector between a 12V DC power source and vehicle's OBD2 port..
  • 【Easy to Use】Plug and play, Vgate ECU Memory Saver can work with any 12V DC power source, including jump starter, DC 12V Lead-acid battery, or another car's DC 12V power outlet..
  • 【Safety & Protective】- 8 amp fuse built Into the memory saver, better reliable on overload protection..
  • 【Good Quality】- The use of environmentally friendly high-quality materials, no odor non-toxic ingredients, tough and soft wear resistance, not winding, environmental protection and durability..
Check Stock

SOLAR ESA30 OBD II Memory Saver Connector

  • Turns any jump starter with a 12v power port into a memory saver.
  • Interface connector between a jump starter and a vehicle's OBD II port.
  • Prevents electronic memory loss when disconnecting a vehicle's battery.
  • LED confirms a proper connection has been made to the OBDII port.
Check Stock

Car Fuel Saver, Fits for Most Models, Saves About 15% Fuel (1 PCS)

  • ⭐️【Economic】Oil prices are getting higher and higher, using fuel-saving treasures can effectively reduce driving costs..
  • ⭐️【How to Use】Plug EcoOBD2 into OBD2 connector of your car. And turn the ignition on for 30 seconds. And Turn the engine on..
  • ⭐️【Widely Suitable】This Car Fuel Saver fits most models of car..
  • ⭐️【ECO Friendly】Low emissions to the economy..
  • ⭐️【Easy to Use】 It is very easy to use..
Check Stock

OBD2 to OBD1 GM Adapter, OBD1 12 Pins to OBD2 16 Pins Scanner Diagnostic Tool OBD II Adapter Cable Connector for GM (1pc OBD2 to OBD1 GM Adapter)

  • 【Obd1 Scanner】You will get the 1pc obd1 to obd2 adapter, which is a GM 12 pin to OBD2 16Pin connector for car..
  • 【Obd1 to Obd2 Adapter】OBD1 12 Pins to OBD2 16 Pins cable is a fault diagnosis tool cable with high utility for connecting scanners and vehicles..
  • 【Obd2 Scanner】The OBD1 adapter cable is made of high quality metal and plastic materials, which are environmentally friendly and will keep you going for a long time..
  • 【GM 12 Pins Male Connector】OBD1 Adapter Cable Easy To use, 2 Pins To 16 Pins OBD Cable allows you to connect your GM with OBD1 12 pins socket with your existing 16 pins OBD2 tool..
  • 【OBDII 16Pins Female Connector】OBD2 to OBD1 GM Adapter is manufactured in accordance with the original specifications, in line with strict quality control standards, you can rest assured to use..
Check Stock