Reviews Nylon Probe Tool

Power Probe ECT3000B ECT 3000 Box

  • 【Overload Protection for Longer Life】Auto circuit breaker protect the tool from overload through the inner circuit breaker to enables product last....
  • 【4 Adjustable Modes probe tester】AC detects the maximum and minimum voltage, supply frequency and duty cycle of the circuit under test.
  • 【Easy to Operate】Power probe built-in head light allow you to work in the dark area, there will be beep tone when detecting,operate the tool....
  • 【WIDE Vehicles Application】 Power probe tester can support 6-30V cars, boats, trailers, ATV, motor homes and many other vehicles. With the ability....
  • 【3-YEAR WARRANTY Circuit Tester】 For damages caused by non-human factors, AUTOOL promise to resend power probe circuit tester parts for free....
Check Stock

Lot of 50 Menda Nylon Soldering Probe Spudger iPhone and Small Electronics Non-Mar Pry Repair Tool

  • Non-mar nylon finish will not mar delicate surfaces, Ideal material for use in ESD protected areas, also non conductive.
  • Temperature resistant - material will not melt - excellent solder tool.
  • Pencil/Probe tip spudger tapered to a point on one end and screwdriver tip on the other.
  • Wiring tool used for poking or adjusting small wires or components in electronics/telecom.
  • Made in the United States of America by Menda (35622).
Check Stock

YIYIBYUS Precision Two-Dimensional Measuring Ruler General Automobile Body Frame 2D Measurement Maintenance Tool Measurement System is Easy to Operate

  • ... testing and measurement in accident vehicle maintenance. It can also be widely used in construction, mechanical maintenance and other fields. It is an aluminum telescopic measuring device..
  • 【NOTE】Do not touch heavy objects. Do not touch corrosive substances such as fire, rubber water, asphalt, etc. The magnetic probe of the digital calipers is tilted after use. Do not pull it out vertically to avoid injury..
  • 【MEASUREMENT TOOL KIT】Includes 20-150mm scale, 20-340mm scale, threaded probe, magnetic probe, magnetic probe and extended base, 3D adapter, large positioning probe, longitudinal positioning probe, small positioning probe, size nut probe, English manual..
Check Stock

Goupchn 500Mhz Oscilloscope Clip Probe 10x P6500B High Precision with Adjust Tool Accessory Kit

  • Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use..
  • P6500B probe is a 500MHz oscilloscope probe with a switch for 10x attenuation. It is a good oscilloscope accessory and suitable for BNC interface oscilloscopes..
  • Probe can be used in professional test equipment. It has a 1.3m cable with standard BNC end. It has stable performance and provides several accessories. Adjustment tool can adjust compensation capacitance to match oscilloscopes. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation..
  • Package include: 1 x probe, 8 x marker rings, 1 x ground wire, 1 x retractable hook tip, 1 x adjustment tool, 1 x ground spring, 1 x BNC adapter..
  • Warranty: Hope you can be satisfied with our oscilloscope probes. We provide guarantee of a 30-day replacement or refund for any problem and 1 year warranty. If you have any question, feel free to contact us..
Check Stock

Quantity Lot Menda 35621 Fiberglass Filled Super Tough 5-1/2" Heavy Duty Nylon Soldering Tool/Probe Made in the USA (1)

  • Nylon finish will not mar delicate surfaces, excellent tool for small electronics repair and automobile dashes and trim.
  • Ideal for opening plastic cases such as MP3 players, smartphones, laptops and more. Also a great tool for popping out batteries.
  • Anti-static, can be used in ESD protected areas, heat resistant for soldering, strong for prying.
  • Spudger pencil probe tip tapered to a point for poking on one end and a flat screwdriver pry tip on the other.
  • Made in the United States of America by Menda, warranty from SpudgerToolCom.
Check Stock

RTD Temperature Probe Sensor Replacement for Traeger Digital Thermostat Traeger Pellet Grills Grill Oven

  • > Compatible with all Traeger Wood Pellet Grills (EXCEPT PTG) with digital control meat probe capability, please check spade connector style before....
  • > Strict quality control standards to Build and test. Not OEM but quality exceeds OEM requirements. Easily spliced to thermostat leads, no tool....
  • > 37"(18cm) Internal Grill Sensor Probe, 47"(120cm) Heat Woven Wires. Screw and nut are not included, extra thin probe tip leaves a smaller puncture....
  • To monitor the meat temperature or ambient temperature (smoker/grill), This probe works very well on smokers....
  • > Guarantee and Service: The probe sensor Replacement Part completed with a One-year Warranty. Save much money off dealer prices. If the probe once....
Check Stock

Quantity Lot of Quality Menda Fiberglass Filled Super Tough 5-1/2" Heavy Duty Nylon Soldering Tool/Probe Made in the USA Wholesale (5)

  • Nylon finish will not mar delicate surfaces, excellent tool for small electronics repair and automobile dashes and trim.
  • Ideal for opening plastic cases such as MP3 players, smartphones, laptops and more. Also a great tool for popping out batteries.
  • Anti-static, can be used in ESD protected areas, heat resistant for soldering, strong for prying.
  • Spudger pencil probe tip tapered to a point for poking on one end and a flat screwdriver pry tip on the other.
  • Made in the United States of America by Menda, warranty from SpudgerToolCom.
Check Stock

200Mhz Oscilloscope Probe Clip Scope Test BNC End Probe P2200 10X/1X Black with Adjust Tool Kits

  • BNC END CABLE: This oscilloscope probe is good oscilloscope accessories, has a cable with standard BNC end, suitable for BNC interface oscilloscope..
  • ADJUSTMENT TOOL: There is a adjustment tool that can adjust compensation capacitance to match oscilloscope..
  • 1x /10x : This probe is 200MHz oscilloscope probes with a switch for either 1x or 10x attenuation, can meet your different needs..
  • DISTINGUISHED BY COLOR : There are marking circles in different colors help to identify different channels, you can tell the channel quickly and easily..
  • STABLE: This probe has stable performance, providing several accessories ,suit for professional testing..
Check Stock

Armada Technologies Pro48K Multi-Function Irrigation Test Kit with Tone Probe and Case

  • 【Overload Protection for Longer Life】Auto circuit breaker protect the tool from overload through the inner circuit breaker to enables product last longer and durable..
  • 【4 Adjustable Modes probe tester】AC detects the maximum and minimum voltage, supply frequency and duty cycle of the circuit under test.
  • DC detects the voltage value of the circuit under test.
  • In addition,the circuit tester can also detects the resistance between the circuit probe under test and the auxiliary ground.
  • Diode Test can quickly test the operation of the diode assembly and determines if it is conducting..
  • 【Easy to Operate】Power probe built-in head light allow you to work in the dark area, there will be beep tone when detecting,operate the tool without looking at the menu once you are familiar with the tone.Provide 4.9ft of electrical wire for easy use..
  • 【WIDE Vehicles Application】 Power probe tester can support 6-30V cars, boats, trailers, ATV, motor homes and many other vehicles. With the ability to power components such as radiator fans, starter motors, relays, window regulators, windshield wipers, etc. Powered by the car battery or cigarette lighter, no extra battery or cable required.
  • 【3-YEAR WARRANTY Circuit Tester】 For damages caused by non-human factors....
Check Stock

2 Pieces CNC Router Z-Axis Tool Setting Touch Plate CNC Touch Plate Probe Block Router Probe Milling Tool for Milling DIY Engraving Machine Probe

  • Package includes: you will receive 2 pieces of CNC router Z-Axis tool touch probes, which are equipped with high precision, smooths surface, and....
  • Size parameters: the size of this setting touch plate probe measures approx. 40 x 10 mm, and the length of cable measures approx. 1.2 cm, which can....
  • Reliable material: this CNC router Z-Axis tool is made of quality alloy material, strong and durable, and the bottom is insulated, waterproof and....
  • Easy to use: this Z-Axis router tool setting touch probe has the characteristics of high accuracy, smooth surface and exquisite design, and it is easy....
  • Wide range of application: this setting touch plate probe is suitable for processing most materials, such as woodworking, aluminum, acrylic, plastic,....
Check Stock