Reviews Nylon Hammer Drive Anchor

Nylon Hammer Drive Pin Nail in Masonry Concrete Anchors Zinc Nail 1/4 x 1 Qty 100

1/4 inch Diameter Nylon Mushroom Head Nail In Masonry Anchors with Zinc Plated Steel Nails.
Using a pre-drilled hole, they are installed with hand tools (typically a hammer).
Drive the pin into the anchor body, expanding the anchor, to form a tight fit.
Rust resistant nylon and zinc plated nail.
Designed for light duty masonry applications.

... your life, save your more time and energy..
【1000 Lbs Hold Strength】This 6 piece anchoring system has superior hold strength and will not come out of the ground when installed at full depth (30"), Holding power for each anchor will be up to 1000 lbs when installed at full depth.
【Easy to Use】You will need a hammer and a 0.5inch diameter drive steel tool to drive the anchor into the ground with no holes, no concrete, and no digging required. Remove the drive tool and pull up on the cable to set the toggle. The upward pull rotates the earth anchor into a perpendicular lock position allowing it to firmly secure your item to the ground. Note: drive steel tool is not included..
【Widely Application】This easy hook anchor staking system is a convenient and strong method for secure and prevent the theft or unwanted movement of outdoor items, such as greenhouses, shelters, gazebos, picnic tables, benches, BBQ grills, garbage cans, bicycles, swing sets, fountains, newly planted trees, construction equipment. and more to a variety of surfaces including grass, rocky soil, gravel and asphalt..
【Heavy Duty Material】Earth Anchor works like a toggle bolt in the soil to secure many items to the ground that are prone to theft or being moved. Constructed w....

Nylon mushroom head drive nail-in pin for anchoring and redundant fastening in concrete, block, brick or stone..
Anchor Diameter: 3/16". Anchor Length: 1-1/2"..
Nail Material: Steel. Anchor Body Material: Nylon..
Please see all available products by PHAT SATELLITE INTL.

Nylon mushroom head drive nail-in pin for anchoring and redundant fastening in concrete, block, brick or stone..
Anchor Diameter: 3/16". Anchor Length: 1-1/2"..
Nail Material: Steel. Anchor Body Material: Nylon..
Please see all available products by PHAT SATELLITE INTL.

Fits 2 inches barrel small frame 5-shot revolvers with hammer spur.
Ultra-thin four-layer laminate no thicker than conventional suede leather holsters.
Internal moisture barrier won't transmit perspiration to gun.
Suede-like exterior helps anchor holster inside pants or skirt.
Ultra-thin, four-layer laminate no thicker than conventional swede leather holsters.
Belt clip slips over pant top and belt to hold gun securely and anchor gun for positive draw.

TAMPERPROOF-Anchor cannot be removed to provide security for item being attached.
ZINC PLATED-Provides rust resistance for dry applications.
FOR CONCRETE ONLY-Fast, easy and strong fastening into solid concrete.
NO SPECIAL TOOLS NEEDED-Drill the hole drive with a hammer.

TAMPERPROOF-Anchor cannot be removed to provide security for item being attached.
ZINC PLATED-Provides rust resistance for dry applications.
FOR CONCRETE ONLY-Fast, easy and strong fastening into solid concrete.
NO SPECIAL TOOLS NEEDED-Drill the hole drive with a hammer.

...ng a towel hook in the bathroom, hanging up other items or fixing many things around your house. They can be used in concrete, block, brick, and wallboard. Great value and a great asset to have handy for the house projects..
★【HOW TO USE】Drill a hole (depth and diameter in sync with the anchor) with a electric hammer drill, and then insert the anchor through the hole gently. Finally twist the self-tapping screw clockwise with a hammer or screwdriver. Ribs on both side of the anchor serve the function of stabilising anchor tightly in the wall when twisting the screw in. At the same time, the split of anchor would expand to create a snug fit into the wall. So this could provide more holding power..
★【QUALITY AFTER-SALE SERVICE】If you do not satisfy with our products or if you have any questions, please come to us, we would reply you within 12hours. We 100% guarantee to solve all the problems to your satisfaction. FREE REPLACEMENT within 90days..

...good start for an independent life. You must have faith in a new life you are heading towards and also have faith in our products. We believe that your money would be well spent :) if not, contact us anytime. 100% satisfaction..
STEPS TO FOLLOWDrill a hole (depth and diameter in sync with the anchor) with a electric hammer drill, and then insert the anchor through the hole gently. Finally twist the self-tapping screw clockwise with a hammer or screwdriver. Ribs on both side of the anchor serve the function of stabilizing anchor tightly in the wall when screwing in. At the same time, the split of anchor would expand to create a snug fit into the wall. So this could provide more holding power..
QUALITY AFTER-SALE SERVICEIf you do not satisfy with our products or if you have any questions, please come to us, we would reply you within 12hours. We 100% guarantee to solve all the problems to your satisfaction. FREE REPLACEMENT within 90days..